Search   
MSDS 
:
 Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400
CAS 
:
 9036-15-1
SYNONYMS 
:
 Chloromethylated styrene/divinylbenzene copolymer
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9036-15-1 |Merrifield's peptide resin, 2% cross-l| | unlisted |
| |inked, 2-2.5 meq Cl/g, 200-400 mesh | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a tightly closed container. Store in a dry area. Deep
freeze (below -20C).

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 9036-15-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9036-15-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Merrifield's peptide resin, 2% cross-linked, 2-2.5 meq Cl/g, 200-400
mesh -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 9036-15-1: No information available.
Canada
CAS# 9036-15-1 is listed on Canada's DSL List.
CAS# 9036-15-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9036-15-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methyl-2-pyrrolidinone, 99+%, spectrophotometric grade 872-50-4
1-Methyl-2-pyrrolidinone, 99% 872-50-4
Sodium Iodide, 99.999% 7681-82-5
Guanidine Hydrochloride, 99% (Contains 0.2-0.4% SiO2 as Anti-Caking 50-01-1
Guanidine Hydrochloride, 98% 50-01-1
Phenoxy resin, average m.w. 70000 26402-79-9
N,N-Dimethylbenzylamine, 98% 103-83-3
N,N-Dimethylformamide, 99% 68-12-2
2-Methylbutane, 99+% 78-78-4
2-Methylbutane, 99+%, spectrophotometric grade 78-78-4
N,N-Dimethylformamide, P.A. 68-12-2
Polyethyleneglycol 300 Monononylether (Fractionated, Fraction 5) 39587-22-9
Polyethyleneglycol 300 Monooctylether 27252-75-1
Polyethyleneglycol 300 Monooctylether (Fractionated, Fraction 2) 27252-75-1
6-Ketocholestanol, 99% 1175-06-0
Polyethyleneglycol 300 monooctylether (Fractionated, Fraction 5) 27252-75-1
Dicyandiamide, 99.5% 461-58-5
Nitrazine Yellow, Indicator Grade 5423-07-4
Polyethyleneglycol 400 Monooctylether 27252-75-1
Polyethyleneglycol 600 Monooctylether 27252-75-1
N,N-Dimethylformamide for HPLC 68-12-2
N,N-Dimethylformamide, Reagent ACS 68-12-2
N,N-Dimethylformamide, Nonaqueous Titration Grade, 99+% (GC) 68-12-2
2-Isonitrosoacetophenone, 99% 532-54-7
N,N-Dimethylformamide, Reagent ACS, Spectro Grade, 99.8% (GC) 68-12-2
N,N-Dimethylformamide, 99+% Spectrophotometric Grade 68-12-2
R(+)-alpha-methylbenzyl isocyanate, 95% 33375-06-3
s-(-)-1-Phenylethylamine, 98% (uv-vis) 2627-86-3
r-(+)-1-Phenylethylamine, 98% (uv-vis) 3886-69-9
1,4-Dichlorobutane, 99+% 110-56-5
(-)-Taddol, 98%, (99% e.e.) 93379-48-7
3-Methyltetrahydrofuran, 99% 13423-15-9
Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400 9036-15-1
Cyclohexanone, 99.8% 108-94-1
1-Bromo-3-chloropropane, p.a. 109-70-6
2-Octenoic acid, 90-95% trans 1871-67-6
Fluorene (Techn), 90% (UV-Vis) 86-73-7
Chrysene, 98% 218-01-9
Aluminum chloride hexahydrate, 99% 7784-13-6
Carmine certified alum lake 1390-65-4
Carmine, high purity biological stain, (alum lake of carminic 1390-65-4
Trichlorovinylsilane, 96% 75-94-5
p-Xylene, 99% 106-42-3
p-Xylene, scintillation grade, 99% 106-42-3
Cyclooctanemethanol, 97% 3637-63-6
m-Xylene, spectro grade 108-38-3
2,3,3-Trichlorotetrahydrofuran, 98% 0-00-1
4-Chloro-1-(2,5-Dimethylphenyl)-1-Butanone 71526-84-6
4-Chloro-1-(2,4-Dimethylphenyl)-1-Butanone 74298-65-0
Fast Green FCF, High Purity Biological Stain 2353-45-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net