Search   
MSDS 
:
 N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer
CAS 
:
 134-62-3
SYNONYMS 
:
 DEET; N,N-Diethyl-3-methylbenzamide; Diethyltoluamide;     Diethyl-m-toluamide; 3-Methyl-N,N-diethylbenzamide; m-DETA; Off     insect repellent; Flypel.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 134-62-3 |N,N-Diethyl-m-toluamide | 98 | 205-149-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/38 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes and skin. Harmful to
aquatic organisms, may cause long-term adverse effects in the
aquatic environment.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed. May cause central nervous
system effects.
Inhalation:
May cause respiratory tract irritation. May cause irritation of the
mucous membranes.
Chronic:
Prolonged or repeated exposure may cause adverse reproductive
effects. Laboratory experiments have resulted in mutagenic effects.
Chronic overexposure may produce erythremia, bullous eruptions,
contact urticaria, muscle cramping, slurred speech, tremors,
seizures, or coma.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid. Do NOT use mouth-to-mouth resuscitation. Administer oxygen. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:
For ingestion, the stomach sould be intubated, aspirated, and
lavaged with a slurry of activated charcoal--protect the airway from
aspiration of gastric contents.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water may
be ineffective. Material is lighter than water and a fire may be
spread by the use of water.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes. Do not ingest or inhale. Wash clothing before reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 134-62-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: practically odorless
pH: Not available.
Vapor Pressure: < 0.01 mm Hg @ 25 C
Viscosity: cP 30 deg C
Boiling Point: 111 deg C @ 1 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 155 deg C ( 311.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: .9955 g/cm3
Molecular Formula: C12H17NO
Molecular Weight: 191.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Alkalis, strong oxidizing agents, strong bases, strong acids, strong
reducing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 134-62-3: XS3675000
LD50/LC50:
CAS# 134-62-3: Draize test, rabbit, eye: 100 mg; Draize test,
rabbit, eye: 10 mg Moderate; Draize test, rabbit, skin: 500 mg
Moderate; Inhalation, rat: LC50 = 5950 mg/m3; Oral, mouse: LD50 =
1170 mg/kg; Oral, rabbit: LD50 = 1584 mg/kg; Oral, rat: LD50 = 1892
mg/kg; Skin, rabbit: LD50 = 3180 uL/kg; Skin, rat: LD50 = 5 gm/kg.
Carcinogenicity:
N,N-Diethyl-m-toluamide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish toxicity: LC50 (96 hr) cichlid 120-150 ppm. After 96 hours,
glutathione levels in liver, kidney and gills were
raised.
Invertebrate toxicity: EC50 (5 min) Photobacterium
phosphoreum 67.9 ppm Microtox test.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/38 Irritating to eyes and skin.
R 52/53 Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 134-62-3: 1
Canada
CAS# 134-62-3 is listed on Canada's DSL List.
CAS# 134-62-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 134-62-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/26/1999 Revision #2 Date: 7/16/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin, Granular, 0.1-0.8mm, P.A. 7440-31-5
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm 7440-31-5
Tin, 20 Mesh, Reagent ACS (Granular) 7440-31-5
Tin, 30 Mesh, Reagent ACS (Granular) 7440-31-5
Tin (Shot), Reagent ACS, 99.5% (Titr.) 7440-31-5
1-Bromohexadecane, 97% 112-82-3
Anthraquinone, 97% 84-65-1
2-(1-Piperazinyl)Pyrimidine, 98+% 0-01-1
Indocyanine Green, 99% (uv-vis) 3599-32-4
Sodium Carbonate Decahydrate, P.A. 6132-02-1
3-Phenylpropionaldehyde, 90-95% 104-53-0
Cesium Bicarbonate, 99.9% 15519-28-5
Methyl Acetoacetate, 99+% 105-45-3
2-Methoxyethylamine 109-85-3
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+% 4149-06-8
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC) 79322-76-2
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC) 67-64-1
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC) 657-84-1
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10% 67-56-1
P-Methoxycinnamic Acid, 99%, Predominantly Trans 830-09-1
Tetramethylammonium Acetate, 50% Aqueous Solution 7732-18-5
Sulfuryl Chloride, 98.5% 7791-25-5
4-Nitrophenyl Isocyanate, 99% (GC) 100-28-7
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads 70024-51-0
Propionic anhydride, 97% 123-62-6
Propionic anhydride, 99% (gc) 123-62-6
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33 7732-18-5
Cellulose Acetate, Average M.W. 61000 9004-35-7
Cellulose acetate trimellitate 52907-01-4
4,4'-Methylenedianiline 101-77-9
Platinum, powder, 99.99% 7440-06-4
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone 111-71-7
Methyl Chloroacetate, 98% 96-34-4
Chloroacetone, 96% stabilized with 0.5% CaCO3 78-95-5
4-Methoxy-1-Naphthonitrile 5961-55-7
(+)-2,3-O-Isopropylidene-L-threitol, 99% 50622-09-8
3,3' -Diaminobenzidine tetrahydrochloride, 97% 7411-49-6
9(10H)-Acridone 578-95-0
Polyvinylpyrrolidone K15 (average m.w.10.000) 9003-39-8
Polyvinylpyrrolidone, K30 9003-39-8
Polyvinylpyrrolidone K12 9003-39-8
Polyvinylpyrrolidone 9003-39-8
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer 134-62-3
Sodium Bis-(Trimethylsilyl)-Amide, 98+ % 1070-89-9
Linolenic acid, tech. 90% (remainder lino leic acid) 463-40-1
o-Toluidine, 99% 95-53-4
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5) 26183-52-8
4-Oxo-4-Phenylamino-2-Butenoic Acid 37902-58-2
Cesium Sulfate, 99+% 10294-54-9
Bilirubin, 99% (uv) 635-65-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net