MATERIAL SAFETY DATA SHEET                                 MSDS Number: 347310CB

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: CB-80 EXTRA INSECTICIDE - ALL SIZES - EPA REGISTRATION # 9444-

               175

Manufactured by: Waterbury Companies, Inc.

                  P.O. Box 640

                  Independence, LA 70443

                  24-Hour Emergency Contact:

                  800-424-9300 (CHEMTREC)

2. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components greater than 1.0% (0.1% if carcinogen or suspected carcinogen)

 Component                      CAS#         OSHA PEL ACGIH TLV Other Limits % by wt

 C12-C15 Isoparaffinic          64742-47-8 N.E.          N.E.          300 ppm            <5

 Hydrocarbon                                                           (Exxon)

 Ethane, 1,1-Difluoro-          75-37-6      N.E.        N.E.          1000ppm-           55-65

                                                                       8hrTWA

 Ethanol                        64-17-5      1000 ppm 1000 ppm N.E.                       25-35

                                                         TWA

 Piperonyl Butoxide*            51-03-6      N.E.        N.E.          N.E.               4

 Pyrethrins*                    8003-34-7 5 mg/m3        5 mg/m3       5 mg/m3            0.5

                                                         TWA           OSHA TWA

* This item is NOT a carcinogen, but has been listed to aid in the identification of all pesticide

active ingredients in the product. Actual percentages for these active ingredients have been

listed vs. percent ranges.

3. HAZARDS IDENTIFICATION

Warning! Flammable!

Contents under pressure, do not expose to fire or extreme heat.

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

Read label. Store in a cool dry area away from heat or open flames. Exposure to

temperatures above 130 deg. F. may cause bursting. Do not spray on plastic, painted or

varnished surfaces or directly into electronic equipment such as radios, TV's, computers, etc.

Potential Health Effects:

Routes of Entry: Inhalation: Yes Ingestion: Yes          Skin: Yes

Health Hazards: Health studies have shown many petroleum hydrocarbons pose potential

                 human risks which may vary from person to person. Inhalation of high

                 concentrations of Ethane, 1-1-Difluoro- vapors is harmful and may cause

                 heart irregularities, unconsciousness, or death. Intentional misuse or

                 deliberate inhalation may cause death without warning.

Signs/symptoms Dizziness, headaches, drowsiness, incoordination, eye irritation, dermatitis,

of overexposure: skin disorders, nausea, throat irritation, loss of consciousness, and other

                 nervous system disorders. Prolonged skin contact may cause mild to

                 moderate local redness and swelling.



Revision Date: 3/19/01                 Date Printed: 3/22/01                          Page 1 of 4

MATERIAL SAFETY DATA SHEET                                 MSDS Number: 347310CB

Medical conditions             Skin contact may aggravate an existing dermatitis. Persons

aggravated by exposure:        with a pre-existing disease of the central nervous system or

                               cardiovascular system may have increased susceptibility to the

                               toxicity of excessive exposures.





NFPA Hazard Ratings Fire: 4 Health 1                 Reactivity: 1

NFPA 704 Ratings are subject to interpretation and are only intended for general identification

of the level of the specific hazard. All information must be considered for proper safe

handling of the material.

4. FIRST AID MEASURES

IF SWALLOWED: Call a physician or Poison Control Center immediately. Gastric lavage is

indicated if material was taken internally. Do not induce vomiting. Vomiting may cause

aspiration pneumonia hazard. IF INHALED: Remove victim to fresh air. Apply artificial

respiration if indicated. IF ON SKIN OR CLOTHING: Remove contaminated clothing and

wash before reuse. Wash affected areas with soap and water. Get medical attention if

irritation persists. IF IN EYES: Flush with plenty of water. Get medical attention if irritation

persists.

5. FIRE FIGHTING MEASURES

Extinguishing Media: CO2, dry chemical, or foam

Fire Fighting Procedures: Self contained air supply suggested. Keep containers cool to avoid

                          bursting.

Unusual Fire and Explosion Hazards: Exposure to temperatures above 130 deg.F may cause

                                      bursting.

6. ACCIDENTAL RELEASE MEASURES

If container is ruptured or begins to leak, place in a well-ventilated area free of sparks and

ignition sources. Pesticide that cannot be used according to label instructions must be

disposed of according to all applicable Local, State and Federal procedures.

