Search   
MSDS 
:
 Titanium Rod 6.35mm Diam. 99.97%
CAS 
:
 7440-32-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-32-6 |Titanium | 99.97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Moisture sensitive.Air sensitive.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
May cause irritation of the digestive tract. Low hazard for usual
industrial handling.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Chronic inhalation of fine dusts may cause lung damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT use water directly on fire. Do NOT use carbon dioxide. Use
agent most appropriate to extinguish fire. Do NOT get water inside
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Provide ventilation. Place under an inert atmosphere. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Handle under an inert atmosphere. Store protected from
air. Do not allow contact with water. Keep from contact with moist
air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Do not expose to air. Store protected from
moisture. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Use process enclosure, local exhaust
ventilation, or other engineering controls to control airborne
levels.
Exposure Limits
CAS# 7440-32-6:

Russia: 10 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: silver
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 3277 deg C @ 760.00mm Hg
Freezing/Melting Point: 1677 deg C
Autoignition Temperature: > 1200 deg C (> 2,192.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Ti
Molecular Weight: 47.88

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, aluminum, bromine trifluoride, carbon
dioxide, chlorinated solvents, halocarbons, halogens, nitric acid,
silver fluoride, oxygen, sodium chlorate, moisture, air, metal
oxides.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, titanium/titanium oxides.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-32-6: XR1700000
LD50/LC50:
Not available.
Carcinogenicity:
Titanium -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7440-32-6: No information available.
Canada
CAS# 7440-32-6 is listed on Canada's DSL List.
CAS# 7440-32-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-32-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/20/1998 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Hydroxyjulolidine 41175-50-2
(R)-2-Hydroxybutyl p-tosylate, 98+% 103745-07-9
TETRACHLOROETHYLENE DENSITY STANDARD 127-18-4
Tetrachloroethylene, 98% (GC) 127-18-4
Tetraethylammonium Bromide, 98% 71-91-0
Tetrahydrofuran, P.A., Stabilized with 0.025% BHT 109-99-9
Tetrahydrofuran, anhydrous, 99.9% Packaged under nitrogen. Stabilized 109-99-9
Tetrahydrofuran, 99.5+%, spectrophotometric grade 109-99-9
Unpreserved Tetrahydrofuran 109-99-9
Tetrahydroxy-P-Quinone Monohydrate, 99% (Titr.) 319-89-1
Ethyl L-Lactate,95% (GC) 687-47-8
N,N'-Dicyclohexylcarbodiimide, 99% 538-75-0
Tetramethylammonium hydroxide pentahydrate , 97% (48-52 wt% tma-oh) 10424-65-4
Tetramethylammonium hydroxide, 10% in water 75-59-2
Triphenyl phosphate 115-86-6
Benzamide, 99% 55-21-0
Thiosalicylic Acid, 98% 147-93-3
4-Iodobenzoic acid, 98% 619-58-9
Thiamine Hydrochloride, 98.5-101.5% (on the Anhydrous Substance) 67-03-8
Mercaptoacetic Acid, 98% 68-11-1
Mercaptoacetic acid 68-11-1
P-Anisidine, 99% 104-94-9
Thiourea, 99% 62-56-6
Thiourea, Reagent ACS, 99+% (Titr.) 62-56-6
Sebacoyl Chloride, Tech. 90-95% Active Chlorine 111-19-3
Quinaldine, 97% 91-63-4
Toluene, 99% 108-88-3
Toluene, Scintillation Grade 108-88-3
Tetrapropylammonium Chloride, 94% (Titr.) 5810-42-4
Toluene, Reagent ACS, Spectro Grade, 99.5% (GC) 108-88-3
Toluene, Reagent ACS 108-88-3
Toluene for HPLC 108-88-3
Himic anhydride, 99% 826-62-0
Tributyl Phosphate, 99% 126-73-8
Tributylamine, 99% 102-82-9
4-Picoline, 98% 108-89-4
Trichloroethylene, 99+% (Stabilized) 79-01-6
Titanium Rod 6.35mm Diam. 99.97% 7440-32-6
3-Amino-1H-1,2,4-triazole 61-82-5
Alizarin Complexone Dihydrate, Indicator Grade 3952-78-1
Phenylphosphate, disodium salt dihydrate, 98% 3279-54-7
Toluene-d8, 99+ atom % D 2037-26-5
Toluene-d8, packaged in 0.50 ml ampules, 100.0 atom % D 2037-26-5
Farnesol, mixture of isomers, 96% 4602-84-0
2,4-Dihydroxybenzaldehyde, 98% 95-01-2
tris-(Hydroxymethyl)-aminomethane, 99+% 77-86-1
Tris(hydroxymethyl)aminomethane, reagent acs 77-86-1
Hexyl alcohol 111-27-3
Sodium phosphate, tribasic dodecahydrate, p.a. 7601-54-9
4-Nitro-1,2-Phenylenediamine, 98% 99-56-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net