Search   
MSDS 
:
 Phenylphosphate, disodium salt dihydrate, 98%
CAS 
:
 3279-54-7
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3279-54-7 |Phenyl phosphate, disodium salt dihydr| 98.0 | 221-917-4 |
| |ate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3279-54-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C6H5O4PNa2.2H2O
Molecular Weight: 254.09

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3279-54-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Phenyl phosphate, disodium salt dihydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3279-54-7: No information available.
Canada
CAS# 3279-54-7 is listed on Canada's NDSL List.
CAS# 3279-54-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3279-54-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Hydroxyjulolidine 41175-50-2
(R)-2-Hydroxybutyl p-tosylate, 98+% 103745-07-9
TETRACHLOROETHYLENE DENSITY STANDARD 127-18-4
Tetrachloroethylene, 98% (GC) 127-18-4
Tetraethylammonium Bromide, 98% 71-91-0
Tetrahydrofuran, P.A., Stabilized with 0.025% BHT 109-99-9
Tetrahydrofuran, anhydrous, 99.9% Packaged under nitrogen. Stabilized 109-99-9
Tetrahydrofuran, 99.5+%, spectrophotometric grade 109-99-9
Unpreserved Tetrahydrofuran 109-99-9
Tetrahydroxy-P-Quinone Monohydrate, 99% (Titr.) 319-89-1
Ethyl L-Lactate,95% (GC) 687-47-8
N,N'-Dicyclohexylcarbodiimide, 99% 538-75-0
Tetramethylammonium hydroxide pentahydrate , 97% (48-52 wt% tma-oh) 10424-65-4
Tetramethylammonium hydroxide, 10% in water 75-59-2
Triphenyl phosphate 115-86-6
Benzamide, 99% 55-21-0
Thiosalicylic Acid, 98% 147-93-3
4-Iodobenzoic acid, 98% 619-58-9
Thiamine Hydrochloride, 98.5-101.5% (on the Anhydrous Substance) 67-03-8
Mercaptoacetic Acid, 98% 68-11-1
Mercaptoacetic acid 68-11-1
P-Anisidine, 99% 104-94-9
Thiourea, 99% 62-56-6
Thiourea, Reagent ACS, 99+% (Titr.) 62-56-6
Sebacoyl Chloride, Tech. 90-95% Active Chlorine 111-19-3
Quinaldine, 97% 91-63-4
Toluene, 99% 108-88-3
Toluene, Scintillation Grade 108-88-3
Tetrapropylammonium Chloride, 94% (Titr.) 5810-42-4
Toluene, Reagent ACS, Spectro Grade, 99.5% (GC) 108-88-3
Toluene, Reagent ACS 108-88-3
Toluene for HPLC 108-88-3
Himic anhydride, 99% 826-62-0
Tributyl Phosphate, 99% 126-73-8
Tributylamine, 99% 102-82-9
4-Picoline, 98% 108-89-4
Trichloroethylene, 99+% (Stabilized) 79-01-6
Titanium Rod 6.35mm Diam. 99.97% 7440-32-6
3-Amino-1H-1,2,4-triazole 61-82-5
Alizarin Complexone Dihydrate, Indicator Grade 3952-78-1
Phenylphosphate, disodium salt dihydrate, 98% 3279-54-7
Toluene-d8, 99+ atom % D 2037-26-5
Toluene-d8, packaged in 0.50 ml ampules, 100.0 atom % D 2037-26-5
Farnesol, mixture of isomers, 96% 4602-84-0
2,4-Dihydroxybenzaldehyde, 98% 95-01-2
tris-(Hydroxymethyl)-aminomethane, 99+% 77-86-1
Tris(hydroxymethyl)aminomethane, reagent acs 77-86-1
Hexyl alcohol 111-27-3
Sodium phosphate, tribasic dodecahydrate, p.a. 7601-54-9
4-Nitro-1,2-Phenylenediamine, 98% 99-56-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net