3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated
under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because,
when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or
processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the
performance of the product and may present potential health and safety hazards.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686
MANUFACTURER: 3M
DIVISION: Electronic and Interconnect Solutions Division
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 12/15/2003
Supercedes Date: 08/29/2002
Document Group: 07-1830-4
Product Use:
Specific Use: These products are designed to seal electrical and electronic components into carrier
tapes.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
Polyester Film Tape None 100
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Roll of Tape
Odor, Color, Grade: Clear or Metallized
General Physical Form: Solid
Immediate health, physical, and environmental hazards: The environmental properties of this product present a low
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
environmental hazard. This product, when used under reasonable conditions and in accordance with the 3M directions for use, should
not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for
use may affect the performance of the product and may present potential health and safety hazards.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
No health effects are expected.
Skin Contact:
No health effects are expected.
Inhalation:
No health effects are expected.
Ingestion:
No health effects are expected.
3.3 POTENTIAL ENVIRONMENTAL EFFECTS
This substance does not leach metals or other RCRA (Resource Conservation and Recovery Act) listed TCLP (Toxic Characteristic
Leaching Procedure) hazardous substances at concentrations that would make the product a hazardous waste.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: No need for first aid is anticipated.
Skin Contact: No need for first aid is anticipated.
Inhalation: No need for first aid is anticipated.
If Swallowed: No need for first aid is anticipated.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Not applicable.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid prolonged or repeated skin contact. This product is considered to be an article which does not release or otherwise result in
exposure to a hazardous chemical under normal use conditions. Use general dilution ventilation and/or local exhaust ventilation to
control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection
equipment.
7.2 STORAGE
Store out of direct sunlight. Store at temperatures below 35 degrees C (95 degrees F) and 50% relative humidity.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Not applicable. Avoid eye contact.
8.2.2 Skin Protection
Not applicable.
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
8.2.4 Prevention of Swallowing
Not applicable.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Roll of Tape
Specific Physical Form:
Clear or Metallized
Odor, Color, Grade:
Solid
General Physical Form:
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
Not Applicable
Boiling point
Not Applicable
Vapor Density
Not Applicable
Vapor Pressure
No Data Available
Specific Gravity
Not Applicable
pH
No Data Available
Melting point
Not Applicable
Solubility In Water
0%
Percent volatile
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: None known
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Aldehydes Not Specified
Carbon monoxide Not Specified
Carbon dioxide Not Specified
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous
decomposition products may occur as a result of oxidation, heating, or reaction with another material.
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not applicable.
CHEMICAL FATE INFORMATION
Not applicable.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Reclaim if feasible. If product can't be reclaimed, dispose of waste product in a sanitary landfill.
Alternatively, incinerate the waste product in an industrial, commercial, or municipal incinerator.
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 0 Flammability: 0 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
Reason for Reissue: Addition of 2684 tape
Revision Changes:
Section 1: Product name was modified.
Section 16: Reason for reissue comment was modified.
Section 1: Division name was modified.
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET SMS Cover Tapes 2656, 2658, 2666, 2668, 2672, 2673, 2675, 2678, 2684, 2686 12/15/2003
Copyright was modified.
Section 5: Fire fighting procedures information was modified.
Section 6: Release measures information was modified.
Page Heading: Product name was modified.
Section 12: Ecotoxicological phrase was added.
Section 12: Chemical Fate phrase was added.
Section 12: Ecotoxicological ecotox article information was deleted.
Section 12: Ecotoxicological ecofate information was deleted.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
Page 7 of 7
|