Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

2005-09-2

File Name: firth_co_nz---msds_handicrete_mar_06.asp
Firth Industries
585 Great South Rd
PENROSE
AUCKLAND, NEW ZEALAND
Telephone: 64-9-525 9190
Facsimile: 64-9-525 9121
For 24 hour poisons advice, telephone 0800 POISON / 0800 764766.

MATERIAL SAFETY DATA SHEET

IDENTIFICIATION

PRODUCT RANGE: DRICON 鈥? DRY POWDER

TRADE NAMES: HandiCrete

SUPPLIER: FIRTH INDUSTRIES, DRICON

MANUFACTURER: FIRTH INDUSTRIES, DRICON

PRODUCT USE

DIY for small concrete projects

PHYSICAL DESCRIPTION / PROPERTIES

Appearance: Loose material consisting of sand aggregate
and cement.
Boiling Point: Not Relevant
Vapour Pressure: Not Relevant
Melting Point: Not known
Solubility in Water: Soluble
Percent Volatile: Not Relevant

COMPOSITION

Sand < 40%
Basalt aggregate < 50%
Portland cement < 20%




Page 1 of 4 Date issue: 2005-09-20
Firth Industries
585 Great South Rd
PENROSE
AUCKLAND, NEW ZEALAND
Telephone: 64-9-525 9190
Facsimile: 64-9-525 9121
For 24 hour poisons advice, telephone 0800 POISON / 0800 764766.


HEALTH HAZARD INFORMATION

Exposure inhalation, skin and eyes:
The combination of ingredients is classified as inert, respirabe nuisance dust.
Exposure can irritate skin, eyes and mucous membranes. When mixed with
water the product becomes slightly caustic
and can dry the
skin. It may cause inflammation of the cornea and the lining of the
respiratory system.
There are trace amounts of hexavalent chromium present (0-5 p.p.m.). In
sensitized individuals this may cause allergic
dermatitis.
Ingestion: Under normal use conditions no problems
should occur.

EMERGENCY/FIRST AID PROCEDURES:

Inhalation: Move to fresh air. Seek medical attention if effects persist.

Ingestion: Wash mouth and lips with water. Spit out and seek medical
attention.

Eye Contact: Flush with water and seek medical attention.

Skin Contact: Wash exposed areas with soap and water.




Page 2 of 4 Date issue: 2005-09-20
Firth Industries
585 Great South Rd
PENROSE
AUCKLAND, NEW ZEALAND
Telephone: 64-9-525 9190
Facsimile: 64-9-525 9121
For 24 hour poisons advice, telephone 0800 POISON / 0800 764766.


PRECAUTION FOR USE

OSH WORKPLACE EXPOSURE STANDARDS:

Applies to Airborne dust
0.2 mg/m3 respirable dust (8 hour TWA)
Respirable quartz
Particulates not otherwise classified 10 mg/m3 inspirable dust (8 hour TWA)
3 mg/m3 respirable dust (8 hour TWA)

Warning Statement: Irritating to skin, eyes and mucous
membranes.

Provide Ventilation: Good general ventilation is sufficient.
Respiratory Protection: Use approved particle filter mask.
Eye Protection: Use tight fitting protective goggles.
Protective Gloves: Use impervious gloves:

SPECIAL PRECAUTIONS:

鈥? Avoid conditions that will create dust in closed areas.
鈥? Control dust exposures to below the OSH Workplace Exposure Standards
by working methods, ventilation or respiratory protective equipment.
鈥? Use general ventilation unless process creates dust when other dust
reducing methods should be considered for control.




Page 3 of 4 Date issue: 2005-09-20
Firth Industries
585 Great South Rd
PENROSE
AUCKLAND, NEW ZEALAND
Telephone: 64-9-525 9190
Facsimile: 64-9-525 9121
For 24 hour poisons advice, telephone 0800 POISON / 0800 764766.


FIRE AND EXPLOSION DATA:

Non-flammable and non-explosive (Class B). If contaminated, collect in suitable
containers for disposal using an appropriate method e.g. damping with water, to
avoid creating dust. Where dust is created wear a correctly fitted, approved
respirator preferably fitted with a filter for protection against toxic dusts.

STORAGE AND HANDLING

Spills & Waste Disposal Method: Spills of dry product can be cleaned up with broom,
shovel or vacuum, taking care to minimize airborne dust.
Wet product can be hosed down, care should be taken to ensure product
does not enter drainage systems.
Personnel involved in cleaning up spills should protect skin, eyes and
respiratory tract from exposure.

OTHER RELATED INFORMATION

Contact Point: Firth Industries
Telephone 0800 800 576
Ask for occupational health nurse.




