**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 657-84-1 |P-Toluenesulfonic Acid, Sodium Salt | 99 | 211-522-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 657-84-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 500 deg C (> 932.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density:
Molecular Formula: C7H7NaO3S
Molecular Weight: 194.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 657-84-1: XT7350000
LD50/LC50:
Not available.
Carcinogenicity:
P-Toluenesulfonic Acid, Sodium Salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 657-84-1: 1
Canada
CAS# 657-84-1 is listed on Canada's DSL List.
CAS# 657-84-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 657-84-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/15/1998 Revision #3 Date: 3/04/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Tin, Granular, 0.1-0.8mm, P.A.
| 7440-31-5 |
|
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm
| 7440-31-5 |
|
Tin, 20 Mesh, Reagent ACS (Granular)
| 7440-31-5 |
|
Tin, 30 Mesh, Reagent ACS (Granular)
| 7440-31-5 |
|
Tin (Shot), Reagent ACS, 99.5% (Titr.)
| 7440-31-5 |
|
1-Bromohexadecane, 97%
| 112-82-3 |
|
Anthraquinone, 97%
| 84-65-1 |
|
2-(1-Piperazinyl)Pyrimidine, 98+%
| 0-01-1 |
|
Indocyanine Green, 99% (uv-vis)
| 3599-32-4 |
|
Sodium Carbonate Decahydrate, P.A.
| 6132-02-1 |
|
3-Phenylpropionaldehyde, 90-95%
| 104-53-0 |
|
Cesium Bicarbonate, 99.9%
| 15519-28-5 |
|
Methyl Acetoacetate, 99+%
| 105-45-3 |
|
2-Methoxyethylamine
| 109-85-3 |
|
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+%
| 4149-06-8 |
|
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC)
| 79322-76-2 |
|
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC)
| 67-64-1 |
|
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC)
| 657-84-1 |
|
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10%
| 67-56-1 |
|
P-Methoxycinnamic Acid, 99%, Predominantly Trans
| 830-09-1 |
|
Tetramethylammonium Acetate, 50% Aqueous Solution
| 7732-18-5 |
|
Sulfuryl Chloride, 98.5%
| 7791-25-5 |
|
4-Nitrophenyl Isocyanate, 99% (GC)
| 100-28-7 |
|
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads
| 70024-51-0 |
|
Propionic anhydride, 97%
| 123-62-6 |
|
Propionic anhydride, 99% (gc)
| 123-62-6 |
|
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33
| 7732-18-5 |
|
Cellulose Acetate, Average M.W. 61000
| 9004-35-7 |
|
Cellulose acetate trimellitate
| 52907-01-4 |
|
4,4'-Methylenedianiline
| 101-77-9 |
|
Platinum, powder, 99.99%
| 7440-06-4 |
|
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone
| 111-71-7 |
|
Methyl Chloroacetate, 98%
| 96-34-4 |
|
Chloroacetone, 96% stabilized with 0.5% CaCO3
| 78-95-5 |
|
4-Methoxy-1-Naphthonitrile
| 5961-55-7 |
|
(+)-2,3-O-Isopropylidene-L-threitol, 99%
| 50622-09-8 |
|
3,3' -Diaminobenzidine tetrahydrochloride, 97%
| 7411-49-6 |
|
9(10H)-Acridone
| 578-95-0 |
|
Polyvinylpyrrolidone K15 (average m.w.10.000)
| 9003-39-8 |
|
Polyvinylpyrrolidone, K30
| 9003-39-8 |
|
Polyvinylpyrrolidone K12
| 9003-39-8 |
|
Polyvinylpyrrolidone
| 9003-39-8 |
|
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer
| 134-62-3 |
|
Sodium Bis-(Trimethylsilyl)-Amide, 98+ %
| 1070-89-9 |
|
Linolenic acid, tech. 90% (remainder lino leic acid)
| 463-40-1 |
|
o-Toluidine, 99%
| 95-53-4 |
|
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5)
| 26183-52-8 |
|
4-Oxo-4-Phenylamino-2-Butenoic Acid
| 37902-58-2 |
|
Cesium Sulfate, 99+%
| 10294-54-9 |
|
Bilirubin, 99% (uv)
| 635-65-4 |
|
|