Material Safety Data Sheet
Slick Seam
Davis Instruments Corp
1.0 Manufacturer and Product ID
Manufacturer: Davis Instruments Corp.
3465 Diablo Avenue
Hayward CA 94545
510.732.9229
Product Number and Description: #730 Slick Seam
Chemical Name and Synonyms: N/A
Chemical Family: Petrolatum & Microcrystalline Wax NF
Formula: Proprietary
2.0 Hazardous Ingredients
Description % UNIT
None
3.0 Physical Data
Parameter Value
Boiling point: NDA
NDA
Vapor Pressure:
Vapor Density (Air at Sea Level = 1): NDA
Nil
Solubility in water:
Appearance and odor: Soft, greenish-brown, non-aromatic wax.
Specific Gravity (H2O = 1): 0.815-0.89 g/cc @ 60 潞F
0
Percent volatile by volume:
Evaporation Rate (H2 = 1): NDA
N/A
pH:
4.0 Fire and Explosion Data
> 204 潞C, > 410 潞F (ASTM D-92)
Flash point:
Flammable limits: LEL: NDA UEL: NDA
Dry chemical, CO2, foam, waterfog, sand/earth
Extinguishing media:
Special fire fighting procedures: Water spray is unsuitable as an extinguishing agent. Firefighters should
use self-contained breathing apparatus to protect against smoke
inhalation.
Unusual fire and explosion hazards: None
5.0 Health Hazard Data
NDA
Threshold limit value:
Effects of overexposure: NDA
Eyes: Flush immediately with cold water. Contact a physician.
Emergency first aid procedures:
Skin: For molten Slick Seam, flush immediately with cold water.
Contact a physician. For solidified Slick Seam, remove excess with
MS 730 L-01-0730 Page 1 of 2
Material Safety Data Sheet
Slick Seam
paper towels, wash with soap and water. Ingestion: Contact a
physician.
6.0 Reactivity Data
Stability: Stable
Incompatibility Keep away from flame, heat (250 潞F max), and strong oxidizing
agents.
Hazardous decomposition products: Carbon monoxide and carbon dioxide are generated during
combustion.
Hazardous polymerization Will not occur
7.0 Spill or Leak Procedure
Steps to be taken in case material is released or spilled:
Shut off leak and dike up large spills. After cooling and solidification, scrape and/or shovel up material.
Finally, clean area with an oil-absorbent material.
Waste disposal method:
Dispose of in accordance with local, state, and federal regulations.
8.0 Special Protection
Respiratory protection:
NDA
Ventilation:
NDA
Protective gloves:
When molten, wear impervious gloves.
Eye protection:
When molten, wear face shield over protective glasses.
Other protective equipment:
When molten, wear coveralls.
9.0 Special Precautions
Precautions to be taken in handling and storage:
Store away from flame, heat (250 潞F max), and strong oxidizing agents. Avoid skin and eye contact.
Other precautions:
None.
MS 730 L-01-0730 Page 2 of 2
|