MATERIAL SAFETY DATA SHEET
庐 1 of 2
MGK 2/28/2006
Bedlam鈩? Insecticide
McLaughlin Gormley King Company
027911
PRODUCT CODE:
1. CHEMICAL PRODUCT AND COMPANY INFORMATION
027911, EPA REG. NO. : 1021-1767
PRODUCT CODE:
PRODUCT NAME: Bedlam鈩? Insecticide
An Aerosol Insecticide for Killing Bedbugs, Lice, and Dust Mites.
PRODUCT DESCRIPTION:
Mixture
CHEMICAL NAME:
MANUFACTURER: McLaughlin Gormley King Company, 8810 Tenth Avenue North, Minneapolis MN. 55427
(800) 645-6466 or (763) 544-0341
TELEPHONE M-F, 8:00-4:30 CST, 14:00-22:3GMT:
(800) 645-6466 or (763) 544-0341
MSDS & Product Information, 8:00-4:30 CST, 14:00-22:30 GMT:
(800)-424-9300 (703) 527-3887
CHEMTREC U.S. and CANADA: CHEMTREC (ALL OTHER AREAS):
FOR INFORMATION REGARDING MEDICAL EMERGENCIES OR PESTICIDE INCIDENTS CALL THE INTERNATIONAL POISON CENTER AT:
1-888-740-8712 in U.S and CANADA or 952-852-9509 from all other areas
2. COMPOSITION / INFORMATION ON INGREDIENTS
COMPONENT(s) CAS # EXPOSURE LIMITS SARA Title III Sec. 313 % BY WEIGHT
de minimus conc.
庐
026002-80-2 Not established 1.00 0.40
SUMITHRIN
庐
000051-03-6 Not established Not Applicable 1.60
MGK -264
Petroleum Distillates,
064742-47-8 100ppm (525 mg/m鲁) TWA Not Applicable <3
hydrotreated light
1000 ppm (1800 mg / m鲁) TWA
068476-85-7 Not Applicable 10 15
Petroleum Gases, Liquefied
(OSHA, NIOSH, ACGIH)
PEL = Permissible Exposure Limits. TWA = Time Weighted Average (8 hr).
TLV = Threshold Limit Value. STEL = Short Term Exposure Limit (15 min.).
COMMENTS: Ingredients not identified are proprietary or non-hazardous. Values are not product specifications.
3. HAZARDS IDENTIFICATION
POTENTIAL HEALTH EFFECTS: EMERGENCY OVERVIEW
EMERGENCY CAUTION 鈥? FLAMMABLE AEROSOL. Contents under pressure. Do not use or store near heat, sparks, open flame, or
OVERVIEW: any other ignition sources. Harmful if absorbed through the skin. Avoid contact with skin, eyes, and clothing.
Do not expose to temperatures above 130掳F (54.4掳C) as bursting may occur. Do not puncture or incinerate container.
May cause temporary irritation, tearing, and blurred vision.
EYES:
Can cause skin irritation. Can cause a burning or prickling sensation on more sensitive areas (face, eyes, mouth).
SKIN:
Harmful if absorbed through the skin.
SKIN ABSORPTION:
May be harmful if swallowed.
INGESTION:
Excessive inhalation of mists can cause nasal and respiratory irritation.
INHALATION:
None known.
CHRONIC EFFECTS:
None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP,
CARCINOGENICITY:
OSHA or ACGIH as being carcinogens.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
4. FIRST-AID MEASURES
FIRST AID PROCEDURES:
Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5
EYES:
minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or
SKIN:
doctor for treatment advice.
Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-
INHALATION:
to-mouth if possible. Call a poison control center or doctor for further treatment advice.
Immediately call a poison control center or doctor for treatment advice. Have person sip a glass of water if able to swallow. Do not
INGESTION:
induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
For skin effects, a highly efficient therapeutic agent for Pyrethroid exposure is topical application of Tocopherol Acetate
NOTE TO PHYSICIANS:
(Vitamin E).
(800)-424-9300 (703) 527-3887
24 HOUR EMERGENCY PHONE (CHEMTREC): (ALL OTHER AREAS):
MATERIAL SAFETY DATA SHEET
庐 2 of 2
MGK 2/28/2006
Bedlam鈩? Insecticide
McLaughlin Gormley King Company
027911
PRODUCT CODE:
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES:
> 200 潞F/ > 93.3 METHOD: TAG Closed Cup
FLASH POINT: 潞C
This aerosol is NOT classified as FLAMMABLE by the Flame-Extension Test Method described in 16 CFR 1500.45.
LOWER FLAMMABLE LIMIT: not established. UPPER FLAMMABLE LIMIT: not established.
AUTOIGNITION TEMPERATURE: not established.
Under fire conditions this product may support combustion and may decompose to give off toxic gases
HAZARDOUS COMBUSTION PRODUCTS:
such as carbon monoxide, carbon dioxide, and nitrogen oxides.
Foam, carbon dioxide, or dry chemical.
