Search   
MSDS 
:
 N,N,N',N'-Tetramethyl-1,3-propanediamine,  99+%
CAS 
:
 110-95-2
SYNONYMS 
:
 1,3-Propanediamine, N,N,N',N'-tetramethyl-;     N,N,N',N'-Tetramethyl-1,3-diaminopropane;     N,N,N',N'-Tetramethyltrimethylenediamine; Propane-1,3-diamine,     N,N,N',N'-tetramethyl-; Tetramethyltrimethylenediamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-95-2 |N,N,N',N'-Tetramethyl-1,3-propanediami| 99+ | 203-818-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 10 22 24 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful if swallowed. Toxic in contact with skin. Causes
burns.Toxic.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Harmful if absorbed through the skin. May cause severe irritation
and possible burns. Substance is readily absorbed through the skin.
May cause cyanosis of the extremities.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. Ingestion of large amounts may cause
CNS depression.
Inhalation:
Exposure produces central nervous system depression. Inhalation may
be fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause burning
sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea, and vomiting. Harmful if inhaled.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do not use mouth-to-mouth resuscitation if victim
ingested or inhaled the substance; induce artificial respiration with
the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT use straight streams of water. In case of fire,
use carbon dioxide, dry chemical powder or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Cover with sand, dry lime or soda ash and place in
a closed container for disposal. Remove all sources of ignition. Use
a spark-proof tool. A vapor suppressing foam may be used to reduce
vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Ground and
bond containers when transferring material. Use spark-proof tools and
explosion proof equipment. Do not get in eyes, on skin, or on
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Do not ingest or inhale. Use and store under nitrogen. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Do not breathe vapor.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep containers tightly
closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 110-95-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 760 mm Hg @ 145 deg C
Viscosity: Not available.
Boiling Point: 145.0 - 146.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 31 deg C ( 87.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Miscible.
Specific Gravity/Density: 0.779
Molecular Formula: C7H18N2
Molecular Weight: 130.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Acid chlorides, acids, acid anhydrides, strong oxidizing agents,
carbon dioxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-95-2: TX8400000
LD50/LC50:
CAS# 110-95-2: Oral, rat: LD50 = 410 uL/kg; Skin, rabbit: LD50 = 300
uL/kg.
Inhalation, rat: LD50 = 375
Carcinogenicity:
N,N,N',N'-Tetramethyl-1,3-propanediamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2924
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3.3 (8)
UN Number: 2924
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2924
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 110-95-2: 2
Canada
CAS# 110-95-2 is listed on Canada's DSL List.
CAS# 110-95-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-95-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N,N'-Triethylethylenediamine, 99+% 105-04-4
Triethanolamine hydroiodide, 99% 7601-53-8
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate 51138-06-8
3-Octanone, 99% 106-68-3
4-Nitrochalcone, 99% 1222-98-6
Diphenyl-2-Pyridylmethane, 99+% 3678-70-4
3-Dimethylaminobenzoic Acid (Pract) 99-64-9
Ethyl 5-Nitroindole-2-Carboxylate, 95+% 16732-57-3
Fast red pdc salt 80-22-8
Copper(II) Chloride, Anhydrous, 98% 7447-39-4
4-Dimethylaminobenzoic acid, 98% 619-84-1
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+% 110-95-2
1-Butan(ol-d), 98+ atom % D 71-36-3
4-Heptanol, 99% (GC) 589-55-9
Thymolphthalein, Reagent ACS, 99% (UV-Vis) 125-20-2
Diphenyliodonium bromide 1483-73-4
Methyl formate-d, 98+ atom % d 23731-38-6
m-Nitrobenzoyl chloride 121-90-4
Acetaldehyde ammonia trimer, 98% 75-39-8
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99% 24286-13-3
3-Bromobenzoic Acid , 99% 585-76-2
N,N-Diethyl-p-phenylenediamine oxalate 62637-92-7
D-Gluconic Acid, Calcium Salt, 99% 299-28-5
Bis-Acrylamide 110-26-9
TEMED 110-18-9
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride 637-01-4
BDCS Silylation Reagent 68-12-2
Nalidixic Acid 389-08-2
1-Nitroso-2-naphthol, 98% 131-91-9
Samarium, 99.9%, -40 Mesh 7440-19-9
Benzine 71-43-2
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC) 6960-45-8
Naphthalene 91-20-3
Diphenylphosphoryl azide, 98% 26386-88-9
9,10-Dihydrophenanthrene, 95% 776-35-2
Ammonium Perrhenate(VII), 99.999% 13598-65-7
Methyl-2-Nitrobenzoate, 99% 606-27-9
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and 75-78-5
Beta-Bromophenetole, 98% 589-10-6
Tri-n-butyltin hydride, 97% 688-73-3
Ethylene/propylene/diene terpolymer, high molecular weight 25038-36-2
Tetraethylammonium iodide, 98% 68-05-3
(4-Pyridylmethylamino)-acetaldehyde diethylacetal 35822-55-0
Glutathione, Reduced , 98% 70-18-8
Alloxan, Monohydrate 2244-11-3
Nickel Metal 7440-02-0
2-Acetylfluorene, 98% 781-73-7
Nickel (II) Acetate Tetrahydrate 6018-89-9
Gallium(III) perchlorate hydrate, 99%
2-Nitrophenyl isocyanate, 99% (GC) 3220-86-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net