3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White 10/07/2005
Material Safety Data Sheet
Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
PRODUCT NAME: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/07/2005
Supercedes Date: 05/29/2001
Document Group: 11-2661-4
ID Number(s):
62-2796-1435-8, 62-2796-3530-4, 62-2796-3830-8, 62-2796-6430-4, 62-3593-1430-9, 62-3593-1435-8, 62-
3593-1438-2, 62-3593-3530-4, 62-3593-3830-8, 62-3593-3835-7
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for
each of these components is included. Please do not separate the component MSDSs from this cover page. The document
numbers of the MSDSs for components of this product are:
11-2660-6, 11-2659-8
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
_________________________________________________________________________________________________________
Page 1 of 2
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White 10/07/2005
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________________
Page 2 of 2
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
Material Safety Data Sheet
Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/07/2005
Supercedes Date: 05/29/2001
Document Group: 11-2659-8
Product Use:
Specific Use: Part B of 2-Part Epoxy Adhesive
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
Epoxy Resin 25068-38-6 80 - 90
Acrylic Polymer - N.J.T.S. Registry No. 04499600-5018P Trade Secret 10 - 20
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Paste
Odor, Color, Grade: very mild odor, white
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
_________________________________________________________________________________________________
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Vapors released during curing may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
>=340 潞F [Test Method: Closed Cup]
Flash Point
_________________________________________________________________________________________________
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
Class IIIB Combustible Liquid
OSHA Flammability Classification:
5.2 EXTINGUISHING MEDIA
Material will not burn. Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective equipment (Bunker Gear) and a
self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards: Not applicable. Non-flammable: ordinary combustible material.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical
ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition
source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. Working from around the edges
of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient
absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with an appropriate organic
solvent. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution. Place
in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
For industrial or professional use only. Keep out of the reach of children. Avoid eye contact with vapors, mists, or spray. Avoid
breathing of vapors created during cure cycle. Avoid skin contact with hot material. Avoid breathing of dust created by cutting,
sanding, grinding or machining. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and
water. Contents may be under pressure, open carefully. Keep container closed when not in use. Avoid contact with oxidizing agents.
7.2 STORAGE
Store away from acids. Store away from oxidizing agents.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide ventilated enclosure for heat curing. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Curing
enclosures must be exhausted to outdoors or to a suitable emission control device. Provide appropriate local exhaust when product is
heated.
_________________________________________________________________________________________________
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of vapors created during cure cycle. Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half mask R95 particulate respirator, Half mask or full facepiece air-purifying respirator with N100 particulate
filters, Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-purifying
respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Paste
Specific Physical Form:
very mild odor, white
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
>=340 潞F [Test Method: Closed Cup]
Flash Point
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
>=340 潞F
Boiling point
1.14 g/ml [@ 73 潞F]
Density
No Data Available
Vapor Density
<=27 psia [@ 131 潞F]
Vapor Pressure
1.140 [Ref Std: WATER=1]
Specific Gravity
Not Applicable
pH
No Data Available
Melting point
Nil
Solubility in Water
Not Applicable
Evaporation rate
00 % weight [Test Method: Calculated]
Hazardous Air Pollutants
2 g/l [Test Method: tested per EPA method 24]
Volatile Organic Compounds
<=2 % weight
Percent volatile
2 g/l [Test Method: tested per EPA method 24]
VOC Less H2O & Exempt Solvents
_________________________________________________________________________________________________
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during cure. Do not cure a mass larger
than 50 grams in a confined space to prevent a premature reaction (exothem) with production of intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Ketones During Combustion
Toxic Vapor, Gas, Particulate During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Cure (harden, set, or react) the product according to product instructions.
Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator in the presence of a combustible
material.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
_________________________________________________________________________________________________
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
SECTION 14:TRANSPORT INFORMATION
DP-460
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
All the components of this product are listed on China's Inventory of Chemical Substances.
