Material Safety data Sheet
Product name : Ag/NiPdAu plated leadframe
Date prepared : Jul 1st 2005
1. Product Identification
Product name Ag/NiPdAu plated leadframe
Chemical family Metal leadframe
Manufacturer ASM Assembly Materials Ltd.
14/F Block A, Wo Kee Hong Bldg.,
585 - 609 Castle Peak Road, Kwai Chung,
Hong Kong
Phone: (852) 2619 4000
Emergency assistance ASM Microelectronic Technical Services(Shanghai) Co.,Ltd.
Suzhou branch Room 05-07/08, Block B, No.5 Xing Han Street,
Suzhou Industrial Park,China
Postal code: 215021
Phone: 86-512-67626278
2. Composition / Information of ingredients (% by weight)
Constituent C7025 A194
Cu BAL BAL
Fe - 2.1-2.6
Co - -
Si 0.25-1.20 -
Mn - -
Ni 2.2-4.2 -
Zr - -
Sn - -
P - 0.015-0.15
Zn - 0.05-0.20
C - -
Mg 0.05-0.30 -
Cr - -
Pb - 0.01MAX
Page 1 of 4
Material Safety data Sheet
Product name : Ag/NiPdAu plated leadframe
Date prepared : Jul 1st 2005
3. Physical properties
Freezing point Not applicable
Vapor pressure (mmHg) Not applicable
Melting point / Boiling point Not applicable
Solubility in water Insoluble in water
Vapor density (Air=1) Not applicable
Evaporation rate Not applicable
Appearance Solid
Odor No odor
4. Fire, explosion, stability and reactivity information
Flash point None
Flammable limits None (LFL: not applicable, UFL: not applicable)
Extinguishing media Leadframe is noncombustible. Use extinguishing media
appropriate to the surrounding fire
Chemical stability Leadframe is a stable material
(conditions to avoid)
Incompatibility Strong Acid (hydrogen gas envolved if contact)
(Materials to avoid)
5. Health hazard information
Inhalation Not applicable
Ingestion Not applicable
Skin Skin contact with this material may cause, in some sensitive
individuals, an allergic response if element such as copper and
nickel are present.
Eye Particulate metal (dust) may be dangerous to the eye and
surrounding tissue.
Toxicity There is no information on the toxicity of this material. Under
normal handling and use of the solid form of this material there
are few health hazards.
Page 2 of 4
Material Safety data Sheet
Product name : Ag/NiPdAu plated leadframe
Date prepared : Jul 1st 2005
6. Emergency and first aid procedures
Inhalation Breathing difficulty caused by inhalation of dust requires remove to fresh air.
If breathing has stopped, perform artificial respiration an dobtain medical
assistance at once.
Ingestion Swallowing metal power or dust can be treated by having the affected
person swallow large quantities of water and attempting to induce vomiting
if conscious. Obtain medical assistance at once.
Skin Skin cuts and abrasions can be treated by standard first aid. Skin
contamination with dust or powder can be removed by washing with soap
and water. If irritation persists, obtain medical assistance at once.
Eye Dust or powder should be flushed from the eyes with copious amounts of
clean water. If irritation persists obtain medical assistance. Contact lenses
should not be worn if working with metal dusts and powders.
7. Exposure control / Personal protection
Ventilation Good general ventilation should be sufficient for most conditions.
Respiratory protection For most conditions, no respiratory protection should be needed;
however, in dusty atmospheres, wear a NIOSH approved
respirator to protect from dust.
Eye protection Wear safety glasses when risk of eye injury is present, for
example, metal powder handling.
Skin protection Wear clean body covering clothing. Wear gloves to prevent metal
cuts and skin abrasions.
Page 3 of 4
Material Safety data Sheet
Product name : Ag/NiPdAu plated leadframe
Date prepared : Jul 1st 2005
8. Handling and storage
Handling Good housekeeping in order to prevent the accumulation of dust
Storage Store in original vacuum sealed packing.
Storage condition: 19 to 25 掳C and relative humidity <= 60%
9. Environmental protection information
Waste disposal Prior to disposal consider if the material has recovery value. Dispose of
method materials in compliance with governmental regulations
Environmental In solid form this material poses on special environmental
hazards problems.
10. Transportation information
Transportation and Not a hazardous material for shipping
hazardous materials
Additional Information
This information in this document is believed to be correct as of the date issued. However, no
warranty of merchantability, fitness for any use, or any other warranty is expressed or is to be
implied regarding the accuracy or completeness of this information, the results to be obtained
from use of this information or the product, the safety of this product, or the hazards related to
its use. This inforamtion and the product are furnished on the condition that the person
receiving them shall make their own determination as to the suitability of the product for their
particular purpose and on the condition that they assume the risk their use thereof.
Page 4 of 4
|