Search   
MSDS 
:
 2-Isonitrosoacetophenone, 99%
CAS 
:
 532-54-7
SYNONYMS 
:
 2-Hydroxyiminoacetophenone; Acetophenone, 2-hydroxyimino-;     Benzeneacetaldehyde, alpha-oxo-, aldoxime; Glyoxal, 1-phenyl-,     2-oxime; Isonitrosoacetophenone
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 532-54-7 |2-Isonitrosoacetophenone | 99 | 208-539-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 532-54-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: beige to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 126.00 - 128.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: soluble in hot water
Specific Gravity/Density: Not available.
Molecular Formula: C8H7NO2
Molecular Weight: 149.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 532-54-7: MD3325000
LD50/LC50:
Not available.
Carcinogenicity:
2-Isonitrosoacetophenone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 532-54-7: 2
Canada
CAS# 532-54-7 is listed on Canada's NDSL List.
CAS# 532-54-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 532-54-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methyl-2-pyrrolidinone, 99+%, spectrophotometric grade 872-50-4
1-Methyl-2-pyrrolidinone, 99% 872-50-4
Sodium Iodide, 99.999% 7681-82-5
Guanidine Hydrochloride, 99% (Contains 0.2-0.4% SiO2 as Anti-Caking 50-01-1
Guanidine Hydrochloride, 98% 50-01-1
Phenoxy resin, average m.w. 70000 26402-79-9
N,N-Dimethylbenzylamine, 98% 103-83-3
N,N-Dimethylformamide, 99% 68-12-2
2-Methylbutane, 99+% 78-78-4
2-Methylbutane, 99+%, spectrophotometric grade 78-78-4
N,N-Dimethylformamide, P.A. 68-12-2
Polyethyleneglycol 300 Monononylether (Fractionated, Fraction 5) 39587-22-9
Polyethyleneglycol 300 Monooctylether 27252-75-1
Polyethyleneglycol 300 Monooctylether (Fractionated, Fraction 2) 27252-75-1
6-Ketocholestanol, 99% 1175-06-0
Polyethyleneglycol 300 monooctylether (Fractionated, Fraction 5) 27252-75-1
Dicyandiamide, 99.5% 461-58-5
Nitrazine Yellow, Indicator Grade 5423-07-4
Polyethyleneglycol 400 Monooctylether 27252-75-1
Polyethyleneglycol 600 Monooctylether 27252-75-1
N,N-Dimethylformamide for HPLC 68-12-2
N,N-Dimethylformamide, Reagent ACS 68-12-2
N,N-Dimethylformamide, Nonaqueous Titration Grade, 99+% (GC) 68-12-2
2-Isonitrosoacetophenone, 99% 532-54-7
N,N-Dimethylformamide, Reagent ACS, Spectro Grade, 99.8% (GC) 68-12-2
N,N-Dimethylformamide, 99+% Spectrophotometric Grade 68-12-2
R(+)-alpha-methylbenzyl isocyanate, 95% 33375-06-3
s-(-)-1-Phenylethylamine, 98% (uv-vis) 2627-86-3
r-(+)-1-Phenylethylamine, 98% (uv-vis) 3886-69-9
1,4-Dichlorobutane, 99+% 110-56-5
(-)-Taddol, 98%, (99% e.e.) 93379-48-7
3-Methyltetrahydrofuran, 99% 13423-15-9
Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400 9036-15-1
Cyclohexanone, 99.8% 108-94-1
1-Bromo-3-chloropropane, p.a. 109-70-6
2-Octenoic acid, 90-95% trans 1871-67-6
Fluorene (Techn), 90% (UV-Vis) 86-73-7
Chrysene, 98% 218-01-9
Aluminum chloride hexahydrate, 99% 7784-13-6
Carmine certified alum lake 1390-65-4
Carmine, high purity biological stain, (alum lake of carminic 1390-65-4
Trichlorovinylsilane, 96% 75-94-5
p-Xylene, 99% 106-42-3
p-Xylene, scintillation grade, 99% 106-42-3
Cyclooctanemethanol, 97% 3637-63-6
m-Xylene, spectro grade 108-38-3
2,3,3-Trichlorotetrahydrofuran, 98% 0-00-1
4-Chloro-1-(2,5-Dimethylphenyl)-1-Butanone 71526-84-6
4-Chloro-1-(2,4-Dimethylphenyl)-1-Butanone 74298-65-0
Fast Green FCF, High Purity Biological Stain 2353-45-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net