Material Safety Data Sheet
Max-Lube Extreme Service Lubricant
Davis Instruments Corp
1.0 Manufacturer and Product ID
Manufacturer: Davis Instruments Corp.
3465 Diablo Avenue
Hayward CA 94545
510.732.9229
Product Number and Description: #422 MAX-LUBE Extreme Service Lubricant
Chemical Name and Synonyms: N/A
Chemical Family: Synthetic / Iso-Paraffine
Formula: Proprietary
2.0 Hazardous Ingredients
Description % UNIT
Synthetic Lube Basestock, Iso-Paraffinic Lube Basestock
Synthetic additives with Iso-Paraffinic diluents
Contains no hazardous substance within definition of OSHA
Reg. 29 CFR 1910.1200
3.0 Physical Data
Parameter Value
Boiling point: 650 - 800 掳F
< 0.1 mm Hg
Vapor Pressure:
Vapor Density (Air at Sea Level = 1): >1
Solubility in water: Emulsifiable
Dark purple in color, automotive gear oil smell
Appearance and odor:
Specific Gravity (H2O = 1): > 0.87
N/A
Percent volatile by volume:
Evaporation Rate: N/A
4.0 Fire and Explosion Data
Flash point: > 420 潞F
LEL: N/A UEL: N/A
Flammable limits:
Extinguishing media: Dry chemical, Foam, CO2, Water Fog
Positive pressure, self-contained breathing apparatus should be worn.
Special fire fighting procedures:
Unusual fire and explosion hazards: None
5.0 Health Hazard Data
5mg/m3 for synthetic lubricants
Threshold limit value:
Effects of overexposure: Chronic overexposure in persons hypersensitive to
petroleum products may cause redness and irritation of
eyes and skin.
Emergency first aid procedures: In case of contact with eyes, wash with copious
quantities of water. If irritation persists, get medical
MS 422 L-01-0422 Page 1 of 2
Material Safety Data Sheet
Max-Lube Extreme Service Lubricant
attention. Eye irritant only, will not damage eye tissue.
Contact with skin, wash with soap and water. Low order
of toxicity. Ingestion -- do not induce vomiting; call
physician.
6.0 Reactivity Data
Stability: Stable
Incompatibility Strong oxidizers
Hazardous decomposition products: Carbon Monoxide
Hazardous polymerization Will not occur
7.0 Spill or Leak Procedure
Steps to be taken in case material is released or spilled:
Contain spill and keep from entering waterways or sewers. Absorb on porous inert material. Large
quantities can be pumped.
Waste disposal method:
Dispose according to current local, state, and federal regulations for motor oils. Consider recycling.
8.0 Special Protection
Respiratory protection:
None required with adequate ventilation. In enclosed areas, supplied air may be used.
Ventilation:
If mists are present in a confined space, provide adequate ventilation to control level below the permissible
exposure limit.
Protective gloves:
Oil resistant.
Eye protection:
Use splash goggles or safety glasses when eye contact may occur.
Other protective equipment:
If there is a likelihood of oil splashing, an oil resistant apron should be worn to protect clothing.
9.0 Special Precautions
Precautions to be taken in handling and storage:
Normal precautions - keep away from flames, sparks or ignition sources.
Other precautions:
Launder oil-soaked clothing before reuse.
MS 422 L-01-0422 Page 2 of 2
|