**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10424-65-4 |Tetramethylammonium hydroxide pentahyd| 97.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).Corrosive.
Potential Health Effects
Eye:
Causes severe eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Discard contaminated clothing in a manner which limits further
exposure.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10424-65-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white to off-white
Odor: ammonia-like
pH: Basic in solution.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Decomposes.
Freezing/Melting Point: 65.0-68.0 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.829
Molecular Formula: C4H12NOH.5H2O
Molecular Weight: 181.1641
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to moist air or
water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen, ammonia,
amines.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 10424-65-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetramethylammonium hydroxide pentahydrate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE
Hazard Class: 8
UN Number: 1835
Packing Group: II
IMO
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE, LIQUID or SOLID
Hazard Class: 8
UN Number: 1835
Packing Group: II
RID/ADR
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE
Hazard Class: 8
UN Number: 1835
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10424-65-4: No information available.
Canada
CAS# 10424-65-4 is listed on Canada's NDSL List.
CAS# 10424-65-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10424-65-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/24/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
8-Hydroxyjulolidine
| 41175-50-2 |
|
(R)-2-Hydroxybutyl p-tosylate, 98+%
| 103745-07-9 |
|
TETRACHLOROETHYLENE DENSITY STANDARD
| 127-18-4 |
|
Tetrachloroethylene, 98% (GC)
| 127-18-4 |
|
Tetraethylammonium Bromide, 98%
| 71-91-0 |
|
Tetrahydrofuran, P.A., Stabilized with 0.025% BHT
| 109-99-9 |
|
Tetrahydrofuran, anhydrous, 99.9% Packaged under nitrogen. Stabilized
| 109-99-9 |
|
Tetrahydrofuran, 99.5+%, spectrophotometric grade
| 109-99-9 |
|
Unpreserved Tetrahydrofuran
| 109-99-9 |
|
Tetrahydroxy-P-Quinone Monohydrate, 99% (Titr.)
| 319-89-1 |
|
Ethyl L-Lactate,95% (GC)
| 687-47-8 |
|
N,N'-Dicyclohexylcarbodiimide, 99%
| 538-75-0 |
|
Tetramethylammonium hydroxide pentahydrate , 97% (48-52 wt% tma-oh)
| 10424-65-4 |
|
Tetramethylammonium hydroxide, 10% in water
| 75-59-2 |
|
Triphenyl phosphate
| 115-86-6 |
|
Benzamide, 99%
| 55-21-0 |
|
Thiosalicylic Acid, 98%
| 147-93-3 |
|
4-Iodobenzoic acid, 98%
| 619-58-9 |
|
Thiamine Hydrochloride, 98.5-101.5% (on the Anhydrous Substance)
| 67-03-8 |
|
Mercaptoacetic Acid, 98%
| 68-11-1 |
|
Mercaptoacetic acid
| 68-11-1 |
|
P-Anisidine, 99%
| 104-94-9 |
|
Thiourea, 99%
| 62-56-6 |
|
Thiourea, Reagent ACS, 99+% (Titr.)
| 62-56-6 |
|
Sebacoyl Chloride, Tech. 90-95% Active Chlorine
| 111-19-3 |
|
Quinaldine, 97%
| 91-63-4 |
|
Toluene, 99%
| 108-88-3 |
|
Toluene, Scintillation Grade
| 108-88-3 |
|
Tetrapropylammonium Chloride, 94% (Titr.)
| 5810-42-4 |
|
Toluene, Reagent ACS, Spectro Grade, 99.5% (GC)
| 108-88-3 |
|
Toluene, Reagent ACS
| 108-88-3 |
|
Toluene for HPLC
| 108-88-3 |
|
Himic anhydride, 99%
| 826-62-0 |
|
Tributyl Phosphate, 99%
| 126-73-8 |
|
Tributylamine, 99%
| 102-82-9 |
|
4-Picoline, 98%
| 108-89-4 |
|
Trichloroethylene, 99+% (Stabilized)
| 79-01-6 |
|
Titanium Rod 6.35mm Diam. 99.97%
| 7440-32-6 |
|
3-Amino-1H-1,2,4-triazole
| 61-82-5 |
|
Alizarin Complexone Dihydrate, Indicator Grade
| 3952-78-1 |
|
Phenylphosphate, disodium salt dihydrate, 98%
| 3279-54-7 |
|
Toluene-d8, 99+ atom % D
| 2037-26-5 |
|
Toluene-d8, packaged in 0.50 ml ampules, 100.0 atom % D
| 2037-26-5 |
|
Farnesol, mixture of isomers, 96%
| 4602-84-0 |
|
2,4-Dihydroxybenzaldehyde, 98%
| 95-01-2 |
|
tris-(Hydroxymethyl)-aminomethane, 99+%
| 77-86-1 |
|
Tris(hydroxymethyl)aminomethane, reagent acs
| 77-86-1 |
|
Hexyl alcohol
| 111-27-3 |
|
Sodium phosphate, tribasic dodecahydrate, p.a.
| 7601-54-9 |
|
4-Nitro-1,2-Phenylenediamine, 98%
| 99-56-9 |
|
|