Search   
MSDS 
:
 Nitrazine Yellow, Indicator Grade
CAS 
:
 5423-07-4
SYNONYMS 
:
 C.I. 14890;     3-(2,4-Dinitrophenylazo)-4-Hydroxy-2,7-Napthalenedisulfonic Acid,     Disodium Salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5423-07-4 |Nitrazine Yellow, Indicator Grade | ca. 100% | 226-549-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 5

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Heating may cause an explosion.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. Low hazard for usual
industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Exposure to heat may promote violent decomposition.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. This material is an explosion
hazard when exposed to heat, mechanical shock, or friction.
Containers may explode in the heat of a fire.
Extinguishing Media:
Use carbon dioxide or dry chemical. Use agent most appropriate to
extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Material is heat, shock and/or friction sensitive. Use care in
handling and storage. Avoid breathing dust, vapor, mist, or gas.
Avoid contact with eyes, skin, and clothing. Avoid contact with skin
and eyes. Keep container tightly closed. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5423-07-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: bordeux
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C16H8N4O11S2Na2
Molecular Weight: 542.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Heating may cause an explosion.
Conditions to Avoid:
Incompatible materials, dust generation, temperatures above 250C,
strong oxidants.
Incompatibilities with Other Materials:
Heat, oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5423-07-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Nitrazine Yellow, Indicator Grade -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 5 Heating may cause an explosion.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 5423-07-4: No information available.
Canada
CAS# 5423-07-4 is listed on Canada's NDSL List.
CAS# 5423-07-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5423-07-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methyl-2-pyrrolidinone, 99+%, spectrophotometric grade 872-50-4
1-Methyl-2-pyrrolidinone, 99% 872-50-4
Sodium Iodide, 99.999% 7681-82-5
Guanidine Hydrochloride, 99% (Contains 0.2-0.4% SiO2 as Anti-Caking 50-01-1
Guanidine Hydrochloride, 98% 50-01-1
Phenoxy resin, average m.w. 70000 26402-79-9
N,N-Dimethylbenzylamine, 98% 103-83-3
N,N-Dimethylformamide, 99% 68-12-2
2-Methylbutane, 99+% 78-78-4
2-Methylbutane, 99+%, spectrophotometric grade 78-78-4
N,N-Dimethylformamide, P.A. 68-12-2
Polyethyleneglycol 300 Monononylether (Fractionated, Fraction 5) 39587-22-9
Polyethyleneglycol 300 Monooctylether 27252-75-1
Polyethyleneglycol 300 Monooctylether (Fractionated, Fraction 2) 27252-75-1
6-Ketocholestanol, 99% 1175-06-0
Polyethyleneglycol 300 monooctylether (Fractionated, Fraction 5) 27252-75-1
Dicyandiamide, 99.5% 461-58-5
Nitrazine Yellow, Indicator Grade 5423-07-4
Polyethyleneglycol 400 Monooctylether 27252-75-1
Polyethyleneglycol 600 Monooctylether 27252-75-1
N,N-Dimethylformamide for HPLC 68-12-2
N,N-Dimethylformamide, Reagent ACS 68-12-2
N,N-Dimethylformamide, Nonaqueous Titration Grade, 99+% (GC) 68-12-2
2-Isonitrosoacetophenone, 99% 532-54-7
N,N-Dimethylformamide, Reagent ACS, Spectro Grade, 99.8% (GC) 68-12-2
N,N-Dimethylformamide, 99+% Spectrophotometric Grade 68-12-2
R(+)-alpha-methylbenzyl isocyanate, 95% 33375-06-3
s-(-)-1-Phenylethylamine, 98% (uv-vis) 2627-86-3
r-(+)-1-Phenylethylamine, 98% (uv-vis) 3886-69-9
1,4-Dichlorobutane, 99+% 110-56-5
(-)-Taddol, 98%, (99% e.e.) 93379-48-7
3-Methyltetrahydrofuran, 99% 13423-15-9
Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400 9036-15-1
Cyclohexanone, 99.8% 108-94-1
1-Bromo-3-chloropropane, p.a. 109-70-6
2-Octenoic acid, 90-95% trans 1871-67-6
Fluorene (Techn), 90% (UV-Vis) 86-73-7
Chrysene, 98% 218-01-9
Aluminum chloride hexahydrate, 99% 7784-13-6
Carmine certified alum lake 1390-65-4
Carmine, high purity biological stain, (alum lake of carminic 1390-65-4
Trichlorovinylsilane, 96% 75-94-5
p-Xylene, 99% 106-42-3
p-Xylene, scintillation grade, 99% 106-42-3
Cyclooctanemethanol, 97% 3637-63-6
m-Xylene, spectro grade 108-38-3
2,3,3-Trichlorotetrahydrofuran, 98% 0-00-1
4-Chloro-1-(2,5-Dimethylphenyl)-1-Butanone 71526-84-6
4-Chloro-1-(2,4-Dimethylphenyl)-1-Butanone 74298-65-0
Fast Green FCF, High Purity Biological Stain 2353-45-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net