Part Number(s):
MATERIAL SAFETY DATA SHEET 59-600-XX, (59-2 /
Form WI04-11A Rev. 1
300-XX)
Product Name: Sanities .120 Release Date: April 10, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
GAC Sani-ties H2791000
Chemical Name Manufacture / Distributor
Polyurethane polyester elastomer. Chemical family: Thermoplastic GAC International Inc.
polyurethane. Formula: N/A
C.A.S. Number Address
355 Knickerbocker Ave.
26375-23-5
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
26375-23-5 NA 95
No hazardous ingredients. NA NA NA
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA Acute: Mechanical irritation to the NA
Eye
eyes.
Yes
Chronic: N/A
NA NA NA NA NA
Skin
NA NA NA Acute: N/A NA
Inhalation
Chronic: None
Yes
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
(In raw form) :N/A. Exposure limits: N/A. Potential health effects: None known.
Carcinogenicity (IARC, NTP)
N/A
Potential Environmental Effects
Human effects and symptoms of overexposure:
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush eyes with water. See physician if irritation NA
Eye
persists.
Wash off with soap and water. NA NA
Skin
Remove to fresh air. NA NA
Inhalation
NA Contact a physician. NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-600-XX, (59-2 /
Form WI04-11A Rev. 1
300-XX)
Product Name: Sanities .120 Release Date: April 10, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F N/A LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health-1 , Flammability-1 , Reactivity-
NA
NA 0
Extinguishing Media Extinguishing Media to Avoid
Water, dry chemical, carbon dioxide, foam NA
Protection and Procedures for Firefighters
N/A
Unusual Fire and Explosion Hazards
NA
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Shovel or sweep up; put in container.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
Should be stored in clean, dry environment. Other notes: N/A
Storage Practices and Warnings
(掳C / 掳F). Storage temperature: Ambient. Shelf life: N/A. Special sensitivite: Moisture.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Local ventilation. NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Safety glasses NA
Skin None required NA
Inhalation None required NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
None
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-600-XX, (59-2 /
Form WI04-11A Rev. 1
300-XX)
Product Name: Sanities .120 Release Date: April 10, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Physical form: Pellets. Color: Various colors. Odorless/slight
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting 鈥揊reezing point 390-440掳F
Solid NA (Other)
Specific Gravity or Density (H20=1) Solubility in Water pH
1.2 g / cm3 Insoluble N/A
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
NA NA NA
Other
Bulk density: Approx. 10.01 lbs/gal.
% Volatile by volume:
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
None known.
Hazardous Products Produced During Decomposition
By fire: CO2, CO traces of HCN, MDI
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F Instability conditions: None known.
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
None
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
None
13. Disposal Considerations
Regulations
Waste disposal method: Incinerated or landfilled in compliance with environmental regulations.
Properties (Physical/Chemical) Affecting Disposal
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-600-XX, (59-2 /
Form WI04-11A Rev. 1
300-XX)
Product Name: Sanities .120 Release Date: April 10, 2007
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Sanities NA
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
Non-regulated None
Yes No
Other
Technical shipping name: Polyurethane polyester elastomer.
Freight class bulk: N/A
Freight class package: Plastic material.
Product label:
15. Regulatory Information
Federal Regulations
SARA Title III (In raw form) Section 302 Extremely hazardous substances: None
Section 311/312 Hazard categories: None.
Section 313 Toxic chemicals: None
RERA Status: Non-hazardous.
International Regulations
NA
Other
HMIS RATINGS: Health: 1 Flammability: 1 Reactivity: 0
0=minimal, 1=slight, 2=moderate, 3=serious, 4=severe
16. Other Information
Supplier Number: 31/59 Supplier Release: NA
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|