Material Safety Data Sheet
Section 1 Product and Company Identification
Spec Code: AW1112
Product name: Highgloss Paper/AP104/BG40#White imp
Product Use: Pressure Sensitive Label
Manufacturer: Avery Dennison (China) Co. Ltd,.
Kunjia Road
Kunshan Eco.& Tech. Development Zone
Jiangsu Province P.R.China, 215300
Tel: 86-512-57702174
Fax: 86-512-57707448
Section 2 Composion/Information on Components
Name CAS Number Percent
By wt.
Face sheet N/A 45-50
Liner N/A 35-40
Adhesive N/A 10-15
Section 3 Hazardous Identification
This product contains no hazardous ingredients as defined under 94/62/EEC Directive.
Section4 First Aid Measures
The product is an article. exposure is not expected, Cuts are possible when handing this
product, provide first aid as any other cut or abrasion.
Eye: N/A
Skin: N/A
Inhalation: N/A
Ingestion: N/A
Section 5. Fire fighting Measures
Flash Point: N/A LEL: N/A UEL: N/A
Extinguishing Media: Use foam, carbon dioxide or water spray when fighting fired
involving this material.
Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus and
full protective gear.
Unusual Hazards: Combustion of this material may evolve smoke, fumes and
noxious odors.
Product:AW1114
Page 1 of 2
Material Safety Data Sheet
Section 6 Accidental Release Measures
Spill or Release Procedures: Article. No spill or release expected.
Section 7 Handling and Storage
Handling: Lift with proper handing techniques.
Storage: Store in T:23+/-2 C, H:45%~55%.
Section 8 Exposure Control/personal Protection
Personal Protective Equipment:
General: Gloves
Eye/Face Protection: N/A
Skin Protection: Cotton or Leather Gloves
Respiratory Protection: : N/A
Section 9 Physical and Chemical Properties
Adhesive properties: A super tack permanent general purpose adhesive featuring initial
tack and ultimate bond strength.
Face stock Properties a mirror finish cast coated paper for high quality printing.
Liner Properties: A high density brilliant white glassine paper featuring high internal
strength, toughness, tear resistance and excellent transparency.
Section 10. Stability and Reactivity
Chemical Stability: stable
Incompatibility with other Materials: Elevated temperature, heat and sparks
Hazardous Decomposition Products: Smoke, fumes.
Hazardous Polymerization: will not occur.
Section 11 Toxicological Information
No toxicological studies have been performed on this product.
Section 12 Ecological information
No ecological studies have been performed on this product.
Product:AW1114
Page 2 of 2
MATERIAL SAFETY DATA SHEET
GENERAL INFORMATION
Material name: AW3209(Semigloss Paper/AP104/BG40#White )
COMPANY锛圥ART锛?
Avery Dennison (China) Co. Ltd,.
COMPANY锛圡ETERIAL锛?
1. INFORMATION ON INGREDIENTS
Ingredients Percent by weight
45-50%
Face sheet
35-40%
liner
10-15%
Adhesive
2. PHYSICAL CHARACTERISTICS
Adhesive properties: A super tack permanent general purpose adhesive featuring initial tack and ultimate bond
strength.
Face stock Properties: A bright white one side coated art paper for high quality printing.
Liner Properties: A high density brilliant white glassine paper featuring high internal strength, toughness, tear
resistance and excellent transparency.
3. HEALTH HAZARD DATA
ACUTE EFFECTS OF EXPOSURE
INGESTION INHALATION SKIN (CONTACT) EYE (CONTACT)
no no No Harm No harm
EMERGENCY AND FIRST AID PROCEDURES
INGESTION INHALATION SKIN (CONTACT) EYE (CONTACT)
Needless Needless * *
*Cuts are possible when handing this products ,provide first aid as any other cut or abrasion.
4. FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY
Flammable.
EXTINGUISHING MEDIA
Use foam, carbon dioxide or water spray when fighting fired involving this material.
SPECIAL FIRE FIGHTING PROCEDURES
As in any fire, wear self-contained breathing apparatus and full protective gear.
UNUSUAL FIRE AND EXPLOSION HAZARD
Combustion of this material may evolve smoke, fumes and noxious odors.
5. REACTIVITY DATA
STABILITY INCOMPATATIBILITY(MATERIAL TO AVOID): HAZARD POLYMERZATION
Stable elevated temperature ,heat and sparks. Will not occur
CONDITIONS TO AVOID: elevated temperature ,heat and moisture.
HAZARD DECOMPOSITION PRODUCT: Smoke, fumes, noxious odors.
6. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
No spill or release expected.
WASTE DISPOSAL METHOD
May be gathered and returned to specified stations.
7. SPECIAL PROTECTION INFORMATION
VENTILATION: Ventilation Well
RESPIRATORY PROTECTION PROTECTIVE GLOVES EYE PROTECTION
Needless Cotton or leather gloves Glasses
8. SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Lift with proper handing techniques. Store in T: 23+/-2 C, H: 45%~55%.
|