Part Number(s):
MATERIAL SAFETY DATA SHEET 52-800-16
Form WI04-11A Rev. 1
Product Name: NeoBond Gel Etch Release Date: May 3, 2005
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
NeoBond Gel Etch Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
NA 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Phosphoric acid 7664-38-2 NA 37.00
3. Hazard Identification
Emergency Overview
Corrosive
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
High concentrations can NA NA May cause eye irritation. Material is not NA
Eye
cause eye irritation. known to cause significant health
problems.
Prolonged skin exposure NA NA NA NA
Skin
can cause dryness.
High concentrations can NA NA May cause respiratory irritation. NA
Inhalation
cause respiratory Material is not known to cause
irritation. significant health problems.
NA - - - -
Ingestion
NA - - - -
Other
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NTP-no, OSHA- no, IARC- no
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
In case of eye contact, flush with large Consult a physician. NA
Eye
quantities of water for 15 minutes.
In case of skin contact, wash with soap and NA NA
Skin
water.
If irritation occurs, take victim to open air. Get medical attention. NA
Inhalation
In case of ingestion, drink two glasses of water Seek medical attention if a substantial amount has NA
Ingestion
or milk. been ingested. Do not induce vomiting.
NA - -
Other
Note to Physicians (Treatment, Testing, and Monitoring) NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-800-16
Form WI04-11A Rev. 1
Product Name: NeoBond Gel Etch Release Date: May 3, 2005
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F Non-flammable LEL: NA UEL: NA NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health-, Flammability- , Reactivity-NA
NA
NA
Extinguishing Media Extinguishing Media to Avoid
Carbon dioxide, foam or dry chemical.
Protection and Procedures for Firefighters
NA
Unusual Fire and Explosion Hazards
Upon combustion, irritating gases may form.
6. Accidental Release Measures
Containment Techniques
Avoid ground water contamination.
Spill/Leak Clean-Up Procedures and Equipment
Wipe with damp paper towel. Discard properly.
Evacuation Procedures
NA
Special Instructions
Prevent skin/eye contact.
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
No special measures necessary if handled according to instructions.
Storage Practices and Warnings
Keep container tightly closed when not in use. Store at room temperature. Keep material in original packaging. Avoid unnecessary exposure to the
product. At high temperatures toxic fumes of phosphoric acid and phosphorus oxides can be generated.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Use only in well ventilated areas. NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Use protective eyewear. NA
Skin Avoid unnecessary skin contact. Wear latex gloves when handling. NA
Inhalation NA
General Hygiene Considerations and Work Practices
Remove spilled material from skin and clothing. Do not eat or drink when handling this material.
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-800-16
Form WI04-11A Rev. 1
Product Name: NeoBond Gel Etch Release Date: May 3, 2005
9. Physical and Chemical Characteristics
Appearance Odor
Green gel. Odorless.
Boiling Point >100 掳C / 212 掳F
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F NA
Solid GEL. (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
NA Miscible NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
NA NA NA
Other
NA
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Strong caustics, Metals, Sulfides and Sulfites
Hazardous Products Produced During Decomposition
NA
Hazardous Polymerization? Conditions to Avoid
Do not store above 25掳C /77 掳F
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable Heat
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Acute oral toxicity: LD50 (rat)>5000mg/kg
Irritation to eyes: Irritates the eyes.
Irritation of skin: May irritate the skin.
Allergic Effects: May cause allergic reaction on contact with skin.
Other: If swallowed, may cause sore throat and burns of the mouth and throat. Prolonged exposure may cause burns of the respiratory tract; contact
with soft tissues may cause burns.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
There is no specific information on the product. Use according to good working practices, avoiding release of the product into environment.
13. Disposal Considerations
Regulations
May be disposed of in landfill or incinerator. In accordance with local, state and federal regulations.
Properties (Physical/Chemical) Affecting Disposal
Acidic.
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-800-16
Form WI04-11A Rev. 1
Product Name: NeoBond Gel Etch Release Date: May 3, 2005
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
NeoBond Gel Etch None
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
None None
Yes No
Other
Not considered hazardous cargo.
15. Regulatory Information
Federal Regulations
U.S.-O.S.H.A. Status: This material is not hazardous under the criteria of the U.S. Federal Hazard Communication Standard.
International Regulations
NA
Other
Material should be maintained in original containers. Empty containers should not be re-used.
16. Other Information
Supplier Release: October 21st, 2004
Supplier Number: 168/52
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
APPROVALS: [Note: this section is removed and not part of the distributed MSDS sheet after approval is received and released for use.]
____________________________ __________________________
Signature of Director of Division Compliance / Date Signature of Product Manager / Date
Page 4 of 4
|