Part Number(s):
MATERIAL SAFETY DATA SHEET 25-300-04/ / 25-300-05
Form WI04-11A Rev. 1
Product Name: Triad Gel Release Date: March 15, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Triad Gel Refer to part number
Chemical Name Manufacture / Distributor
Chemical family: Acrylic GAC International Inc.
C.A.S. Number Address
NA 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
None NA NA NA
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA NA NA
Eye
NA NA NA Material is non-toxic. Skin NA
Skin
irritation is possible in sensitive
individuals. Contact dermatitis can
develop in sensitive individuals.
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush eyes immediately with water Get medical attention.
Eye
for a minimum of 15 minutes.
Wash with soap and water, remove NA NA
Skin
contaminated clothing.
Sensitization: Avoid further
contact.
NA NA NA
Inhalation
NA NA NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-300-04/ / 25-300-05
Form WI04-11A Rev. 1
Product Name: Triad Gel Release Date: March 15, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F N/A LEL: N/A UEL: N/A N/A
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Dry chemical, carbon dioxide, foam, water spray, and water fog.
Protection and Procedures for Firefighters
Fireman should wear protective clothing and self-contained respirators if large amounts are involved.
Unusual Fire and Explosion Hazards
Irritating gases may be released.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
No special procedures required.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
This material should be handled and used only in a manner consistent with the product instructions. Material is sensitive to visible light and will
polymerize to form a hard plastic.
Storage Practices and Warnings
(掳C / 掳F). Do not store near high temperature of ignition sources. Refrigeration prolongs shelf life. Store away from food and beverages.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Use local exhaust when grinding polymerized material. NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
NA
Eye/Face Use safety glasses while grinding.
NA
Skin Users with special skin problems, cuts, or abrasions should wear
protective gloves.
NA
Inhalation Use dust mask while grinding polymerized material to avoid breathing
dust.
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
None necessary.
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-300-04/ / 25-300-05
Form WI04-11A Rev. 1
Product Name: Triad Gel Release Date: March 15, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Clear viscous gel .Tint added if red, blue or pink. Slight ester odor.
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 掳C / -40 掳F
Solid gel (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
1.2 Negligible N/A
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
< 1mm Hg >1 N/A
Other
Critical temp: N/A Decomposition temp: N/A Critical pressure: N/A Perm. Exp.limit: N/A Viscosity: 90,000 cps at 40掳C. % Volatile by vol:
N/A Corrosion rate: N/A Molecular weight: N/A. Magnetism: N/A
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Oxidizing agents.
Hazardous Products Produced During Decomposition
Acid fumes and smoke may result during initial stages of fire.
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F high temperatures.
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F high temperatures, direct sunlight.
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
NA
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
Follow waste disposal procedure. Spread out materials to expose surfaces to sunlight or artificial light until solid, then
dispose as a non hazardous waste.
Neutralizing agent: N/A
Properties (Physical/Chemical) Affecting Disposal
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-300-04/ / 25-300-05
Form WI04-11A Rev. 1
Product Name: Triad Gel Release Date: March 15, 2007
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Triad gel NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
NA
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 40/25 Supplier Release: NA
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|