Search   
MSDS 
:
 N,N,N'-Triethylethylenediamine, 99+%
CAS 
:
 105-04-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 105-04-4 |1,2-Ethanediamine, N,N,N'-Triethyl- | 99+ | 203-264-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Vapors may cause dizziness
or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Empty containers
retain product residue, (liquid and/or vapor), and can be dangerous.
Keep container tightly closed. Keep away from heat, sparks and
flame. Do not get on skin or in eyes. Do not ingest or inhale. Use
with adequate ventilation. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 105-04-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 54.0 - 55.0 deg C @ 13.00mm H
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 32 deg C ( 89.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8040g/cm3
Molecular Formula: C8H20N2
Molecular Weight: 144.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 105-04-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Ethanediamine, N,N,N'-Triethyl- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 105-04-4: No information available.
Canada
CAS# 105-04-4 is listed on Canada's NDSL List.
CAS# 105-04-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 105-04-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N,N'-Triethylethylenediamine, 99+% 105-04-4
Triethanolamine hydroiodide, 99% 7601-53-8
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate 51138-06-8
3-Octanone, 99% 106-68-3
4-Nitrochalcone, 99% 1222-98-6
Diphenyl-2-Pyridylmethane, 99+% 3678-70-4
3-Dimethylaminobenzoic Acid (Pract) 99-64-9
Ethyl 5-Nitroindole-2-Carboxylate, 95+% 16732-57-3
Fast red pdc salt 80-22-8
Copper(II) Chloride, Anhydrous, 98% 7447-39-4
4-Dimethylaminobenzoic acid, 98% 619-84-1
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+% 110-95-2
1-Butan(ol-d), 98+ atom % D 71-36-3
4-Heptanol, 99% (GC) 589-55-9
Thymolphthalein, Reagent ACS, 99% (UV-Vis) 125-20-2
Diphenyliodonium bromide 1483-73-4
Methyl formate-d, 98+ atom % d 23731-38-6
m-Nitrobenzoyl chloride 121-90-4
Acetaldehyde ammonia trimer, 98% 75-39-8
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99% 24286-13-3
3-Bromobenzoic Acid , 99% 585-76-2
N,N-Diethyl-p-phenylenediamine oxalate 62637-92-7
D-Gluconic Acid, Calcium Salt, 99% 299-28-5
Bis-Acrylamide 110-26-9
TEMED 110-18-9
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride 637-01-4
BDCS Silylation Reagent 68-12-2
Nalidixic Acid 389-08-2
1-Nitroso-2-naphthol, 98% 131-91-9
Samarium, 99.9%, -40 Mesh 7440-19-9
Benzine 71-43-2
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC) 6960-45-8
Naphthalene 91-20-3
Diphenylphosphoryl azide, 98% 26386-88-9
9,10-Dihydrophenanthrene, 95% 776-35-2
Ammonium Perrhenate(VII), 99.999% 13598-65-7
Methyl-2-Nitrobenzoate, 99% 606-27-9
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and 75-78-5
Beta-Bromophenetole, 98% 589-10-6
Tri-n-butyltin hydride, 97% 688-73-3
Ethylene/propylene/diene terpolymer, high molecular weight 25038-36-2
Tetraethylammonium iodide, 98% 68-05-3
(4-Pyridylmethylamino)-acetaldehyde diethylacetal 35822-55-0
Glutathione, Reduced , 98% 70-18-8
Alloxan, Monohydrate 2244-11-3
Nickel Metal 7440-02-0
2-Acetylfluorene, 98% 781-73-7
Nickel (II) Acetate Tetrahydrate 6018-89-9
Gallium(III) perchlorate hydrate, 99%
2-Nitrophenyl isocyanate, 99% (GC) 3220-86-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net