Page 4 of 4 Date issue: 2005-09-20

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
fff_saint-gobain_com---op_series_msds.asp N/A
fiberwrap_com---tyfo_fca__msds.asp N/A
fiberwrap_com---tyfo_fcb_msds.asp N/A
fiberwrap_com---tyfo_sa_msds.asp N/A
fiberwrap_com---tyfo_sb_msds.asp N/A
firth_co_nz---firth_handicrete_28aug07.asp 2007-08-2
firth_co_nz---firth_mortar_plaster_28aug07.asp 2007-08-2
firth_co_nz---msds_concrete_dec_05.asp 65997-15-1 14-12-0
firth_co_nz---msds_handicrete_mar_06.asp 2005-09-2
firth_co_nz---msds_mortarplaster_mar_06.asp 2005-09-2
fujifilmsericol_com_au---serijetsj.asp N/A
fujitsu-nt_com---3m-cover_tape-msds.asp N/A
fujitsu-nt_com---ablestik-8340-msds.asp 7440-22-4
fujitsu-nt_com---acme-ecr-msds.asp 9003-55-8 1333-86-4
fujitsu-nt_com---acme-tube_pvc-msds.asp N/A
fujitsu-nt_com---asm_-_lead_frame-msds.asp N/A
fujitsu-nt_com---avery-label-msds.asp N/A
fujitsu-nt_com---cheil-sl7300hx-msds.asp 82-31-4 60676-86-0 14464-46-1 1309-64-4 1333-86-4
fujitsu-nt_com---fusheng-c151_lead_frame-msds.asp 0242-22-7
fujitsu-nt_com---henkel-qmi3555r-msds.asp 7440-22-4 20667-12-3 1309-60-0 1314-62-1 7446-07-3 7439-92-1
fujitsu-nt_com---henkel-qmi_529ht-msds.asp 7440-22-4
fujitsu-nt_com---heraeus-au_wirehd-msds.asp N/A
fujitsu-nt_com---hipec-q14939-msds.asp N/A
fujitsu-nt_com---hitachi-a42_lead_frame-msds.asp N/A
fujitsu-nt_com---hitachi-cel9210hf-msds.asp N/A
fujitsu-nt_com---hitachi-mf202_lead_frame-msds.asp N/A
fujitsu-nt_com---hwayeon-tube-msds.asp 86-21-5
fujitsu-nt_com---jh-c194-msds.asp N/A
fujitsu-nt_com---lead_lock_tape-r970a-msds.asp N/A
fujitsu-nt_com---mth-lead_frame-msds.asp N/A
fujitsu-nt_com---nfme-pure_sn_plating-msds.asp N/A
fujitsu-nt_com---qpl-_cu_with_ag_plate-msds.asp 7440-50-8 7439-89-6 7440-21-3 7439-96-5 7440-02-0 7440-67-7 7723-14-0 7440-66-6 7439-95-4 7439-92-1 7440-47-3 7440-48-8 7440-31-5 7429-90-5 7440-22-4 9003-18-3 79922-55-7 28453-20-5
fujitsu-nt_com---shinon-tray-msds.asp N/A
fujitsu-nt_com---tanaka-al_wire-msds.asp 952-53-2 952-52-6 7429-90-5
fujitsu-nt_com---tanaka-au_wire-msds.asp 952-53-2 952-52-6 7440-57-5
fujitsu-nt_com---winifred-_shielding_bag-msds.asp N/A
fujitsu-nt_com---yihua-_9144-msds.asp 7440-22-4 28064-14-4 2461-15-6
fujitsu-nt_com---yonghong-lead_frame-msds.asp N/A
galmet_com_au---blue_plus_aerosol_msds.asp 64742-88-7 108-88-3 64742-95-6 115-10-6
galmet_com_au---cold_galvanizing_aerosol_msds.asp 115-10-6 108-88-3 64742-95-6 1302-78-9
galmet_com_au---cold_galvanizing_msds.asp 64742-95-6
galmet_com_au---duragal_aerosol_msds.asp 115-10-6 108-88-3 64742-95-6 123-86-4
galmet_com_au---duragal_msds.asp 1330-20-7 64742-95-6 64742-88-7
galmet_com_au---enamel_spray_thinner_300c_msds.asp 64742-95-6
galmet_com_au---etch_thinner_500e_msds.asp 78-93-3
galmet_com_au---fence_gutter_and_facia_aerosol_msds.asp 115-10-6 108-88-3 1330-20-7 123-86-4 141-78-6
galmet_com_au---gloss_shield_clear_gloss_rejuvenator_msds.asp 34590-94-8
galmet_com_au---hammered_metal_finish_aerosol_msds.asp 108-88-3 1330-20-7 67-64-1 115-10-6
galmet_com_au---hammered_metal_finish_msds.asp 64742-82-1
galmet_com_au---industrial_primer_msds.asp 64742-82-1 64742-95-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC