P110-20-100
Issue: C
MATERIAL SAFETY DATA SHEET Rev Date: July 05
Page: 1 of 5
PRODUCT NAME : OIL - APIEZON AP303
1. Product and Company Identification
Product Name: Apiezon AP303 oil
Synonyms: None
Item Numbers : Part of Relubrication Kit B580-55-001
10211-303 (used in the manufacture of turbomolecular pumps)
European Contact Details US Contact Details
BOC Edwards, Manor Royal, Crawley, BOC Edwards, 301 Ballardvale Street,
West Sussex, RH10 9LW, England Wilmington, MA 01887
General enquiries General enquiries
UK : +44 (0)1293 528844 +(1) 978-658-5410
France : +(33) 1 47 98 24 01 Toll Free: 1-800-848-9800
Germany : +(49) 89-991918-0
Italy : +(39) 0248-4471 24 h Emergency telephone number:
Chemtrec : 1-800-424-9300
2. Composition/Information on Ingredients
Ingredient % Weight CAS No Hazard class* Risk phrase*
Pentaerythritol fatty acid ester 100 67762-53-2 Not applicable Not applicable
*Hazard class & Risk phrase. These columns are only completed for ingredients which are classified as hazardous
under EU Directive (67/548/EEC, as amended) and are present in sufficient concentration to make the overall
substance hazardous. In all other situations, the column will be completed as 鈥淣ot applicable鈥?.
3. Hazards Identification
EMERGENCY OVERVIEW
This material when properly handled according to good working and hygienic practices is not dangerous to human
health and the environment.
For short and long term exposure effects see Section 11 Toxicological data
Eye Effects: May cause transient irritation.
Skin Effects: Repeated and prolonged exposure may cause skin disorders.
Ingestion/Oral Effects: May cause nausea, vomiting and diarrhoea.
Inhalation Effects: None known. (Low volatility makes inhalation unlikely.)
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known.
705
DCC1 No :
BOC Edwards is part of BOC Limited
The stripe symbol is a trade mark of the BOC Group
Ref 2D01-010 form issue 1.2
.
P110-20-100
Issue: C
MATERIAL SAFETY DATA SHEET Rev Date: July 05
Page: 2 of 5
PRODUCT NAME : OIL - APIEZON AP303
NFPA Hazard codes HMIS Hazard codes Rating System
Health 0 Health 0 0 = No Hazard
Flammability 1 Flammability 1 1 = Slight hazard
Instability 0 Reactivity 0 2 = Moderate Hazard
3 = Serious Hazard
4 = Severe hazard
4. First Aid Measures
Irrigate with copious quantities of water.
Eyes:
Wash with soap and water.
Skin:
Do not induce vomiting. Seek immediate medical attention.
Ingestion/Oral:
If high concentrations of mists or fumes are inhaled, remove the person to fresh air. If
Inhalation:
breathing problems occur, a qualified individual should administer oxygen or artificial
respiration as indicated. Seek immediate medical attention.
None
Other Information:
5. Fire Fighting Measures
Extinguishing Media: Carbon dioxide, dry powder, foam or water fog. Do not use water jets. Direct water
stream may cause violent frothing.
Fire and Explosion Hazard: No unusual hazards identified. No known hazardous decomposition products.
Special Protective Equipment In confined spaces, fire fighters should wear a self-contained breathing apparatus
for Fire Fighters: (SCBA) which meets appropriate standards operated in positive pressure mode,
and full turnout gear.
For Flammability Properties - see Section 9
6. Accidental Release Measures
Contain spill. Soak up spill with absorbent granules before washing area, to prevent slip hazard. Prevent the oil
from entering drains, sewers and water courses.
7. Handling and Storage
Handling: No special precautions required.
Storage: No special precautions required.
705
DCC1 No :
BOC Edwards is part of BOC Limited
The stripe symbol is a trade mark of the BOC Group
Ref 2D01-010 form issue 1.2
.
P110-20-100
Issue: C
MATERIAL SAFETY DATA SHEET Rev Date: July 05
Page: 3 of 5
PRODUCT NAME : OIL - APIEZON AP303
8. Exposure Controls/Personal Protection
Exposure Limits
Ingredient ACGIH - TLV - OSHA - PEL Occupational Exposure
Limits EH40 (UK)
Not applicable Not applicable Not applicable Not applicable
Personal Protection:
Engineering Measures: None required under normal conditions of use.
Respiratory Protection: None required under normal conditions of use.
Hand/Skin Protection: Wear impervious gloves. Avoid prolonged exposure.
Eye/Face Protection: Wear safety glasses/goggles when handling.
Hygiene Measures: Practice good workplace hygiene. Do not eat, drink or smoke when handling.
Wash hands after use and before eating or smoking.
Other/General Protection: None.
9. Physical and Chemical Properties
0
C/ 0F
Appearance and Odour Pale yellow liquid with a faint Boiling Point No data available
sweet odour
0
C/ 0F
pH (as supplied) No data available Freezing Point No data available
0
C/ 0F
Solubility in Water Insoluble Auto Ignition 435 / 815
0
C/ 0F
Volatile Content by Volume No data available Flash Point 275 / 527
0.97 at 20oC/68oF
Specific Gravity
Vapour Pressure (mbar) No data available Vapour Pressure (Torr) No data available
10. Stability and Reactivity
Stability: Stable. Will not polymerise.
