**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-02-0 |NICKEL | 100.0 | 231-111-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 40 43
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Limited evidence of a carcinogenic effect. May cause sensitization
by skin contact.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. May cause severe
irritation and possible burns. May cause dermatitis.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Inhalation of fumes may cause metal fume fever, which is
characterized by flu-like symptoms with metallic taste, fever,
chills, cough, weakness, chest pain, muscle pain and increased white
blood cell count. Inhalation of a mist of this material may cause
respiratory tract irritation. Breathing Nickel (Dust and Fume) can
cause a sore or hole in the "bone" (septum) dividing the inner nose.
Chronic:
Prolonged or repeated skin contact may cause sensitization
dermatitis and possible destruction and/or ulceration. May cause
respiratory tract cancer.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
There exists several chelation agents. The determination of there
use should be made only by qualified medical personnel.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Dust can be an explosion hazard when exposed to heat or flame.
Extinguishing Media:
Confining and smothering is preferable to applying water. DO NOT USE
WATER, CO2, OR FOAM DIRECTLY ON FIRE ITSELF. Use DRY sand, sodium
chloride powder, graphite powder, copper powder or Lith-X powder.
Dousing metallic fires with water may generate hydrogen gas, an
extremely dangerous explosion hazard, particularly if fire is in a
confined environment.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Very fine particles can cause a fire or explosion. Eliminate all
ignition sources. Reduce airborne dust and prevent scattering by
moistening with water. Sweep up, then place into a suitable
container for disposal. Carefully scoop up and place into
appropriate disposal container. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 7440-02-0:
United Kingdom, WEL - TWA: 0.5 mg/m3 TWA
United Kingdom, WEL - STEL: 1.5 mg/m3 STEL
United States OSHA: 1 mg/m3 TWA
Belgium - TWA: 1 mg/m3 VLE
France - VME: 1 mg/m3 VME; 1 mg/m3 VME (metal gratings)
Germany: 0.5 mg/m3 TWA (inhalable fraction)
Japan: 1 mg/m3 OEL
Malaysia: 1.5 mg/m3 TWA (inhalable fraction)
Netherlands: 1 mg/m3 MAC
Russia: 0.05 mg/m3 TWA
Spain: 1 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white to gray white
Odor: none reported
pH: Not available.
Vapor Pressure: 1 mm Hg @ 1810 C
Viscosity: Not applicable.
Boiling Point: 2730 deg C
Freezing/Melting Point: 1455 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 8.90
Molecular Formula: Ni
Molecular Weight: 58.69
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Acids, aluminum, ammonia, ammonium nitrate, bromine pentafluoride,
ethylene + aluminum, dioxane, fluorine, hydrazine, hydrazoic acid,
hydrogen, methanol, nitric acid, nitryl fluoride, organic solvents,
oxidants, phosphorus, potassium perchlorate, selenium, sulfur and
compounds.
Hazardous Decomposition Products:
Toxic and highly flammable nickel carbonyl.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7440-02-0: QR5950000 QR6126100 QR6555000 QR7120000
LD50/LC50:
Not available.
Carcinogenicity:
NICKEL -
California: carcinogen, initial date 10/1/89
NTP: Suspect carcinogen
IARC: Group 1 carcinogen (listed as Nickel compounds).
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
USA RQ: CAS# 7440-02-0: 100 lb final RQ (no reporting of releases of this hazard
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 40 Limited evidence of a carcinogenic effect.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 22 Do not breathe dust.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 7440-02-0: No information available.
Canada
CAS# 7440-02-0 is listed on Canada's DSL List.
CAS# 7440-02-0 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-02-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 3/19/1998 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
N,N,N'-Triethylethylenediamine, 99+%
| 105-04-4 |
|
Triethanolamine hydroiodide, 99%
| 7601-53-8 |
|
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate
| 51138-06-8 |
|
3-Octanone, 99%
| 106-68-3 |
|
4-Nitrochalcone, 99%
| 1222-98-6 |
|
Diphenyl-2-Pyridylmethane, 99+%
| 3678-70-4 |
|
3-Dimethylaminobenzoic Acid (Pract)
| 99-64-9 |
|
Ethyl 5-Nitroindole-2-Carboxylate, 95+%
| 16732-57-3 |
|
Fast red pdc salt
| 80-22-8 |
|
Copper(II) Chloride, Anhydrous, 98%
| 7447-39-4 |
|
4-Dimethylaminobenzoic acid, 98%
| 619-84-1 |
|
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+%
| 110-95-2 |
|
1-Butan(ol-d), 98+ atom % D
| 71-36-3 |
|
4-Heptanol, 99% (GC)
| 589-55-9 |
|
Thymolphthalein, Reagent ACS, 99% (UV-Vis)
| 125-20-2 |
|
Diphenyliodonium bromide
| 1483-73-4 |
|
Methyl formate-d, 98+ atom % d
| 23731-38-6 |
|
m-Nitrobenzoyl chloride
| 121-90-4 |
|
Acetaldehyde ammonia trimer, 98%
| 75-39-8 |
|
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99%
| 24286-13-3 |
|
3-Bromobenzoic Acid , 99%
| 585-76-2 |
|
N,N-Diethyl-p-phenylenediamine oxalate
| 62637-92-7 |
|
D-Gluconic Acid, Calcium Salt, 99%
| 299-28-5 |
|
Bis-Acrylamide
| 110-26-9 |
|
TEMED
| 110-18-9 |
|
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride
| 637-01-4 |
|
BDCS Silylation Reagent
| 68-12-2 |
|
Nalidixic Acid
| 389-08-2 |
|
1-Nitroso-2-naphthol, 98%
| 131-91-9 |
|
Samarium, 99.9%, -40 Mesh
| 7440-19-9 |
|
Benzine
| 71-43-2 |
|
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC)
| 6960-45-8 |
|
Naphthalene
| 91-20-3 |
|
Diphenylphosphoryl azide, 98%
| 26386-88-9 |
|
9,10-Dihydrophenanthrene, 95%
| 776-35-2 |
|
Ammonium Perrhenate(VII), 99.999%
| 13598-65-7 |
|
Methyl-2-Nitrobenzoate, 99%
| 606-27-9 |
|
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and
| 75-78-5 |
|
Beta-Bromophenetole, 98%
| 589-10-6 |
|
Tri-n-butyltin hydride, 97%
| 688-73-3 |
|
Ethylene/propylene/diene terpolymer, high molecular weight
| 25038-36-2 |
|
Tetraethylammonium iodide, 98%
| 68-05-3 |
|
(4-Pyridylmethylamino)-acetaldehyde diethylacetal
| 35822-55-0 |
|
Glutathione, Reduced , 98%
| 70-18-8 |
|
Alloxan, Monohydrate
| 2244-11-3 |
|
Nickel Metal
| 7440-02-0 |
|
2-Acetylfluorene, 98%
| 781-73-7 |
|
Nickel (II) Acetate Tetrahydrate
| 6018-89-9 |
|
Gallium(III) perchlorate hydrate, 99%
| |
|
2-Nitrophenyl isocyanate, 99% (GC)
| 3220-86-3 |
|
|