MATERIAL SAFETY DATA SHEET
DESILUBE 鈩? 88
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME (TRADE): Desilube 鈩? 88
CHEMICAL NAME: Proprietary
CAS NUMBER: Proprietary
MANUFACTURER: Desilube Technology, Inc.
904 Breezewood Lane
Lansdale, PA 19446
INFORMATION PHONE: 610-792-9460
EMERGENCY PHONE: 215-368-2327
2. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient CAS # Weight %
Trade Secret
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: Odorless and white powder which may irritate the
Skin and respiratory tract. May cause irritation and/or burns to the eyes.
Reacts with acids to form toxic and irritating dioxide gas and/or hydrogen
Sulfide gas. Not flammable.
POTENTIAL HEALTH HAZARDS
SKIN: Dust, solutions or mist may cause skin irritation from repeated or
prolonged contact.
EYES: Dust, solutions or mist may irritate or burn the eyes and cause
temporary conjunctivitis.
INHALATION: Inhalation of product dust or mist may irritate the
respiratory tract. Contact with acids releases sulfur dioxide and/or
hydrogen sulfide gas which may be harmful or deadly if inhaled.
INGESTION: Ingestion may cause irritation of the gastrointestinal tract
and purging, if a large quantity is ingested. Relatively low in
acute toxicity.
DELAYED EFFECTS: None known.
Ingredients found on one of the three OSHA designated carcinogen lists are listed below.
INGREDIENT NAME NTP STATUS IARC STATUS OSHA LIST
No ingredients listed in this section.
4. FIRST AID MEASURES
SKIN: Wash skin with plenty of soap and water. Remove contaminated clothing and wash before reuse.
Get medical attention if irritation persists.
EYES: Flush eyes immediately with water for at least 15 minutes. Get medical attention if irritation
persists.
INHALATION: Promptly remove to fresh air. If breathing is difficult, give oxygen, provided a qualified
operator is available. If symptoms persist, get medical attention.
INGEGTION: If conscious, immediately give 2 to 4 glasses of water and induce vomiting by touching
finger to back of throat. If irritation persists, get medical attention.
1 of 5
ADVICE TO PHYSICIAN: Treat symptomatically.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT: Not flammable
FLASH POINT METHOD: Not applicable
AUTOIGNITION TEMPERATURE: Not applicable
UPPER FLAME LIMIT (volume % in air): Not applicable
LOWER FLAME LIMIT (volume % in air): Not applicable
FLAME PROPAGATION RATE (solids): Not applicable
OSHA FLAMMABILITY CLASS: Not applicable
EXTINGUISHING MEDIA:
Material is not flammable. Use extinguishing media appropriate for material in surrounding
fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
None.
SPECIAL FIRE FIGHTING PRECAUTIONS/INSTRUCTIONS:
Wear NIOSH-approved self-contained breathing apparatus to protect against any release of
toxic and/or irritating fumes. Skin and eye protection should also be provided. Use water-
spray to keep fire-exposed containers cool, and to knock down fumes.
6. ACCIDENTAL RELEASE MEASURES
IN CASE OF SPILL OR OTHER RELEASE: (See section 8 for recommended personal protective
equipment.) Promptly shovel or sweep up material with minimum dusting and shovel into an empty
container with a cover. Cautiously spray residue with plenty of water.
Spills may be reportable to the National Response Center (800-424-8802) and to state and/or local
agencies.
7. HANDLING AND STORAGE
NORMAL HANDLING: (See Section 8 for recommended personal protective equipment).
Avoid contact with skin, eyes and clothing. Do not breathe dust or mist. Use with adequate
ventilation. Wash thoroughly after handling.
STORAGE RECOMMENDATIONS:
Store in a cool, dry, well-ventilated area away from acids and oxidizing agents. Keep container closed
when not in use and protect from physical damage.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS:
Provide local exhaust if dusty or misty conditions exist or if there is a release of sulfur dioxide and/or
hydrogen sulfide gas. Keep incompatible materials out of hoods, ducts, etc.
2 of 5
PERSONAL PROTECTIVE EQUIPMENT
SKIN PROTECTION: For handling dry material, wear cotton gloves and full work clothing,
including long-sleeved shirt and trousers. When
handling solutions, wear impervious gloves and an apron. If contact
with the solution is repeated and/or prolonged, wear full impervious
clothing.
EYE PROTECTION: Wear a hard hat (or other head covering) and chemical safety
glasses/goggles. Do not wear contact lenses.
RESPIRATORY Where required, use a NIOSH-approved respirator for dust,
PROTECTION: mist, sulfur dioxide and/or hydrogen sulfide gas, as conditions
indicate. If sulfur dioxide and/or hydrogen sulfide gas should be
released, use a NIOSH-approved self-contained breathing apparatus
or supplied-air respirator.
ADDITIONAL Eyewash and safety shower is recommended.
