Search   
MSDS 
:
 Fluorene (Techn), 90% (UV-Vis)
CAS 
:
 86-73-7
SYNONYMS 
:
 9H-Fluorene; o-Biphenylenemethane; Diphenylenemethane;     2,2'-Methylenebiphenyl.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 86-73-7 |Fluorene | 90 | 201-695-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not let this chemical enter the environment.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 86-73-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 298 deg C
Freezing/Melting Point: 112-116 deg C
Autoignition Temperature: Not available.
Flash Point: 151 deg C ( 303.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble.
Specific Gravity/Density: 1.2
Molecular Formula: C13H10
Molecular Weight: 166.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 86-73-7: LL5670000
LD50/LC50:
Not available.
Carcinogenicity:
Fluorene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish toxicity :LC50 (48hr) fathead minnow > 100mg/l (Finger, S.E. et
al ASTM Spec. Tech. Publ. 865 1985); LC50 (24hr) bluegill sunfish,
goldfish +/-5mg/l (Wood, E.M. The toxicity of 3400 chemicals to fish
1987); LC50 (unspecified exposure) himedaka killifish 3,3mg/l
(Niiromi, J. et al Mie-ken Kankyo Kagaku Senta Kenkyu Hokuku 1989)
Invertebrate toxicity : EC50 (48hr) Daphnia magna 0,43 mg/l (Finger,
S.E. et al ASTM spec. Tech. Publ. 865 1985); LC50 (96hr) Neanthes
arenacoedentata 1mg/l (Rossi, S. S. et al Mar. Pollut. Bull. 1978)

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
USA RQ: CAS# 86-73-7: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 86-73-7: No information available.
Canada
CAS# 86-73-7 is listed on Canada's DSL List.
CAS# 86-73-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 86-73-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/25/1999 Revision #3 Date: 10/15/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methyl-2-pyrrolidinone, 99+%, spectrophotometric grade 872-50-4
1-Methyl-2-pyrrolidinone, 99% 872-50-4
Sodium Iodide, 99.999% 7681-82-5
Guanidine Hydrochloride, 99% (Contains 0.2-0.4% SiO2 as Anti-Caking 50-01-1
Guanidine Hydrochloride, 98% 50-01-1
Phenoxy resin, average m.w. 70000 26402-79-9
N,N-Dimethylbenzylamine, 98% 103-83-3
N,N-Dimethylformamide, 99% 68-12-2
2-Methylbutane, 99+% 78-78-4
2-Methylbutane, 99+%, spectrophotometric grade 78-78-4
N,N-Dimethylformamide, P.A. 68-12-2
Polyethyleneglycol 300 Monononylether (Fractionated, Fraction 5) 39587-22-9
Polyethyleneglycol 300 Monooctylether 27252-75-1
Polyethyleneglycol 300 Monooctylether (Fractionated, Fraction 2) 27252-75-1
6-Ketocholestanol, 99% 1175-06-0
Polyethyleneglycol 300 monooctylether (Fractionated, Fraction 5) 27252-75-1
Dicyandiamide, 99.5% 461-58-5
Nitrazine Yellow, Indicator Grade 5423-07-4
Polyethyleneglycol 400 Monooctylether 27252-75-1
Polyethyleneglycol 600 Monooctylether 27252-75-1
N,N-Dimethylformamide for HPLC 68-12-2
N,N-Dimethylformamide, Reagent ACS 68-12-2
N,N-Dimethylformamide, Nonaqueous Titration Grade, 99+% (GC) 68-12-2
2-Isonitrosoacetophenone, 99% 532-54-7
N,N-Dimethylformamide, Reagent ACS, Spectro Grade, 99.8% (GC) 68-12-2
N,N-Dimethylformamide, 99+% Spectrophotometric Grade 68-12-2
R(+)-alpha-methylbenzyl isocyanate, 95% 33375-06-3
s-(-)-1-Phenylethylamine, 98% (uv-vis) 2627-86-3
r-(+)-1-Phenylethylamine, 98% (uv-vis) 3886-69-9
1,4-Dichlorobutane, 99+% 110-56-5
(-)-Taddol, 98%, (99% e.e.) 93379-48-7
3-Methyltetrahydrofuran, 99% 13423-15-9
Merrifield's peptide resin, 2% cross- linked, 2-2.5 meq cl/g, 200-400 9036-15-1
Cyclohexanone, 99.8% 108-94-1
1-Bromo-3-chloropropane, p.a. 109-70-6
2-Octenoic acid, 90-95% trans 1871-67-6
Fluorene (Techn), 90% (UV-Vis) 86-73-7
Chrysene, 98% 218-01-9
Aluminum chloride hexahydrate, 99% 7784-13-6
Carmine certified alum lake 1390-65-4
Carmine, high purity biological stain, (alum lake of carminic 1390-65-4
Trichlorovinylsilane, 96% 75-94-5
p-Xylene, 99% 106-42-3
p-Xylene, scintillation grade, 99% 106-42-3
Cyclooctanemethanol, 97% 3637-63-6
m-Xylene, spectro grade 108-38-3
2,3,3-Trichlorotetrahydrofuran, 98% 0-00-1
4-Chloro-1-(2,5-Dimethylphenyl)-1-Butanone 71526-84-6
4-Chloro-1-(2,4-Dimethylphenyl)-1-Butanone 74298-65-0
Fast Green FCF, High Purity Biological Stain 2353-45-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net