Search   
MSDS 
:
 Tetramethylammonium Acetate, 50% Aqueous Solution
CAS 
:
 7732-18-5
SYNONYMS 
:
 N,N,N-Trimethyl-Methanaminium Acetate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | 50 | 231-791-2 |
|----------------|--------------------------------------|----------|-----------|
| 10581-12-1 |Methanaminium, N,N,N-Trimethyl-, Aceta| 50 | 234-179-3 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Containers may explode
when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Cool containers with flooding quantities of water
until well after fire is out. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Do not allow contact with water. Keep from
contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7732-18-5:

CAS# 10581-12-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear water white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H15NO2
Molecular Weight: 133.1105

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7732-18-5: ZC0110000
CAS# 10581-12-1 unlisted.
LD50/LC50:
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 10581-12-1.
Carcinogenicity:
Water -
Not listed by ACGIH, IARC, or NTP.
Methanaminium, N,N,N-Trimethyl-, Acetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7732-18-5: No information available.
CAS# 10581-12-1: No information available.
Canada
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 10581-12-1 is listed on Canada's NDSL List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 10581-12-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 10581-12-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 1/29/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin, Granular, 0.1-0.8mm, P.A. 7440-31-5
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm 7440-31-5
Tin, 20 Mesh, Reagent ACS (Granular) 7440-31-5
Tin, 30 Mesh, Reagent ACS (Granular) 7440-31-5
Tin (Shot), Reagent ACS, 99.5% (Titr.) 7440-31-5
1-Bromohexadecane, 97% 112-82-3
Anthraquinone, 97% 84-65-1
2-(1-Piperazinyl)Pyrimidine, 98+% 0-01-1
Indocyanine Green, 99% (uv-vis) 3599-32-4
Sodium Carbonate Decahydrate, P.A. 6132-02-1
3-Phenylpropionaldehyde, 90-95% 104-53-0
Cesium Bicarbonate, 99.9% 15519-28-5
Methyl Acetoacetate, 99+% 105-45-3
2-Methoxyethylamine 109-85-3
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+% 4149-06-8
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC) 79322-76-2
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC) 67-64-1
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC) 657-84-1
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10% 67-56-1
P-Methoxycinnamic Acid, 99%, Predominantly Trans 830-09-1
Tetramethylammonium Acetate, 50% Aqueous Solution 7732-18-5
Sulfuryl Chloride, 98.5% 7791-25-5
4-Nitrophenyl Isocyanate, 99% (GC) 100-28-7
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads 70024-51-0
Propionic anhydride, 97% 123-62-6
Propionic anhydride, 99% (gc) 123-62-6
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33 7732-18-5
Cellulose Acetate, Average M.W. 61000 9004-35-7
Cellulose acetate trimellitate 52907-01-4
4,4'-Methylenedianiline 101-77-9
Platinum, powder, 99.99% 7440-06-4
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone 111-71-7
Methyl Chloroacetate, 98% 96-34-4
Chloroacetone, 96% stabilized with 0.5% CaCO3 78-95-5
4-Methoxy-1-Naphthonitrile 5961-55-7
(+)-2,3-O-Isopropylidene-L-threitol, 99% 50622-09-8
3,3' -Diaminobenzidine tetrahydrochloride, 97% 7411-49-6
9(10H)-Acridone 578-95-0
Polyvinylpyrrolidone K15 (average m.w.10.000) 9003-39-8
Polyvinylpyrrolidone, K30 9003-39-8
Polyvinylpyrrolidone K12 9003-39-8
Polyvinylpyrrolidone 9003-39-8
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer 134-62-3
Sodium Bis-(Trimethylsilyl)-Amide, 98+ % 1070-89-9
Linolenic acid, tech. 90% (remainder lino leic acid) 463-40-1
o-Toluidine, 99% 95-53-4
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5) 26183-52-8
4-Oxo-4-Phenylamino-2-Butenoic Acid 37902-58-2
Cesium Sulfate, 99+% 10294-54-9
Bilirubin, 99% (uv) 635-65-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net