The components of this product are listed on the Canadian Domestic Substances List.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
_________________________________________________________________________________________________
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part B) 10/07/2005
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 0 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________
Page 7 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
Material Safety Data Sheet
Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/07/2005
Supercedes Date: 05/29/2001
Document Group: 11-2660-6
Product Use:
Specific Use: Part A of 2-Part Epoxy Adhesive
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
4,7,10-trioxatridecane-1,13-diamine 4246-51-9 50 - 60
Epoxy resin 25068-38-6 10 - 30
Modified diglycidyl ether of bisphenol A- N.J.T.S. Registry No. 04499600-5431P Trade Secret 7 - 13
Amorphous silica 7631-86-9 3- 7
2,4,6-tris((dimethylamino)-methyl)phenol 90-72-2 1- 5
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Paste
Odor, Color, Grade: mild pungent odor, clear to pale yellow
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause chemical eye burns. May cause allergic skin reaction.
May cause chemical skin burns. May cause chemical gastrointestinal burns.
3.2 POTENTIAL HEALTH EFFECTS
_________________________________________________________________________________________________
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
Eye Contact:
Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing,
ulcerations, significantly impaired vision or complete loss of vision.
Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Skin Contact:
Corrosive (Skin Burns): Signs/symptoms may include localized redness, swelling, itching, intense pain, blistering, ulceration, and
tissue destruction.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Vapors released during curing may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Corrosion: Signs/symptoms may include severe mouth, throat and abdominal pain; nausea; vomiting; and diarrhea;
blood in the feces and/or vomitus may also be seen.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water for at least 15
minutes. Get immediate medical attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious
person. Get immediate medical attention.
_________________________________________________________________________________________________
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
>=340 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
Class IIIB Combustible Liquid
OSHA Flammability Classification:
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: Not applicable. Non-flammable: ordinary combustible material.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. Contain spill. Collect as much of the spilled material as possible.
Clean up residue with an appropriate organic solvent. Read and follow safety precautions on the solvent label and MSDS. Place in a
closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be under
pressure, open carefully. Avoid breathing of vapors created during cure cycle. Avoid skin contact with hot material. Avoid breathing
of dust created by cutting, sanding, grinding or machining.
7.2 STORAGE
Store away from acids. Store away from flammable and combustible materials.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide ventilated enclosure for heat curing. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Curing
enclosures must be exhausted to outdoors or to a suitable emission control device. Provide appropriate local exhaust when product is
_________________________________________________________________________________________________
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
heated.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of vapors created during cure cycle. Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half mask R95 particulate respirator, Half mask or full facepiece air-purifying respirator with N100 particulate
filters, Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-purifying
respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
Amorphous silica CMRG CEIL 5 mg/m3
2,4,6-tris((dimethylamino)-methyl)phenol CMRG TWA 5 ppm
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Paste
Specific Physical Form:
mild pungent odor, clear to pale yellow
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
>=340 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
>=340 潞F
Boiling point
1.09 g/ml [@ 73 潞F]
Density
3.72 [Ref Std: AIR=1]
Vapor Density
<=27 psia [@ 131 潞F]
Vapor Pressure
1.09 [Ref Std: WATER=1]
Specific Gravity
_________________________________________________________________________________________________
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
Not Applicable
pH
No Data Available
Melting point
Slight (less than 10%)
Solubility in Water
No Data Available
Evaporation rate
10.6 g/l [Test Method: tested per EPA method 24]
Volatile Organic Compounds
<=2 % weight
Percent volatile
10.6 g/l [Test Method: tested per EPA method 24]
VOC Less H2O & Exempt Solvents
8,000 - 13,000 centipoise [@ 73 潞F]
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to
prevent a premature reaction (exothem) with production of intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Amine Compounds During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Oxides of Nitrogen During Combustion
Toxic Vapor, Gas, Particulate During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Cure (harden, set, or react) the product according to product instructions.
Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
_________________________________________________________________________________________________
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
DP-460
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this product are listed on the Canadian Domestic Substances List.
All the components of this product are listed on China's Inventory of Chemical Substances.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
_________________________________________________________________________________________________
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-460, Off-White (Part A) 10/07/2005
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 3 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________
Page 7 of 7
|