Search   
MSDS 
:
 Bilirubin, 99% (uv)
CAS 
:
 635-65-4
SYNONYMS 
:
 21H-Biline-8,12-dipropanoic acid,     2,17-diethenyl-1,10,19,22,23,24-hexahydro-3,7;Biline-8,12-dipropionic     acid, 1,10,19,22,23,24-hexahydro-2,7,13,17-tetramethyl-1; Hematoidin;     Hemetoidin; Principal bile pigment
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 635-65-4 |Bilirubin | 99 | 211-239-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water may
be ineffective. Material is lighter than water and a fire may be
spread by the use of water.
Extinguishing Media:
This material is lighter than water and insoluble in water. The fire
could easily be spread by the use of water in an area where the water
cannot be contained. In case of fire, use carbon dioxide, dry
chemical powder or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Store protected from light.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Deep freeze
(below -20C). Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 635-65-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: orange-brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 192 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: practically insoluble
Specific Gravity/Density: <1
Molecular Formula: C33H36N4O6
Molecular Weight: 584.67

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 635-65-4: DU3038000
LD50/LC50:
CAS# 635-65-4: Oral, mouse: LD50 = >15 gm/kg.
Carcinogenicity:
Bilirubin -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 635-65-4: 1
Canada
CAS# 635-65-4 is listed on Canada's DSL List.
CAS# 635-65-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 635-65-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin, Granular, 0.1-0.8mm, P.A. 7440-31-5
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm 7440-31-5
Tin, 20 Mesh, Reagent ACS (Granular) 7440-31-5
Tin, 30 Mesh, Reagent ACS (Granular) 7440-31-5
Tin (Shot), Reagent ACS, 99.5% (Titr.) 7440-31-5
1-Bromohexadecane, 97% 112-82-3
Anthraquinone, 97% 84-65-1
2-(1-Piperazinyl)Pyrimidine, 98+% 0-01-1
Indocyanine Green, 99% (uv-vis) 3599-32-4
Sodium Carbonate Decahydrate, P.A. 6132-02-1
3-Phenylpropionaldehyde, 90-95% 104-53-0
Cesium Bicarbonate, 99.9% 15519-28-5
Methyl Acetoacetate, 99+% 105-45-3
2-Methoxyethylamine 109-85-3
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+% 4149-06-8
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC) 79322-76-2
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC) 67-64-1
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC) 657-84-1
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10% 67-56-1
P-Methoxycinnamic Acid, 99%, Predominantly Trans 830-09-1
Tetramethylammonium Acetate, 50% Aqueous Solution 7732-18-5
Sulfuryl Chloride, 98.5% 7791-25-5
4-Nitrophenyl Isocyanate, 99% (GC) 100-28-7
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads 70024-51-0
Propionic anhydride, 97% 123-62-6
Propionic anhydride, 99% (gc) 123-62-6
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33 7732-18-5
Cellulose Acetate, Average M.W. 61000 9004-35-7
Cellulose acetate trimellitate 52907-01-4
4,4'-Methylenedianiline 101-77-9
Platinum, powder, 99.99% 7440-06-4
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone 111-71-7
Methyl Chloroacetate, 98% 96-34-4
Chloroacetone, 96% stabilized with 0.5% CaCO3 78-95-5
4-Methoxy-1-Naphthonitrile 5961-55-7
(+)-2,3-O-Isopropylidene-L-threitol, 99% 50622-09-8
3,3' -Diaminobenzidine tetrahydrochloride, 97% 7411-49-6
9(10H)-Acridone 578-95-0
Polyvinylpyrrolidone K15 (average m.w.10.000) 9003-39-8
Polyvinylpyrrolidone, K30 9003-39-8
Polyvinylpyrrolidone K12 9003-39-8
Polyvinylpyrrolidone 9003-39-8
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer 134-62-3
Sodium Bis-(Trimethylsilyl)-Amide, 98+ % 1070-89-9
Linolenic acid, tech. 90% (remainder lino leic acid) 463-40-1
o-Toluidine, 99% 95-53-4
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5) 26183-52-8
4-Oxo-4-Phenylamino-2-Butenoic Acid 37902-58-2
Cesium Sulfate, 99+% 10294-54-9
Bilirubin, 99% (uv) 635-65-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net