SAFESEAL

                                                                                                   WATER BASED

                                                                                           CURING AND SEALING COMPOUND



SP ECIALTY           CONSTR UCTION                     PRODUCTS                                                         EPA VOC





          P        R         O         D         U         C         T                     D           A     T       A

                                                                    Drying Time @ 70°F./21°C. with 50% R.H.

DESCRIPTION

                                                                        Dry to Touch                     1 hour

SafeSeal is a water based acrylic curing and sealing

                                                                        Light Traffic                   8 hours

compound for concrete. It is V.O.C. compliant and does

                                                                        Heavy Traffic                  12 hours

not contain any hydrocarbon solvents. SafeSeal resists

yellowing and degradation from ultraviolet light while

                                                                    Solids %:                                              16 %

sealing and dustproofing concrete and masonry surfaces.

                                                                    Flash Point:                           >200°F.       >93°C.

USES

� Interior and exterior, horizontal or vertical concrete            Weight per gallon                                    8.4 lbs.

 surfaces                                                            3.8 Kg

� Commercial, industrial or residential structures                  V.O.C. content:                                   128 gm/L

� Concrete brick and block walls or precast members                 ESTIMATING GUIDE              PACKAGING

                                                                                            AND

                                                                    Coverage depends on surface texture, porosity and general

� Exposed aggregate and architectural concrete                      condition.

� Sealing and dustproofing older concrete surfaces in

                                                                    Curing & Sealing New Concrete

 occupied buildings

                                                                                        200 Ft.2/gal        5M2/L

ADVANTAGES

� Virtually no odor during application, nonflammable,               Sealing and Dustproofing Older Concrete

 noncombustible

                                                                                        200-400 Ft.2/gal    5-10 M2/L

� Translucent white appearance during application dries

                                                                    SafeSeal is packaged in 55 U.S. gallon/208 Liter drums and

 to a clear, durable membrane

                                                                    5 gallon/18.9 Liter pails, shipped 36 per pallet shrink wrapped.

� Allows concrete surface to develop full design strength

                                                                    APPLICATION

 by promoting complete hydration during curing process

                                                                    MIXING: Do not dilute. SafeSeal is packaged ready to use and

� Increases abrasion resistance, eliminates dusting                 only requires stirring or agitation prior to use.

� Improves resistance to freeze/thaw cycling, deicers,              APPLICATION: Use a short nap roller or a low pressure airless

 salts and other mild chemicals                                     sprayer equipped with a fan nozzle. Hold sprayer tip 6-8 in/

                                                                    15-20 cm from the surface of the concrete. Apply uniformly

TECHNICAL DATA                                                      leaving no pinholes or gaps but avoid over applying or

� ASTM C 309, Type 1, Class A or B, Standard Specifica-             puddles.

  tion for Liquid Membrane-Forming Compounds for

  Curing Concrete                                                   CURING: Apply SafeSeal after all bleed water has dissipated

                                                                    and application will not mar surface. Optional second coat

� Complies with National Volatile Organic Compound

                                                                    should be applied at right angles to first coat. Second coat

  Emission Standards for Architectural Coatings, Fed-

                                                                    will enhance the surface gloss and provide additional pro-

  eral EPA Regulation 40 CFR Part 59

                                                                    tection from deicing chemicals, oils and greases.









                                                                                                                     Revised 7/1/99

            ChemMasters                                                                                                 G�10

            An American Owned & Operated Company

            300 EDWARDS STREET � MADISON, OHIO 44057-3112

            (440) 428-2105 � FAX (440) 428-7091 � ORDER LINE: (800) 486-7866

                                                                                                     � Not recommended for brick or concrete pavers.

FORMED CONCRETE WALLS: If walls are not to receive further

treatment, apply immediately after stripping forms or

                                                                                                     � Do not use if ambient or surface temperature is below

following rubbing operations.

                                                                                                        40°F./4°C. For best results, warm material to 50°F./

OLDER CONCRETE AND MASONRY: Clean thoroughly with                                                       10°C. prior to application.

detergent and high pressure water, removing any dirt,

                                                                                                     � Quality curing or sealing compounds and floor treat-

dust, curing or sealing membranes, paints, oil, grease or

                                                                                                        ments may darken or highlight the subtle color variations

other contaminants that may prevent adhesion of the

                                                                                                        naturally present in concrete. When the difference in

SafeSeal. Allow surface to dry prior to application.

                                                                                                        shading caused by absorptive deviation or finishing

CLEANUP                                                                                                 techniques is objectionable, consult ChemMasters tech-

                                                                                                        nical staff prior to concrete placement for

Equipment used in applying SafeSeal may be cleaned

                                                                                                        recommendations.

with soap and water prior to drying.

                                                                                                    STORAGE

LIMITATIONS

� Although SafeSeal is compatible with most resilient                                               Protect from freezing. Store tightly closed containers in

                                                                                                    warm, dry area. Shelf life is one year from date of

   floor covering adhesives, it is not for use on surfaces to

                                                                                                    manufacture

   receive concrete overlays or other such toppings.

   Consult ChemMasters Technical Service department

                                                                                                    CAUTIONS

   for compatibility with other surface treatments.

                                                                                                    May cause skin, eye and respiratory tract irritation. Keep

� SafeSeal is not to be used as a bond breaker on tilt-wall                                         out of reach of children.

   construction.

                                                                                                    All label precautions and MSDS must be fully understood

� During periods of prolonged wetness, SafeSeal may                                                 before using this product.

   blush or whiten but clears as membrane and surfaces

   dry. This does not effect the performance or durability

   of the sealer.

� Do not apply SafeSeal to surfaces subjected to con-

   stant moisture and dampness where appearance is

   important. Consult ChemMasters for alternate product

   recommendations.









                                       This Product is Formulated and Labeled for Industrial and Commercial Use Only

                                               FOR BEST RESULTS AND SAFEST USAGE, USER IS SPECIFICALLY DIRECTED TO CONSULT

                                               THE CURRENT MATERIAL SAFETY DATA SHEET AND PACKAGE LABEL FOR THIS PRODUCT





We warrant our products to meet our published specifications and to be free from defects in materials and workmanship to the acceptable quality levels defined in these specifications. If

acceptable quality levels are not specified, the acceptable quality levels will be those normally supplied by us for the product. We make no guarantee of the results to be obtained from the use

of our products. The determination as to the adaptability of any of our products to the specific needs of the Buyer is solely Buyer's prerogative and responsibility. We are glad to offer

suggestions on the use of our products. Nevertheless, there are no warranties given except such expresses warranties offered in connection with the sale of a particular product. Our liability

shall be limited to replacement of, or refund of an amount not to exceed the purchase price attributed to, the goods as to which such claim is made. Our selection of one of these alternatives

shall be Buyer's exclusive remedy. IN NO CASE SHALL WE BE LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, CO-CONDITIONS AND REPRESENTATIONS, EITHER EXPRESSED

OR IMPLIED, WHETHER ARISING UNDER ANY STATUTE, COMMON LAW, USAGE OR TRADE, COURSE OF DEALING OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

        ChemMasters

©1999                                                                                                                                                                           Printed in U.S.A.