RECOMMENDATIONS:
EXPOSURE GUIDELINES
INGREDIENT NAME ACGIH TLV OSHA PEL OTHER LIMIT
No ingredients listed in this section.
1
= Limit established by Desilube Technologies, Inc.
2
= Workplace Environmental Exposure Level (AIHA).
3
= Biological Exposure Index (ACGIH).
OTHER EXPOSURE LIMITS FOR POTENTIAL DECOMPOSITION PROEUCTS:
Sulfur dioxide: OSHA TWA = 5 PPM; ACGIH TLV = 2 PPM; ACGIH STEL = 5 PPM
Hydrogen sulfide: OSHA Ceiling = 20 ppm; ACGIH TLV = 10 ppm;
ACGIHG STEL = 15 ppm
9. PHYSICAL AND CHEMICAL PROPERTIES
Material is (at normal conditions) solid Appearance and Color: Colorless and odorless
over 300鈼
Boiling Point:
over 200鈼
Melting Point: pH: 9 鈥? 11 (8% solution)
Vapor Density (Air = 1): Not applicable Vapor Pressure: Not applicable
over 8% at 25鈼
Solubility in H2O: % Volatile by Volume: Not applicable
Evaporation Rate: Not applicable
Specific Gravity: 2.01
10. STABILITY AND REACTIVITY
NORMALLY STABLE? (CONDITIONS TO AVOID):
Normally stable.
INCOMPATIBILITIES:
Strong oxidizers: causes vigorous exothermic reactions.
Acids: releases sulfur dioxide and/or hydrogen sulfide gas.
HAZARDOUS DECOMPOSITION PRODUCTS:
Sulfur dioxide gas, hydrogen sulfide gas and sodium sulfide residue.
3 of 5
HAZARDOUS POLYMERIZATION:
Will not occur.
11. TOXICOLOGICAL INFORMATION
IMMEDIATE (ACUTE) EFFECTS:
Data not available.
DELAYED (SUBCHRONIC AND CHRONIC) EFFEXCTS:
Data not available.
OTHER DATA:
None.
12. ECOLOGICAL INFORMATION
Data not available.
13. DISPOSAL CONSIDERATIONS
RCRA
Is the unused product a RCRA hazardous waste if discarded? No.
If yes, the RCRA ID number is: Not applicable.
OTHER DISPOSAL CONSIDERATIONS:
Dispose of in accordance with applicable Federal, State and Local regulations.
The information offered in section 13 is for the product as shipped. Use and/or alterations to the product
such as mixing with other materials may significantly change the characteristics of the material and alter
the RCRA classification and the proper disposal method.
14. TRANSPORT INFORMATION
US DOT HAZARD CLASS: Not regulated.
US DOT ID NUMBER: Not applicable.
PROPER SHIPPING NAME: Not applicable.
For additional information on shipping regulations affecting this material, contact the information number
found in Section 1.
15. REGULATORY INFORMATION
Inventory Status
Inventory Status
UNITED STATES (TSCA) Y
CANADA (DSL) Y
EUROPE (EINECS/ELINCS) Y
AUSTRALIA (AICS) Y
JAPAN (MITI) Y
SOUTH KOREA (KECL) Y
CHINA (EICS) Y
PHILIPPINES (PICCS) Y
Y = All ingredients are on the inventory.
E = All ingredients are on the inventory or exempt from listing.
4 of 5
P = One or more ingredients fall under the polymer exemption or are on the no longer polymer
list. All other ingredients are on the inventory or exempt from listing.
N = Not determined or one or more ingredients are not on the inventory and are not exempt from
listing.
FEDERAL REGULATIONS
Inventory Issues:
All functional components of this product are listed on the TSCA Inventory.
SARA Title III Hazard Classes:
Fire Hazard - NO
Reactive Hazard - NO
Release of Pressure - NO
Acute Health Hazard - YES
Chronic Health Hazard - NO
STATE REGULATIONS:
This product does not contain any components that are regulated under California Proposition 65.
16. OTHER INFORMATION
NFPA Codes: HMIS Codes:
Health: 1 Health: 1
Flammability: 0 Flammability: 0
Reactivity: 0 Reactivity: 0
Other: - Other: -
THE ABOVE INFORMATION IS ACCURATE TO THE BEST OF OUR KNOWLEDGE. HOWEVER, SINCE
DATA, SAFETY STANDARDS, AND GOVERNMENT REGULATIONS ARE SUBJECT TO CHANGE AND
THE CONDITIONS OF HANDLING AND USE, OR MISUSE, ARE BEYOND OUR CONTROL, DESILUBE
TECHNOLOGY MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE
COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN AND
DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON. USER SHOULD SATISFY HIMSELF THAT HE
HAS ALL CURRENT DATA RELEVANT TO HIS PARTICULAR USE.
Previous Issue Date: December 15, 2002
Revised Date: July 1, 2007
5 of 5
|