SAFE-SLIP /
SAFE-SLIP CONCENTRATE
WATER EMULSION FORM RELEASE AGENTS
SPECIALTY CONSTRUCTION PRODUCTS
PRODUCT DATA
TECHNICAL DATA
Safe-Slip is dual action, emulsified concrete form
release agent. Safe-Slip is packaged ready-to- Concentrate Ready-to-Use
use. Safe-Slip Concentrate is highly concentrated. Color Amber White
-15oF 32 o F
One 5 gallon pail of Safe-Slip Concentrate can be Freeze Temp
>145 oF
mixed with 50 gallons of water to make an ex- Flash Point N/A
tremely effective release agent suitable for use Viscosity (cp) 72 2
with all types of forming materials. Safe-Slip Con- Density 7.5 lb/ga 8.3 lb/ga
centrate must be diluted with clean water before V.O.C. Content 0 gm/L 0 gm/L
use.
PACKAGING
USE
Safe-Slip and Safe-Slip Concentrate are available
鈥? Permits easy, stain-free removal of forms and
in 5 U.S. gallon (18.9 liter) pails, shipped 36 per
formliners including elastomeric, PVC and EPS.
pallet shrink wrapped and 55 U.S. gallon (208 liter)
drums.
鈥? Reduces bugholes in poured-in-place architec-
tural and precast concrete
ESTIMATING GUIDE
鈥? Prevents concrete from sticking to equipment
such as paving machines, bucket hoists, con- Coverage rates for Safe-Slip or Safe-Slip Concen-
crete pumps and buggies trate after dilution.
ADVANTAGES Ft2/gal M2/L
Wood, Plywood, EPS 1000 20
鈥? Zero V.O.C. content, meets all federal and state
HDP 1200 29
standards for emissions
PVC, Plastic finishes 2000 49
鈥? Will not stain white or light colored architectural Metal, Smooth fiberglass 2000 49
or precast concrete
鈥? Does not interfere with adhesion of caulk, archi- DIRECTIONS
tectural coatings, paint, sealers and curing com- SURFACE PREPARATION: Forms to be coated must be
pounds when properly applied. clean and free of any dust, dirt, laitance, hardened
concrete or residue that might discolor new con-
鈥? Dual action-barrier and lightly reactive
crete.
鈥? Made with biodegradable oils
MIXING: Safe-Slip should be mildly agitated
鈥? Low odor formulation immediatly prior to use to ensure a homogeneous
mixture. Shaking 5 gallon pails or rolling drums is
鈥? Extends the life of forms, inhibits oxidation of
sufficient.
metal forms
Safe-Slip Concentrate must be diluted with clean
鈥? Clings better to vertical surface
water prior to application. Pour 5 gallons of Safe-
Slip Concentrate into an open head 55 gallon
鈥? Reduces labor cost of stripping and cleaning
drum. Add 50 gallons of water. Safe-Slip Concen-
forms and equipment
trate mixes easily with water. Generally, the addi-
鈥? Reduces incidences of skin rashes tion of the water will supply enough mixing action
鈥? Economical when compared to solvent-based
formulations
Revised April 2008
ChemMasters
An American Owned & Operated Company
300 EDWARDS STREET 鈥? MADISON, OHIO 44057-3112
(440) 428-2105 鈥? FAX (440) 428-7091 鈥? ORDER LINE: (800) 486-7866
LIMITATIONS
to thoroughly blend the product. If a layer of oil
appears on the surface, additional mixing may 鈥? Do not use as a tilt up bond breaker.
be required with a paddle or by rolling the drum.
鈥? Do not over apply. Excess release agent can
APPLICATION: Apply ready to use Safe-Slip or di- cause defects, voids and bugholes on formed
luted Safe-Slip Concentrate with a brush, roller surface.
or pressurized sprayer. Application should be
鈥? In cold weather, protect from freezing. Condi-
done just minutes before concrete is placed or
tion material to 50掳F (10掳C) prior to applica-
up to 7 days before if treated surface is protected
tion.
from precipitation. Wipe off excess and drips
with a clean, soft rag. 鈥? Not recommended for forms or formliners made
from expanded polystryene, SBR or natural
NOTE: Too much release agent may cause
rubber
bugholes or wormtracks in the concrete or cause
difficulty in stripping. Apply Safe-Slip no thicker 鈥? Rain and other types of precipitation will wash
than 1,000 square feet per gallon. Power spray- Safe-Slip off treated forms.
ers are preferred in other to apply thin films. If
CAUTION
using a pump-up sprayer, use a tip that will spray
no more than 1/2 gallon per minute and keep the Cause eye irritation on direct contact. Overex-
sprayer fully pumped. posure may cause skin and respiratory tract
irritation. Do not take internally. Keep out of
NEW WOOD FORMS: Apply initial coat of Safe-Slip at reach of children.
a rate of 1000 Ft.2 per gallon (20 M2 per liter) and
do not wipe. Allow release agent to absorb into All label precautions and the MSDS must be
wood surface. For extremely porous forms, a read and fully understood before using this
second saturation coat may be necessary prior product.
to first use. Allow forms to dry and recoat and
wipe excess as stated above.
CLEANUP
Clean tools and equipment used to apply Safe-
Slip with detergent and warm water.
STORAGE
Safe-Slip Concentrate is unharmed by freezing.
Ready-to-use Safe-Slip or diluted Safe-Slip Con-
centrate will freeze. Allow the frozen material to
thaw and remix before using.
SHELF LIFE:
Shelf life of both ready-to-use Safe-Slip and
Safe-Slip Concentrate is two years from date of
manufacture.
This Product is Formulated and Labeled for Industrial and Commercial Use Only
FOR BEST RESULTS AND SAFEST USAGE, USER IS SPECIFICALLY DIRECTED TO CONSULT
THE CURRENT MATERIAL SAFETY DATA SHEET AND PACKAGE LABEL FOR THIS PRODUCT
We warrant our products to meet our published specifications and to be free from defects in materials and workmanship to the acceptable quality levels defined in these specifications. If acceptable quality levels
are not specified, the acceptable quality levels will be those normally supplied by us for the product. We make no guarantee of the results to be obtained from the use of our products. The determination as to
the adaptability of any of our products to the specific needs of the Buyer is solely Buyer's prerogative and responsibility. We are glad to offer suggestions on the use of our products. Nevertheless, there are
no warranties given except such expresses warranties offered in connection with the sale of a particular product. Our liability shall be limited to replacement of, or refund of an amount not to exceed the purchase
price attributed to, the goods as to which such claim is made. Our selection of one of these alternatives shall be Buyer's exclusive remedy. IN NO CASE SHALL WE BE LIABLE FOR CONSEQUENTIAL OR
SPECIAL DAMAGES, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
CO-CONDITIONS AND REPRESENTATIONS, EITHER EXPRESSED OR IMPLIED, WHETHER ARISING UNDER ANY STATUTE, COMMON LAW, USAGE OR TRADE, COURSE OF DEALING OR
OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
ChemMasters
漏1997 Printed in U.S.A.
|