**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 111-19-3 |Sebacoyl Chloride | 90-95 | 203-843-4 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Lachrymator (substance
which increases the flow of tears).
Potential Health Effects
Eye:
Contact with liquid is corrosive to the eyes and causes severe
burns. Lachrymator (substance which increases the flow of tears).
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the
digestive tract. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Repeated
exposure may cause erosion of teeth.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Containers may explode if exposed to fire.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Keep container tightly closed. Do not get on skin
or in eyes. Do not ingest or inhale. Use with adequate ventilation.
Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-19-3:
CAS# 7732-18-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear brown
Odor: Not available.
pH: Not available.
Vapor Pressure: 12 mm Hg
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: -2.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Decomposed by water
Specific Gravity/Density: 1.12
Molecular Formula: ClCO(CH2)8COCl
Molecular Weight: 239.0168
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, bases, alcohols.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 111-19-3: HD8454250
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 111-19-3: Dermal, guinea pig: LD50 = 50 uL/kg; Draize test,
rabbit, eye: 45 uL Severe; Oral, mouse: LD50 = >1600 mg/kg; Oral,
rat: LD50 = 400 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Sebacoyl Chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111-19-3: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 111-19-3 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 111-19-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-19-3 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 5/06/1998 Revision #3 Date: 3/07/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
8-Hydroxyjulolidine
| 41175-50-2 |
|
(R)-2-Hydroxybutyl p-tosylate, 98+%
| 103745-07-9 |
|
TETRACHLOROETHYLENE DENSITY STANDARD
| 127-18-4 |
|
Tetrachloroethylene, 98% (GC)
| 127-18-4 |
|
Tetraethylammonium Bromide, 98%
| 71-91-0 |
|
Tetrahydrofuran, P.A., Stabilized with 0.025% BHT
| 109-99-9 |
|
Tetrahydrofuran, anhydrous, 99.9% Packaged under nitrogen. Stabilized
| 109-99-9 |
|
Tetrahydrofuran, 99.5+%, spectrophotometric grade
| 109-99-9 |
|
Unpreserved Tetrahydrofuran
| 109-99-9 |
|
Tetrahydroxy-P-Quinone Monohydrate, 99% (Titr.)
| 319-89-1 |
|
Ethyl L-Lactate,95% (GC)
| 687-47-8 |
|
N,N'-Dicyclohexylcarbodiimide, 99%
| 538-75-0 |
|
Tetramethylammonium hydroxide pentahydrate , 97% (48-52 wt% tma-oh)
| 10424-65-4 |
|
Tetramethylammonium hydroxide, 10% in water
| 75-59-2 |
|
Triphenyl phosphate
| 115-86-6 |
|
Benzamide, 99%
| 55-21-0 |
|
Thiosalicylic Acid, 98%
| 147-93-3 |
|
4-Iodobenzoic acid, 98%
| 619-58-9 |
|
Thiamine Hydrochloride, 98.5-101.5% (on the Anhydrous Substance)
| 67-03-8 |
|
Mercaptoacetic Acid, 98%
| 68-11-1 |
|
Mercaptoacetic acid
| 68-11-1 |
|
P-Anisidine, 99%
| 104-94-9 |
|
Thiourea, 99%
| 62-56-6 |
|
Thiourea, Reagent ACS, 99+% (Titr.)
| 62-56-6 |
|
Sebacoyl Chloride, Tech. 90-95% Active Chlorine
| 111-19-3 |
|
Quinaldine, 97%
| 91-63-4 |
|
Toluene, 99%
| 108-88-3 |
|
Toluene, Scintillation Grade
| 108-88-3 |
|
Tetrapropylammonium Chloride, 94% (Titr.)
| 5810-42-4 |
|
Toluene, Reagent ACS, Spectro Grade, 99.5% (GC)
| 108-88-3 |
|
Toluene, Reagent ACS
| 108-88-3 |
|
Toluene for HPLC
| 108-88-3 |
|
Himic anhydride, 99%
| 826-62-0 |
|
Tributyl Phosphate, 99%
| 126-73-8 |
|
Tributylamine, 99%
| 102-82-9 |
|
4-Picoline, 98%
| 108-89-4 |
|
Trichloroethylene, 99+% (Stabilized)
| 79-01-6 |
|
Titanium Rod 6.35mm Diam. 99.97%
| 7440-32-6 |
|
3-Amino-1H-1,2,4-triazole
| 61-82-5 |
|
Alizarin Complexone Dihydrate, Indicator Grade
| 3952-78-1 |
|
Phenylphosphate, disodium salt dihydrate, 98%
| 3279-54-7 |
|
Toluene-d8, 99+ atom % D
| 2037-26-5 |
|
Toluene-d8, packaged in 0.50 ml ampules, 100.0 atom % D
| 2037-26-5 |
|
Farnesol, mixture of isomers, 96%
| 4602-84-0 |
|
2,4-Dihydroxybenzaldehyde, 98%
| 95-01-2 |
|
tris-(Hydroxymethyl)-aminomethane, 99+%
| 77-86-1 |
|
Tris(hydroxymethyl)aminomethane, reagent acs
| 77-86-1 |
|
Hexyl alcohol
| 111-27-3 |
|
Sodium phosphate, tribasic dodecahydrate, p.a.
| 7601-54-9 |
|
4-Nitro-1,2-Phenylenediamine, 98%
| 99-56-9 |
|
|