Part Number(s):
MATERIAL SAFETY DATA SHEET 17-000-05
Form WI04-11A Rev. 1
Product Name: Ideal Impression Guards Release Date: February 28, 2006
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Product name: Impression Protector 17-000-05
Chemical Name Manufacture / Distributor
Styrene-ethylene-butylene-styrene block copolymer GAC International Inc.
C.A.S. Number Address
R70-251-000 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Non-hazardous R70-251-000 N/A 100
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA Acute eye contact: Mechanical NA
Eye
irritation.
Chronic eye contact: None
NA NA NA NA NA
Skin
NA NA NA Acute inhalation: None NA
Inhalation
Chronic inhalation: None
NA NA NA NA NA
Ingestion
Potential health effects: NA NA NA NA
Other
None
Medical Conditions Aggravated by Exposure
None
Carcinogenicity (IARC, NTP)
None
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
N/A N/A N/A
Eye
N/A N/A N/A
Skin
N/A N/A N/A
Inhalation
N/A N/A N/A
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 17-000-05
Form WI04-11A Rev. 1
Product Name: Ideal Impression Guards Release Date: February 28, 2006
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C /455掳F LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health-, Flammability-, Reactivity-NA
NA
NA
Extinguishing Media Extinguishing Media to Avoid
Foam, CO2, Water fog, Dry chemical NA
Protection and Procedures for Firefighters
None
Unusual Fire and Explosion Hazards
NA
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Contain and remove by mechanical means.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
None
Storage Practices and Warnings
Shelf life: 2 years. Special sensitivite, Handling/Storage precautions: None
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
None NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face None NA
Skin None required NA
Inhalation None NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
None
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 17-000-05
Form WI04-11A Rev. 1
Product Name: Ideal Impression Guards Release Date: February 28, 2006
9. Physical and Chemical Characteristics
Appearance Odor
Physical form: Solid. Color: Clear. Odorless
Boiling Point 掳C / 掳F NA
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F N/A
Solid (Other) Freezing Point 掳C / 掳F N/A
Specific Gravity or Density (H20=1) Solubility in Water pH
0.90 (In Water =1) NA NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A NA NA
Other
% Volatile by volume: < 1.0%
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Strong oxidizing agents
Hazardous Products Produced During Decomposition
Carbon monoxide, Carbon dioxide, Propane, Acrolein, Acids, Ketones and Aldehydes are possible from thermal degradation.
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F Instability conditions: Strong-oxidizing agents.
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Toxicity tests have not been conducted on this product.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
None
13. Disposal Considerations
Regulations
Waste disposal method: In accordance to federal, state or local regulations.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Impression Guards NA
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
None Not hazardous by
Yes No
D.O.T. regulations.
Other
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 17-000-05
Form WI04-11A Rev. 1
Product Name: Ideal Impression Guards Release Date: February 28, 2006
15. Regulatory Information
Federal Regulations
SARA TITLE III: SECTION 302
Extremely hazardous substances: None. SECTION 311/312
Hazard categories: None. SECTION 313.
Toxic chemicals: None.
RERA STATUS: Non-hazardous.
International Regulations
NA
Other
HMIS RATINGS: Health 1 Flammability 1 Reactivity 0
0= Minimal 1= Slight 2= Moderate 3= Serious 4= Severe
16. Other Information
Supplier Number: 31/17 Supplier Release: January 7, 2003 Rev: 1
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|