Part Number(s):
MATERIAL SAFETY DATA SHEET 51-000-09
Form WI04-11A Rev. 1
Product Name: Ortho loc & Accu Bond cond Release Date: March 12, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Ortho Loc and Accu Bond conditioner Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
7664-38-2 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components Classification C.A.S. Number Exposure Limits %
Phosphoric acid C; R34 7664-38-2 NA 37
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Corrosive. Irritates the NA NA NA NA
Eye
eyes.
May irritate the skin of NA NA NA NA
Skin
not removed promptly.
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush with running water for at Seek medical attention. NA
Eye
least 15 minutes while keeping the
eyelids open.
Wash promptly with soap and NA NA
Skin
water.
Does not require first aid NA NA
Inhalation
measures.
Drink two glasses of water or milk. Call a physician if a substantial NA
Ingestion
amount has been ingested.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-000-09
Form WI04-11A Rev. 1
Product Name: Ortho loc & Accu Bond cond Release Date: March 12, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F non-flammable LEL: N/A UEL: N/A NA
Self ignition: N/A
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Dry chemical powder, foam, or carbon dioxide. NA
Protection and Procedures for Firefighters
NA
Unusual Fire and Explosion Hazards
Upon combustion irritating gases may form.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Wipe with damp paper towels, discard properly.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
This product is used exclusively for dental purposes by trained personnel.
Storage Practices and Warnings
(掳C / 掳F). Store in ventilated, dry, cool (<22掳C) place.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
NA NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Use protective eye wear. NA
Skin Use protective gloves. NA
Inhalation NA NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-000-09
Form WI04-11A Rev. 1
Product Name: Ortho loc & Accu Bond cond Release Date: March 12, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Viscous liquid. Color: green odorless
Boiling Point >100 掳C / 掳F
Normal Physical State:
Liquid Gas
Melting Point <0 掳C / 掳F
Solid (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
NA miscible <1
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A N/A N/A
Other
Density g/cc: >1. Volatile organic compounds: none.
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
NA
Hazardous Products Produced During Decomposition
NA
Hazardous Polymerization? Conditions to Avoid
Avoid high temperatures (>40掳C) / 掳F
May Occur May Not Occur NA
Stability? Conditions to Avoid
Stable Unstable NA 掳C / 掳F NA
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Eye contact: The product irritates the eyes. Skin contact: May irritate the skin if not removed promptly. Sensitization: No known allergic
reactions on the skin.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
N/A
13. Disposal Considerations
Regulations
Dispose of waste product in a sanitary landfill.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Ortho loc and Accu bond conditioner NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Use normal and customary shipping and transportation methods.
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-000-09
Form WI04-11A Rev. 1
Product Name: Ortho loc & Accu Bond cond Release Date: March 12, 2007
15. Regulatory Information
Federal Regulations
Classification: C Corrosive. Content: Phosphoric acid 37%
Risk phrases: R34; Causes burns.
Protection phrases: S (1/2) 26-45 Keep locked up and out of reach of children. In case of contact with eyes, rinse immediately with plenty of water
and seek medical attention, incase of accident or if you feel unwell seek medical advice immediately. Show label where possible.
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 15/51 Supplier Release: July 1, 1998
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|