7. HANDLING AND STORAGE

Read label. Do not apply directly to food. In commercial food handling facilities, cover or

remove any food. In food processing plants, thoroughly wash all equipment, benches,

shelving, etc. where exposed food will be handled. Rinse with potable water. In the home, all

food processing surfaces and utensils should be covered during treatment or thoroughly

washed before use. In medical care facilities, remove all patients. After spraying, ventilate

area for 2 hours before returning patients.

NFPA 30B Aerosol Classification: Level 1 Aerosol

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Protective Gloves: Not required - avoid contact with skin.

Eye Protection: Not required - avoid contact with eyes.

Respiratory Protection: Not required - avoid breathing spray.

Ventilation: Local: As required to keep airborne concentrations below acceptable limits.

             Mechanical: Not required.



Revision Date: 3/19/01                 Date Printed: 3/22/01                          Page 2 of 4

MATERIAL SAFETY DATA SHEET                               MSDS Number: 347310CB

Other protective equipment: Safety glasses recommended to avoid possible contact with

                            eyes.

Protective Work/Hygiene Practices: Follow label instructions.

9. PHYSICAL AND CHEMICAL PROPERTIES

Specific Gravity (H2O=1): 0.9

Vapor Pressure (mm Hg): 4,239

Solubility: Partially soluble.

Appearance/Odor: Dry fog with characteristic pyrethrin odor.

Flashpoint: Non Flammable per flame projection test.

LEL: N/A

UEL: N/A

Boiling Point: N/A

Melting Point: N/A

10. STABILITY AND REACTIVITY

Conditions to Avoid: Open flames and very hot surfaces can cause thermal decomposition.

Incompatible Materials: Strong oxidizers, and alkaline materials, and powdered earth metals -

                        Al, Zn, Be, etc.

Hazardous Decomposition By-products Carbon monoxide, carbon dioxide, hydrofluoric acid,

                                         and carbonyl fluoride.

Hazardous Polymerization Conditions: None known.

11. TOXICOLOGICAL INFORMATION

This product contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen

lists. Any further information on the toxicology of the material can be obtained by contacting

the manufacturer.

12. ECOLOGICAL INFORMATION

Please call the manufacturer for questions concerning the ecological effects of this product

and it's constituents.

13. DISPOSAL CONSIDERATIONS

Do not reuse empty container. This container may be recycled in the few but growing number

of communities where (steel) aerosol can recycling is available. Before offering for recycling,

empty the can by using the product according to the label. (DO NOT PUNCTURE!) If

recycling is not available, wrap the container and discard in the trash. Any remaining or

collected liquid from punctured cans should be disposed of in a safe manner at an approved

facility in accordance with Local, State, and Federal regulations.

14. TRANSPORT INFORMATION

                                                                                     Pkng Grp

            Status        Shipping Name                           Class ID #

DOT (USA):  Regulated     Consumer Commodity (per                 ORM-D N/A          N/A

                          49CFR173.306)

IATA (Air):      Regulated         Consumer Commodity             9        ID8000    N/A

IMDG (Vessel): Regulated           Aerosols                       2        UN1950 N/A



Revision Date: 3/19/01                Date Printed: 3/22/01                         Page 3 of 4

MATERIAL SAFETY DATA SHEET                              MSDS Number: 347310CB

National Motor Freight Classification and LTL Class: 102120-Class 60

15. REGULATORY INFORMATION

This product is authorized for use in plants operating under USDA Inspection and Grading

Programs as a CATEGORY F1 Substance

SARA Title III Section 31 When completing Tier II reports, the following information should be used

Note: See state and local regulations for specifics on reporting requirements for your facility.

This product should be described as:       PURE: N          MIXTURE Y             SOLID: N

                                           LIQUID: Y        GAS: Y

       Physical Hazards: FIRE: Y           PRESSURE: Y           REACTIVITY: N

       Health Hazards:     IMMEDIATE: Y              DELAYED: N

SARA Title III Section 313:

Toxic chemical components subject to the reporting requirements of EPCRA and 40CFR372:

Chemical                                                 CAS/Category   Percent

Piperonyl Butoxide                                       51-03-6        4.00

16. OTHER INFORMATION

Product Sales Information: 800-845-3495

MSDS Information: 985-878-6751

Revision Notes: MSDS revised to comply with ANSI Z400.1-1998 16-Section MSDS format.

N/A = Not Applicable     N.E. = Not Established           MSDS Prepared by K.G.

This Information is provided in good faith, but no warranty, expressed or implied, is made.

The manufacturer believes that it is accurate and to the best of its knowledge, and relates

only to the specific material designated herein.









Revision Date: 3/19/01                 Date Printed: 3/22/01                          Page 4 of 4