Search   
MSDS 
:
 N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride
CAS 
:
 637-01-4
SYNONYMS 
:
 N,N,N',N'-Tetramethyl-1,4-benzenediamine dihydrochloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 637-01-4 |N,N,N',N'-Tetramethyl-p-phenylenediami| >/= 96 | 211-274-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 637-01-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: beige
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 217-222 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C10H16N2.2HCl
Molecular Weight: 237.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 637-01-4 unlisted.
LD50/LC50:
Not available.
See RTECS ST4200000 on
N,N,N',N'-Tetramethyl-p-phenylenediamine.
mg/m3/10M (irritability & acute pulmonary edema).
mg/kg.
Carcinogenicity:
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 25 Avoid contact with eyes.
WGK (Water Danger/Protection)
CAS# 637-01-4: No information available.
Canada
CAS# 637-01-4 is listed on Canada's DSL List.
CAS# 637-01-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 637-01-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/12/1999 Revision #5 Date: 10/21/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N,N'-Triethylethylenediamine, 99+% 105-04-4
Triethanolamine hydroiodide, 99% 7601-53-8
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate 51138-06-8
3-Octanone, 99% 106-68-3
4-Nitrochalcone, 99% 1222-98-6
Diphenyl-2-Pyridylmethane, 99+% 3678-70-4
3-Dimethylaminobenzoic Acid (Pract) 99-64-9
Ethyl 5-Nitroindole-2-Carboxylate, 95+% 16732-57-3
Fast red pdc salt 80-22-8
Copper(II) Chloride, Anhydrous, 98% 7447-39-4
4-Dimethylaminobenzoic acid, 98% 619-84-1
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+% 110-95-2
1-Butan(ol-d), 98+ atom % D 71-36-3
4-Heptanol, 99% (GC) 589-55-9
Thymolphthalein, Reagent ACS, 99% (UV-Vis) 125-20-2
Diphenyliodonium bromide 1483-73-4
Methyl formate-d, 98+ atom % d 23731-38-6
m-Nitrobenzoyl chloride 121-90-4
Acetaldehyde ammonia trimer, 98% 75-39-8
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99% 24286-13-3
3-Bromobenzoic Acid , 99% 585-76-2
N,N-Diethyl-p-phenylenediamine oxalate 62637-92-7
D-Gluconic Acid, Calcium Salt, 99% 299-28-5
Bis-Acrylamide 110-26-9
TEMED 110-18-9
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride 637-01-4
BDCS Silylation Reagent 68-12-2
Nalidixic Acid 389-08-2
1-Nitroso-2-naphthol, 98% 131-91-9
Samarium, 99.9%, -40 Mesh 7440-19-9
Benzine 71-43-2
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC) 6960-45-8
Naphthalene 91-20-3
Diphenylphosphoryl azide, 98% 26386-88-9
9,10-Dihydrophenanthrene, 95% 776-35-2
Ammonium Perrhenate(VII), 99.999% 13598-65-7
Methyl-2-Nitrobenzoate, 99% 606-27-9
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and 75-78-5
Beta-Bromophenetole, 98% 589-10-6
Tri-n-butyltin hydride, 97% 688-73-3
Ethylene/propylene/diene terpolymer, high molecular weight 25038-36-2
Tetraethylammonium iodide, 98% 68-05-3
(4-Pyridylmethylamino)-acetaldehyde diethylacetal 35822-55-0
Glutathione, Reduced , 98% 70-18-8
Alloxan, Monohydrate 2244-11-3
Nickel Metal 7440-02-0
2-Acetylfluorene, 98% 781-73-7
Nickel (II) Acetate Tetrahydrate 6018-89-9
Gallium(III) perchlorate hydrate, 99%
2-Nitrophenyl isocyanate, 99% (GC) 3220-86-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net