EXTINGUISHING MEDIA:
Treat as an oil fire. Keep personnel removed and upwind of fire. Use a full-faced self-contained breathing
FIRE FIGHTING INSTRUCTIONS:
apparatus along with full protective gear. Keep nearby containers and equipment cool with a water spray.
Contain the run-off, if possible, for proper disposal.
6. ACCIDENTAL RELEASE MEASURES:
Shut off ignition sources. Stop release, if possible without risk. Dike or contain release, if possible, and if immediate response can
SMALL SPILL:
prevent further damage or danger. Isolate and control access to the release area. Take actions to reduce vapors. Absorb with
appropriate absorbent. Clean spill area of residues and absorbent.
Shut off ignition sources. Stop release, if possible without risk. Dike or contain release, if possible, and if immediate response can
LARGE SPILL:
prevent further damage or danger. Isolate and control access to the release area. Take actions to reduce vapors. Collect product into
drums, etc. via drains, pumps, etc. Absorb with appropriate absorbent. Clean spill area of residues and absorbent.
Contaminated absorbent and wash water should be disposed of according to local, state, and federal regulations.
WASTE DISPOSAL METHOD:
RCRA/ CERCLA HAZARDOUS WASTE:
RCRA/ EPA WASTE INFORMATION: None of the ingredients in this product appear on the RCRA lists (40 CFR 261.24, 40 CFR 251.33) or CERCLA
Hazardous Substance List (40 CFR Part 302 Table 302.4).
7. HANDLING AND STORAGE
Do not use or store near heat, sparks, open flame, or any other ignition sources.
GENERAL PROCEDURES:
Take prudent precautions to avoid contact with skin, eyes, and clothing. Take prudent precautions to avoid breathing vapors or spray
HANDLING:
mists of this product. Mechanical ventilation should be used when handling this product in enclosed spaces. Wearing a respirator is not
normally required when handling this material, but recommended in the absence of good mechanical ventilation. Do not contaminate
water, food or feedstuffs by storage, handling or disposal. Read and observe all precautions and instructions on the label.
Store containers upright and closed. Store in areas that are cool, dry and well-ventilated. Keep away from heat, open flame, ignition
STORAGE:
sources, and strong oxidizers. Emptied containers may retain product residues.
KEEP OUT OF REACH OF CHILDREN.
DO NOT SMOKE, EAT, DRINK OR APPLY COSMETICS IN WORK AREA! Wash Promptly if skin becomes
WORK HYGIENIC PRACTICES:
contaminated. Wash at the end of each work shift and before eating, smoking and using the toilet.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Not established by OSHA or ACGIH (see Section 2 for individual components).
EXPOSURE LIMITS:
Mechanical ventilation should be used when handling this product in enclosed spaces. Local exhaust ventilation may
ENGINEERING CONTROLS:
be necessary.
Not normally required. Use in well ventilated areas.
RESPIRATORY PROTECTION:
Take prudent precautions to avoid contact with skin and clothing.
SKIN PROTECTION:
Take prudent precautions to avoid contact with eyes.
EYE PROTECTION:
9. PHYSICAL AND CHEMICAL PROPERTIES
Milky, opaque white liquid. Not available
APPEARANCE: MELTING POINT:
Sweet smell Partially miscible in water. (Non-Volatiles)
ODOR: SOLUBILITY IN WATER:
Liquefied gases and liquid. 0.988 @ 20潞C (68掳F) (Non-Volatiles)
PHYSICAL STATE: SPECIFIC GRAVITY:
Not available Not available
VAPOR PRESSURE: COLOR, (GARDNER):
Heavier than air. 7.43 (Non-Volatiles)
VAPOR DENSITY: pH:
Not available 4.83 CPS @ 25掳C (77掳F)Brookfield on Non-Volatiles
BOILING POINT: VISCOSITY:
<12% Not available
VOC: REFRACTIVE INDEX:
10. STABILITY AND REACTIVITY
Stable. Strong acidic or alkaline materials.
CHEMICAL STABILITY: INCOMPATIBILITY:
Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: HAZARDOUS POLYMERIZATION:
NO, NO2, CO, CO2 gases
11. OTHER INFORMATION
HMIS RATINGS:
We assign HMIS ratings to this product based on the hazards of its ingredient(s). Since the customer is most aware of the applications and conditions of
use, he must ensure that the proper personal protective equipment is provided consistent with information contained in Section鈥檚 7 and 8 of this MSDS.
Health 1
HMIS RATINGS:
Flammability 4
Reactivity 1
The data contained herein are based on information currently available to McLaughlin Gormley King Company and, to the best of our knowledge, are
accurate and based on sound expert opinion. Our statements herein, however, are not to be taken as a warranty or representation for which McLaughlin
Gormley King Company assumes legal responsibility.
Material Safety Data Sheet prepared by T. Azzivitto
(800)-424-9300 (703) 527-3887
24 HOUR EMERGENCY PHONE (CHEMTREC): (ALL OTHER AREAS):
|