Avoid temperatures > 250oC/482oF. Avoid contact with strong oxidising agents.
Material/Conditions to Avoid:
Hazardous Decomposition: No known hazardous decomposition products.
11. Toxicological Information
For a comprehensive description for the various toxicological (health) effects which may arise if the user comes
into contact with the substance or preparation refer to Section 3 Hazards Identification.
Animal Data:
LD50 value: Oral - 5000 mg/kg (Rat), Dermal - 2000 mg/kg (Rabbit)
LC50 value: No data available
705
DCC1 No :
BOC Edwards is part of BOC Limited
The stripe symbol is a trade mark of the BOC Group
Ref 2D01-010 form issue 1.2
.
P110-20-100
Issue: C
MATERIAL SAFETY DATA SHEET Rev Date: July 05
Page: 4 of 5
PRODUCT NAME : OIL - APIEZON AP303
Carcinogenicity:
No known carcinogenic or mutagenic effects.
12. Ecological Information
When the product is used and/or disposed of as indicated, no adverse environmental effects are foreseen.
Mobility: the product is non-volatile in air and is insoluble in water.
The product is biodegradable.
13. Disposal Considerations
Dispose of waste product, spillages, and used containers in accordance with all local, federal and national
requirements. The product may be incinerated.
14. Transport Information
This product is not classified as hazardous for transport by air, sea or road.
PARAMETER EUROPEAN CANADIAN TDG UNITED STATES DOT
Proper Shipping Name Not applicable Not applicable Not applicable
Hazard Class Not applicable Not applicable Not applicable
Identification Number Not applicable Not applicable Not applicable
Shipping Label Not applicable Not applicable Not applicable
15. Regulatory Information
European Regulatory Information
This product has been classified in accordance with the Dangerous Substances Directive (67/548/EEC, as
amended) and the Preparations Directive (88/379/EEC, as amended), implemented in the UK as the Chemical
(Hazard Information and Packing) Regulations 1994 (CHIP, as amended).
Classified as dangerous to supply : No
Risk Phrases : Not applicable
Safety Phrases : Not applicable
Symbols : None
EC (EINECS) number : 2670222
705
DCC1 No :
BOC Edwards is part of BOC Limited
The stripe symbol is a trade mark of the BOC Group
Ref 2D01-010 form issue 1.2
.
P110-20-100
Issue: C
MATERIAL SAFETY DATA SHEET Rev Date: July 05
Page: 5 of 5
PRODUCT NAME : OIL - APIEZON AP303
United States Regulatory Information
All ingredients contained in this product are included on the EPA TSCA Chemical Substance Inventory.
SARA TITLE III - SECTION 313 SUPPLIER NOTIFICATION:
This product does not contain toxic chemicals subject to the reporting requirements of section 313 of the Emergency
Planning and Community Right-To-Know Act (EPCRA) of 1986 and 40 CFR Part 372
California Proposition 65: This product does not contain chemicals known to the State of California to cause cancer
or reproductive harm.
Canadian Regulatory Information
All ingredients contain in this product are included on the Canadian DSL.
WHMIS Classification: Not classified.
16. Other Information
This MSDS is compiled in accordance with ANSI Z400.1 and the EU Safety Data Sheet Directive 91/155/EEC.
Source of information for this data sheet :
鈥? M&I Materials Ltd. "AP303 Oil" Safety Data Sheet, Issue date: January 2004.
Glossary : CAS, Chemical Abstracts Service; NFPA, National Fire Protection Association; HMIS, Hazardous
Material Information Service; LD, Lethal Dose; LC, Lethal Concentration; ACGIH, American Conference of
Governmental Industrial Hygienists; TLV, threshold limit value; OSHA, Occupational Safety and Health
Administration, US department of Labour; PEL, Permissible exposure limit; EH40 (UK), HSE Guidance Note EH40
Occupational exposure limits; PPM, parts per million; TWA, Time-Weighted Average; STEL, Short Term Exposure
Limit; Canadian TDG, Canadian Transportation of Dangerous Goods; US DOT, US Department of Transportation.
HSDB, Hazardous Substances Data Bank; RTECS, Registry of Toxic Effects of Chemical Substances; CHEMID,
Chemical Identification; DSL, Domestic Substances List ; TSCA, Toxic Substances Control Act Public Law 94-469:
CERCLA, Comprehensive Environmental Response, Compensation and Liability Act; EPCRA. Emergency
Planning and Community Right-to-Know Act; CAA, Clean Air Act; US, SARA (Title III), Superfund Amendments
and Reauthorization Act.; SARA 313, Superfund Amendments and Reauthorization Act, Section 313; EHS,
Extremely Hazardous Substance; WHMIS, Workplace Hazardous Materials Information System.
Revisions
___________________________________________________________________________________________
_
Although the information and recommendations in this data sheet are to the best of our knowledge correct, it is recommended that
you make your own determination of the material鈥檚 suitability for your purpose before you use it. The information contained in this
data sheet has been reproduced from the manufacturers data, the accuracy of this information is the responsibility of the
manufacturer. BOC Edwards accept no responsibility for damage of any nature resulting from the use of, or the reliance upon this
data sheet.
705
DCC1 No :
BOC Edwards is part of BOC Limited
The stripe symbol is a trade mark of the BOC Group
Ref 2D01-010 form issue 1.2
.
|