**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 23731-38-6 |Methyl formate-d, 98+ atom % D | 98+ atom | 245-848-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F+
Risk Phrases: 12
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Extremely flammable.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation. May be absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation.
Chronic:
Causes narcosis in animals at high concentrations, and it is
expected that severe exposure will produce the same effect in humans.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Extremely flammable. Material will
readily ignite at room temperature. Use water spray to keep
fire-exposed containers cool. Water may be ineffective. Material is
lighter than water and a fire may be spread by the use of water.
Vapors may be heavier than air. They can spread along the ground
and collect in low or confined areas. Will be easily ignited by
heat, sparks or flame. Containers may explode if exposed to fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Water may be ineffective. Water may spread
fire. If water is the only media available, use in flooding amounts.
Use agent most appropriate to extinguish fire. For large fires, use
water spray, fog or alcohol-resistant foam. Do NOT use straight
streams of water. Cool containers with flooding quantities of water
until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Scoop up with a nonsparking tool, then place into
a suitable container for disposal. Cover with an activated carbon
adsorbent and place into a closed container for disposal. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Avoid ingestion and inhalation. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 23731-38-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Colorless Liquid
Odor: Pleasant Odor
pH: Not available.
Vapor Pressure: 9.34 psi @ 20 C
Viscosity: Not available.
Boiling Point: 32 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -3 deg C ( 26.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9900g/cm3
Molecular Formula: C2H3DO2
Molecular Weight: 61.06
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases, heat, moisture.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 23731-38-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl formate-d, 98+ atom % D -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: METHYL FORMATE
Hazard Class: 3
UN Number: 1243
Packing Group: I
IMO
Shipping Name: METHYL FORMATE
Hazard Class: 3.1
UN Number: 1243
Packing Group: I
RID/ADR
Shipping Name: METHYL FORMATE
Hazard Class: 3
UN Number: 1243
Packing group: I
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F+
Risk Phrases:
R 12 Extremely flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 23731-38-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 23731-38-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 23731-38-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 11/18/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
N,N,N'-Triethylethylenediamine, 99+%
| 105-04-4 |
|
Triethanolamine hydroiodide, 99%
| 7601-53-8 |
|
1-Methyl-5-mercaptotetrazole, sodium salt, dihydrate
| 51138-06-8 |
|
3-Octanone, 99%
| 106-68-3 |
|
4-Nitrochalcone, 99%
| 1222-98-6 |
|
Diphenyl-2-Pyridylmethane, 99+%
| 3678-70-4 |
|
3-Dimethylaminobenzoic Acid (Pract)
| 99-64-9 |
|
Ethyl 5-Nitroindole-2-Carboxylate, 95+%
| 16732-57-3 |
|
Fast red pdc salt
| 80-22-8 |
|
Copper(II) Chloride, Anhydrous, 98%
| 7447-39-4 |
|
4-Dimethylaminobenzoic acid, 98%
| 619-84-1 |
|
N,N,N',N'-Tetramethyl-1,3-propanediamine, 99+%
| 110-95-2 |
|
1-Butan(ol-d), 98+ atom % D
| 71-36-3 |
|
4-Heptanol, 99% (GC)
| 589-55-9 |
|
Thymolphthalein, Reagent ACS, 99% (UV-Vis)
| 125-20-2 |
|
Diphenyliodonium bromide
| 1483-73-4 |
|
Methyl formate-d, 98+ atom % d
| 23731-38-6 |
|
m-Nitrobenzoyl chloride
| 121-90-4 |
|
Acetaldehyde ammonia trimer, 98%
| 75-39-8 |
|
P-Amino-L-Phenylalanine Hydrochloride Hemihydrate, 99%
| 24286-13-3 |
|
3-Bromobenzoic Acid , 99%
| 585-76-2 |
|
N,N-Diethyl-p-phenylenediamine oxalate
| 62637-92-7 |
|
D-Gluconic Acid, Calcium Salt, 99%
| 299-28-5 |
|
Bis-Acrylamide
| 110-26-9 |
|
TEMED
| 110-18-9 |
|
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride
| 637-01-4 |
|
BDCS Silylation Reagent
| 68-12-2 |
|
Nalidixic Acid
| 389-08-2 |
|
1-Nitroso-2-naphthol, 98%
| 131-91-9 |
|
Samarium, 99.9%, -40 Mesh
| 7440-19-9 |
|
Benzine
| 71-43-2 |
|
7-Nitroindole-2-Carboxylic Acid, 90-95% (HPLC)
| 6960-45-8 |
|
Naphthalene
| 91-20-3 |
|
Diphenylphosphoryl azide, 98%
| 26386-88-9 |
|
9,10-Dihydrophenanthrene, 95%
| 776-35-2 |
|
Ammonium Perrhenate(VII), 99.999%
| 13598-65-7 |
|
Methyl-2-Nitrobenzoate, 99%
| 606-27-9 |
|
Mixture of dichlorodimethylsilane and silicon(iv)chloride (86 and
| 75-78-5 |
|
Beta-Bromophenetole, 98%
| 589-10-6 |
|
Tri-n-butyltin hydride, 97%
| 688-73-3 |
|
Ethylene/propylene/diene terpolymer, high molecular weight
| 25038-36-2 |
|
Tetraethylammonium iodide, 98%
| 68-05-3 |
|
(4-Pyridylmethylamino)-acetaldehyde diethylacetal
| 35822-55-0 |
|
Glutathione, Reduced , 98%
| 70-18-8 |
|
Alloxan, Monohydrate
| 2244-11-3 |
|
Nickel Metal
| 7440-02-0 |
|
2-Acetylfluorene, 98%
| 781-73-7 |
|
Nickel (II) Acetate Tetrahydrate
| 6018-89-9 |
|
Gallium(III) perchlorate hydrate, 99%
| |
|
2-Nitrophenyl isocyanate, 99% (GC)
| 3220-86-3 |
|
|