Part Number(s):
MATERIAL SAFETY DATA SHEET 97-350-35DS, 97-350-40DS
Form WI04-11A Rev. 1
Product Name: Resilience Acrylic Finish Release Date: November 28,
2005
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Resilience Acrylic Finish Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
NA 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Silica earth heat modified ACGIH TLV: .1 mg/m2 NA 10mg/m2 NA
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA NA NA
Eye
NA NA NA NA NA
Skin
Irritation and soreness in NA NA NA NA
Inhalation
throat and nose. Some
congestion may occur.
Yes NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
Upper respiratory complications
Carcinogenicity (IARC, NTP)
Probable. OSHA Regulated: No
Potential Environmental Effects
This product contains crystalline silica, which is considered to be a chronic health hazard and a possible carcinogen.
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Remove to fresh air. Flush eyes Consult a physician if NA
Eye
with water. conditions persist.
NA NA NA
Skin
NA NA NA
Inhalation
NA NA NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-350-35DS, 97-350-40DS
Form WI04-11A Rev. 1
Product Name: Resilience Acrylic Finish Release Date: November 28,
2005
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F NA LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health-, Flammability- , Reactivity-NA
NA
NA
Extinguishing Media Extinguishing Media to Avoid
NA NA
Protection and Procedures for Firefighters
None
Unusual Fire and Explosion Hazards
None
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Vacuum dust or powder with a HEPA equipped vacuum.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
None
Storage Practices and Warnings
(掳C / 掳F). None
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Local exhaust sufficient to keep powder or dust below PEL N/A
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Safety goggles or glasses NA
Skin Protective gloves not required NA
Inhalation Use NIOSH approved respirator NA
General Hygiene Considerations and Work Practices
Avoid dusting conditions
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
N/A
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-350-35DS, 97-350-40DS
Form WI04-11A Rev. 1
Product Name: Resilience Acrylic Finish Release Date: November 28,
2005
9. Physical and Chemical Characteristics
Appearance Odor
White powder Odorless
Boiling Point 掳C / 掳F NA
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F NA
Solid (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
2.3 Negligible NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
NA NA NA
Other
NA
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Hydrofluoric acid
Hazardous Products Produced During Decomposition
NA
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F NA
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
NA
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
Waste disposal method: As per local, state, or federal guidelines. This material is not hazardous.
Properties (Physical/Chemical) Affecting Disposal
None
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Resilience Acrylic Finish None
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
None NA
Yes No
Other
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-350-35DS, 97-350-40DS
Form WI04-11A Rev. 1
Product Name: Resilience Acrylic Finish Release Date: November 28,
2005
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 170/44 Supplier Release: September 27, 2005
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|