Search   
MSDS 
:
 Linolenic acid, tech. 90% (remainder lino leic acid)
CAS 
:
 463-40-1
SYNONYMS 
:
 9,12,15-Octadecatrienoic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 463-40-1 |LINOLENIC ACID | 90% | 207-334-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 463-40-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear slight beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 230 - 232 deg C @ 1.00mm Hg
Freezing/Melting Point: -11 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .9140g/cm3
Molecular Formula: C18H30O2
Molecular Weight: 278.42

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Bases - oxidizing agents - reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 463-40-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
LINOLENIC ACID -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 463-40-1: No information available.
Canada
CAS# 463-40-1 is listed on Canada's DSL List.
CAS# 463-40-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 463-40-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin, Granular, 0.1-0.8mm, P.A. 7440-31-5
Tin, 97.5%, foil 0.0125 mm thickness, 300 x 300mm 7440-31-5
Tin, 20 Mesh, Reagent ACS (Granular) 7440-31-5
Tin, 30 Mesh, Reagent ACS (Granular) 7440-31-5
Tin (Shot), Reagent ACS, 99.5% (Titr.) 7440-31-5
1-Bromohexadecane, 97% 112-82-3
Anthraquinone, 97% 84-65-1
2-(1-Piperazinyl)Pyrimidine, 98+% 0-01-1
Indocyanine Green, 99% (uv-vis) 3599-32-4
Sodium Carbonate Decahydrate, P.A. 6132-02-1
3-Phenylpropionaldehyde, 90-95% 104-53-0
Cesium Bicarbonate, 99.9% 15519-28-5
Methyl Acetoacetate, 99+% 105-45-3
2-Methoxyethylamine 109-85-3
3-Amino-1-Phenyl-2-Pyrazolin-5-One, 99+% 4149-06-8
Methyl 4-(1-Hydroxyethyl)Benzoate, Tech., 90% (GC) 79322-76-2
2,2,6-Trimethyl-4H-1,3-dioxin-4-one, 90-95% (GC) 67-64-1
P-Toluenesulfonic Acid,Sodium Salt, 99% (TLC) 657-84-1
Hexadecyltrimethylammonium hydroxide titrant (0.5M in water with 10% 67-56-1
P-Methoxycinnamic Acid, 99%, Predominantly Trans 830-09-1
Tetramethylammonium Acetate, 50% Aqueous Solution 7732-18-5
Sulfuryl Chloride, 98.5% 7791-25-5
4-Nitrophenyl Isocyanate, 99% (GC) 100-28-7
Chloromethylated polystyrene: 2% divinylbenzene copolymer beads 70024-51-0
Propionic anhydride, 97% 123-62-6
Propionic anhydride, 99% (gc) 123-62-6
Benzalkonium chloride, alkyl distribution from C8H17 to C16H33 7732-18-5
Cellulose Acetate, Average M.W. 61000 9004-35-7
Cellulose acetate trimellitate 52907-01-4
4,4'-Methylenedianiline 101-77-9
Platinum, powder, 99.99% 7440-06-4
Heptaldehyde, 95%, stabilized with 100 ppm hydroquinone 111-71-7
Methyl Chloroacetate, 98% 96-34-4
Chloroacetone, 96% stabilized with 0.5% CaCO3 78-95-5
4-Methoxy-1-Naphthonitrile 5961-55-7
(+)-2,3-O-Isopropylidene-L-threitol, 99% 50622-09-8
3,3' -Diaminobenzidine tetrahydrochloride, 97% 7411-49-6
9(10H)-Acridone 578-95-0
Polyvinylpyrrolidone K15 (average m.w.10.000) 9003-39-8
Polyvinylpyrrolidone, K30 9003-39-8
Polyvinylpyrrolidone K12 9003-39-8
Polyvinylpyrrolidone 9003-39-8
N,N-Diethyl-m-toluamide, 98%, min. 95% meta-isomer 134-62-3
Sodium Bis-(Trimethylsilyl)-Amide, 98+ % 1070-89-9
Linolenic acid, tech. 90% (remainder lino leic acid) 463-40-1
o-Toluidine, 99% 95-53-4
Polyethyleneglycol 300 Monodecylether (Fractionated, Fraction 5) 26183-52-8
4-Oxo-4-Phenylamino-2-Butenoic Acid 37902-58-2
Cesium Sulfate, 99+% 10294-54-9
Bilirubin, 99% (uv) 635-65-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net