**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1871-67-6 |2-Octenoic acid | 90-95 | 217-491-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause systemic effects. May cause
burning sensation, coughing, wheezing, laryngitis, shortness of
breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do not use mouth-to-mouth
resuscitation if victim ingested or inhaled the substance; induce
artificial respiration with the aid of a pocket mask equipped with a
one-way valve or other proper respiratory medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Water may be ineffective. Use water spray, dry chemical, carbon
dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Do not ingest or inhale. Use only in a chemical
fume hood. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Keep under a nitrogen blanket.
Corrosives area. Store in a cool, dry area away from incompatible
substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1871-67-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: colorless - light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 154 deg C @ 22.00mm
Freezing/Melting Point: 5 - 6 deg C
Autoignition Temperature: Not applicable.
Flash Point: 140 deg C ( 284.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: .9440g/cm3
Molecular Formula: CH3(CH2)4CH=CHCO2H
Molecular Weight: 142.20
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Bases, oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1871-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Octenoic acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1871-67-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1871-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1871-67-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Methyl-2-pyrrolidinone, 99+%, spectrophotometric grade
| 872-50-4 |
|
1-Methyl-2-pyrrolidinone, 99%
| 872-50-4 |
|
Sodium Iodide, 99.999%
| 7681-82-5 |
|
Guanidine Hydrochloride, 99% (Contains 0.2-0.4% SiO2 as Anti-Caking
| 50-01-1 |
|
Guanidine Hydrochloride, 98%
| 50-01-1 |
|
Phenoxy resin, average m.w. 70000
| 26402-79-9 |
|
N,N-Dimethylbenzylamine, 98%
| 103-83-3 |
|
N,N-Dimethylformamide, 99%
| 68-12-2 |
|
2-Methylbutane, 99+%
| 78-78-4 |
|
2-Methylbutane, 99+%, spectrophotometric grade
| 78-78-4 |
|
N,N-Dimethylformamide, P.A.
| 68-12-2 |
|
Polyethyleneglycol 300 Monononylether (Fractionated, Fraction 5)
| 39587-22-9 |
|
Polyethyleneglycol 300 Monooctylether
| 27252-75-1 |
|
Polyethyleneglycol 300 Monooctylether (Fractionated, Fraction 2)
| 27252-75-1 |
|
6-Ketocholestanol, 99%
| 1175-06-0 |
|
Polyethyleneglycol 300 monooctylether (Fractionated, Fraction 5)
| 27252-75-1 |
|
Dicyandiamide, 99.5%
| 461-58-5 |
|
Nitrazine Yellow, Indicator Grade
| 5423-07-4 |
|
Polyethyleneglycol 400 Monooctylether
| 27252-75-1 |
|
Polyethyleneglycol 600 Monooctylether
| 27252-75-1 |
|
N,N-Dimethylformamide for HPLC
| 68-12-2 |
|
N,N-Dimethylformamide, Reagent ACS
| 68-12-2 |
|
N,N-Dimethylformamide, Nonaqueous Titration Grade, 99+% (GC)
| 68-12-2 |
|
2-Isonitrosoacetophenone, 99%
| 532-54-7 |
|
N,N-Dimethylformamide, Reagent ACS, Spectro Grade, 99.8% (GC)
| 68-12-2 |
|
N,N-Dimethylformamide, 99+% Spectrophotometric Grade
| 68-12-2 |
|
R(+)-alpha-methylbenzyl isocyanate, 95%
| 33375-06-3 |
|
s-(-)-1-Phenylethylamine, 98% (uv-vis)
| 2627-86-3 |
|
r-(+)-1-Phenylethylamine, 98% (uv-vis)
| 3886-69-9 |
|
1,4-Dichlorobutane, 99+%
| 110-56-5 |
|
(-)-Taddol, 98%, (99% e.e.)
| 93379-48-7 |
|
3-Methyltetrahydrofuran, 99%
| 13423-15-9 |
|
Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400
| 9036-15-1 |
|
Cyclohexanone, 99.8%
| 108-94-1 |
|
1-Bromo-3-chloropropane, p.a.
| 109-70-6 |
|
2-Octenoic acid, 90-95% trans
| 1871-67-6 |
|
Fluorene (Techn), 90% (UV-Vis)
| 86-73-7 |
|
Chrysene, 98%
| 218-01-9 |
|
Aluminum chloride hexahydrate, 99%
| 7784-13-6 |
|
Carmine certified alum lake
| 1390-65-4 |
|
Carmine, high purity biological stain, (alum lake of carminic
| 1390-65-4 |
|
Trichlorovinylsilane, 96%
| 75-94-5 |
|
p-Xylene, 99%
| 106-42-3 |
|
p-Xylene, scintillation grade, 99%
| 106-42-3 |
|
Cyclooctanemethanol, 97%
| 3637-63-6 |
|
m-Xylene, spectro grade
| 108-38-3 |
|
2,3,3-Trichlorotetrahydrofuran, 98%
| 0-00-1 |
|
4-Chloro-1-(2,5-Dimethylphenyl)-1-Butanone
| 71526-84-6 |
|
4-Chloro-1-(2,4-Dimethylphenyl)-1-Butanone
| 74298-65-0 |
|
Fast Green FCF, High Purity Biological Stain
| 2353-45-9 |
|
|