Search   
MSDS 
:
 Beta-Bromophenetole, 98%
CAS 
:
 589-10-6
SYNONYMS 
:
 2-Bromoethyl Phenyl Ether; ??-Bromophenylethyl Ether;     2-Phenoxyethylbromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 589-10-6 |Beta-Bromophenetole | 98% | 209-634-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible solid.
Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Use with adequate ventilation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 589-10-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 144 deg C @ 40.00mmHg
Freezing/Melting Point: 33.50 - 34.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 65 deg C ( 149.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H9BrO
Molecular Weight: 201.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 589-10-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Beta-Bromophenetole -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 589-10-6: No information available.
Canada
CAS# 589-10-6 is listed on Canada's NDSL List.
CAS# 589-10-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 589-10-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N,N'-Triethylethylenediamine, 99+% 105-04-4
Triethanolamine hydroiodide, 99% 7601-53-8
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate 51138-06-8
3-Octanone, 99% 106-68-3
4-Nitrochalcone, 99% 1222-98-6
Diphenyl-2-Pyridylmethane, 99+% 3678-70-4
3-Dimethylaminobenzoic Acid (Pract) 99-64-9
Ethyl 5-Nitroindole-2-Carboxylate, 95+% 16732-57-3
Fast red pdc salt 80-22-8
Copper(II) Chloride, Anhydrous, 98% 7447-39-4
4-Dimethylaminobenzoic acid, 98% 619-84-1
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+% 110-95-2
1-Butan(ol-d), 98+ atom % D 71-36-3
4-Heptanol, 99% (GC) 589-55-9
Thymolphthalein, Reagent ACS, 99% (UV-Vis) 125-20-2
Diphenyliodonium bromide 1483-73-4
Methyl formate-d, 98+ atom % d 23731-38-6
m-Nitrobenzoyl chloride 121-90-4
Acetaldehyde ammonia trimer, 98% 75-39-8
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99% 24286-13-3
3-Bromobenzoic Acid , 99% 585-76-2
N,N-Diethyl-p-phenylenediamine oxalate 62637-92-7
D-Gluconic Acid, Calcium Salt, 99% 299-28-5
Bis-Acrylamide 110-26-9
TEMED 110-18-9
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride 637-01-4
BDCS Silylation Reagent 68-12-2
Nalidixic Acid 389-08-2
1-Nitroso-2-naphthol, 98% 131-91-9
Samarium, 99.9%, -40 Mesh 7440-19-9
Benzine 71-43-2
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC) 6960-45-8
Naphthalene 91-20-3
Diphenylphosphoryl azide, 98% 26386-88-9
9,10-Dihydrophenanthrene, 95% 776-35-2
Ammonium Perrhenate(VII), 99.999% 13598-65-7
Methyl-2-Nitrobenzoate, 99% 606-27-9
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and 75-78-5
Beta-Bromophenetole, 98% 589-10-6
Tri-n-butyltin hydride, 97% 688-73-3
Ethylene/propylene/diene terpolymer, high molecular weight 25038-36-2
Tetraethylammonium iodide, 98% 68-05-3
(4-Pyridylmethylamino)-acetaldehyde diethylacetal 35822-55-0
Glutathione, Reduced , 98% 70-18-8
Alloxan, Monohydrate 2244-11-3
Nickel Metal 7440-02-0
2-Acetylfluorene, 98% 781-73-7
Nickel (II) Acetate Tetrahydrate 6018-89-9
Gallium(III) perchlorate hydrate, 99%
2-Nitrophenyl isocyanate, 99% (GC) 3220-86-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net