**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 96-34-4 |Methyl Chloroacetate | 98 | 202-501-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 10 23/25 37/38 41
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Toxic by inhalation and if swallowed. Irritating to
respiratory system and skin. Risk of serious damage to eyes.
Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears). May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin irritation. May cause irritation and dermatitis. May
cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. Can
produce delayed pulmonary edema. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Contact with metals may evolve
flammable hydrogen gas.
Extinguishing Media:
For large fires, use water spray, fog, or alcohol-resistant foam.
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT get water inside containers. Do NOT use straight
streams of water. For small fires, use carbon dioxide, dry chemical,
dry sand, or alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Use with adequate ventilation. Wash clothing before
reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 96-34-4:
Germany: 1 ppm TWA; 4.5 mg/m3 TWA
Germany: Skin absorber
Netherlands: 1 ppm MAC; 5 mg/m3 MAC
Russia: 5 mg/m3 TWA
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 6.5 mbar @ 20 C
Viscosity: Not available.
Boiling Point: 130 deg C @ 740.00mm Hg
Freezing/Melting Point: -33 deg C
Autoignition Temperature: 465 deg C ( 869.00 deg F)
Flash Point: 47 deg C ( 116.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 28 g/l water (20 c)
Specific Gravity/Density: 1.2380g/cm3
Molecular Formula: C3H5ClO2
Molecular Weight: 108.52
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic
fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 96-34-4: AF9500000
LD50/LC50:
CAS# 96-34-4: Inhalation, mouse: LC50 = 1 gm/m3/2H; Oral, mouse:
LD50 = 240 mg/kg.
Carcinogenicity:
Methyl Chloroacetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: METHYL CHLOROACETATE
Hazard Class: 6.1 (3)
UN Number: 2295
Packing Group:
IMO
Shipping Name: METHYL CHLOROACETATE
Hazard Class: 6.1 (3)
UN Number: 2295
Packing Group: I
RID/ADR
Shipping Name: METHYL CHLOROACETATE
Hazard Class: 6.1
UN Number: 2295
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 23/25 Toxic by inhalation and if swallowed.
R 37/38 Irritating to respiratory system and skin.
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 96-34-4: 2
Canada
CAS# 96-34-4 is listed on Canada's DSL List.
CAS# 96-34-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 96-34-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Tin, Granular, 0.1-0.8mm, P.A.
| 7440-31-5 |
|
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm
| 7440-31-5 |
|
Tin, 20 Mesh, Reagent ACS (Granular)
| 7440-31-5 |
|
Tin, 30 Mesh, Reagent ACS (Granular)
| 7440-31-5 |
|
Tin (Shot), Reagent ACS, 99.5% (Titr.)
| 7440-31-5 |
|
1-Bromohexadecane, 97%
| 112-82-3 |
|
Anthraquinone, 97%
| 84-65-1 |
|
2-(1-Piperazinyl)Pyrimidine, 98+%
| 0-01-1 |
|
Indocyanine Green, 99% (uv-vis)
| 3599-32-4 |
|
Sodium Carbonate Decahydrate, P.A.
| 6132-02-1 |
|
3-Phenylpropionaldehyde, 90-95%
| 104-53-0 |
|
Cesium Bicarbonate, 99.9%
| 15519-28-5 |
|
Methyl Acetoacetate, 99+%
| 105-45-3 |
|
2-Methoxyethylamine
| 109-85-3 |
|
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+%
| 4149-06-8 |
|
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC)
| 79322-76-2 |
|
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC)
| 67-64-1 |
|
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC)
| 657-84-1 |
|
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10%
| 67-56-1 |
|
P-Methoxycinnamic Acid, 99%, Predominantly Trans
| 830-09-1 |
|
Tetramethylammonium Acetate, 50% Aqueous Solution
| 7732-18-5 |
|
Sulfuryl Chloride, 98.5%
| 7791-25-5 |
|
4-Nitrophenyl Isocyanate, 99% (GC)
| 100-28-7 |
|
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads
| 70024-51-0 |
|
Propionic anhydride, 97%
| 123-62-6 |
|
Propionic anhydride, 99% (gc)
| 123-62-6 |
|
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33
| 7732-18-5 |
|
Cellulose Acetate, Average M.W. 61000
| 9004-35-7 |
|
Cellulose acetate trimellitate
| 52907-01-4 |
|
4,4'-Methylenedianiline
| 101-77-9 |
|
Platinum, powder, 99.99%
| 7440-06-4 |
|
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone
| 111-71-7 |
|
Methyl Chloroacetate, 98%
| 96-34-4 |
|
Chloroacetone, 96% stabilized with 0.5% CaCO3
| 78-95-5 |
|
4-Methoxy-1-Naphthonitrile
| 5961-55-7 |
|
(+)-2,3-O-Isopropylidene-L-threitol, 99%
| 50622-09-8 |
|
3,3' -Diaminobenzidine tetrahydrochloride, 97%
| 7411-49-6 |
|
9(10H)-Acridone
| 578-95-0 |
|
Polyvinylpyrrolidone K15 (average m.w.10.000)
| 9003-39-8 |
|
Polyvinylpyrrolidone, K30
| 9003-39-8 |
|
Polyvinylpyrrolidone K12
| 9003-39-8 |
|
Polyvinylpyrrolidone
| 9003-39-8 |
|
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer
| 134-62-3 |
|
Sodium Bis-(Trimethylsilyl)-Amide, 98+ %
| 1070-89-9 |
|
Linolenic acid, tech. 90% (remainder lino leic acid)
| 463-40-1 |
|
o-Toluidine, 99%
| 95-53-4 |
|
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5)
| 26183-52-8 |
|
4-Oxo-4-Phenylamino-2-Butenoic Acid
| 37902-58-2 |
|
Cesium Sulfate, 99+%
| 10294-54-9 |
|
Bilirubin, 99% (uv)
| 635-65-4 |
|
|