Search   
MSDS 
:
 2,4-Dihydroxybenzaldehyde, 98%
CAS 
:
 95-01-2
SYNONYMS 
:
 beta-Resorcylaldehyde
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 95-01-2 |2,4-Dihydroxybenzaldehyde, 98% | | 202-383-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 95-01-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white to cream
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 220.0 - 228.0 deg C @ 22.00mm
Freezing/Melting Point: 135.00 - 137.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: freely soluble in water
Specific Gravity/Density:
Molecular Formula: C7H6O3
Molecular Weight: 138.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Prolonged exposure
to moist air converts this substance to a brown amorphous powder
which is insoluble in ether.
Conditions to Avoid:
Moist air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 95-01-2: VH3600000
LD50/LC50:
CAS# 95-01-2: Oral, mouse: LD50 = 1380 mg/kg; Oral, rat: LD50 = 400
mg/kg.
Carcinogenicity:
2,4-Dihydroxybenzaldehyde, 98% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 95-01-2: 2
Canada
CAS# 95-01-2 is listed on Canada's NDSL List.
CAS# 95-01-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 95-01-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/19/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Hydroxyjulolidine 41175-50-2
(R)-2-Hydroxybutyl p-tosylate, 98+% 103745-07-9
TETRACHLOROETHYLENE DENSITY STANDARD 127-18-4
Tetrachloroethylene, 98% (GC) 127-18-4
Tetraethylammonium Bromide, 98% 71-91-0
Tetrahydrofuran, P.A., Stabilized with 0.025% BHT 109-99-9
Tetrahydrofuran, anhydrous, 99.9% Packaged under nitrogen. Stabilized 109-99-9
Tetrahydrofuran, 99.5+%, spectrophotometric grade 109-99-9
Unpreserved Tetrahydrofuran 109-99-9
Tetrahydroxy-P-Quinone Monohydrate, 99% (Titr.) 319-89-1
Ethyl L-Lactate,95% (GC) 687-47-8
N,N'-Dicyclohexylcarbodiimide, 99% 538-75-0
Tetramethylammonium hydroxide pentahydrate , 97% (48-52 wt% tma-oh) 10424-65-4
Tetramethylammonium hydroxide, 10% in water 75-59-2
Triphenyl phosphate 115-86-6
Benzamide, 99% 55-21-0
Thiosalicylic Acid, 98% 147-93-3
4-Iodobenzoic acid, 98% 619-58-9
Thiamine Hydrochloride, 98.5-101.5% (on the Anhydrous Substance) 67-03-8
Mercaptoacetic Acid, 98% 68-11-1
Mercaptoacetic acid 68-11-1
P-Anisidine, 99% 104-94-9
Thiourea, 99% 62-56-6
Thiourea, Reagent ACS, 99+% (Titr.) 62-56-6
Sebacoyl Chloride, Tech. 90-95% Active Chlorine 111-19-3
Quinaldine, 97% 91-63-4
Toluene, 99% 108-88-3
Toluene, Scintillation Grade 108-88-3
Tetrapropylammonium Chloride, 94% (Titr.) 5810-42-4
Toluene, Reagent ACS, Spectro Grade, 99.5% (GC) 108-88-3
Toluene, Reagent ACS 108-88-3
Toluene for HPLC 108-88-3
Himic anhydride, 99% 826-62-0
Tributyl Phosphate, 99% 126-73-8
Tributylamine, 99% 102-82-9
4-Picoline, 98% 108-89-4
Trichloroethylene, 99+% (Stabilized) 79-01-6
Titanium Rod 6.35mm Diam. 99.97% 7440-32-6
3-Amino-1H-1,2,4-triazole 61-82-5
Alizarin Complexone Dihydrate, Indicator Grade 3952-78-1
Phenylphosphate, disodium salt dihydrate, 98% 3279-54-7
Toluene-d8, 99+ atom % D 2037-26-5
Toluene-d8, packaged in 0.50 ml ampules, 100.0 atom % D 2037-26-5
Farnesol, mixture of isomers, 96% 4602-84-0
2,4-Dihydroxybenzaldehyde, 98% 95-01-2
tris-(Hydroxymethyl)-aminomethane, 99+% 77-86-1
Tris(hydroxymethyl)aminomethane, reagent acs 77-86-1
Hexyl alcohol 111-27-3
Sodium phosphate, tribasic dodecahydrate, p.a. 7601-54-9
4-Nitro-1,2-Phenylenediamine, 98% 99-56-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net