Material Safety Data Sheet (MSDS) Issue Date: November 1, 2000 MSDS # : 400
Revised January 29, 2004, Reformatted, No Change to Text
Page 1
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Nickel Alloys 15 - 7MO, 16 - 5PH, 17 - 4PH, 286, 330, 400, 600, 601, 617, 625, 718, 800 / 800H, C276, HX, X750, WASPALOY, 825, MONEL
K500, NICKEL 200, PURE NICKEL, NI - CU, NI - CR, NI - FE - CR.
Synonyms : None
TW Metals Company, Inc. The Arboretum, 760 Constitution Drive, Exton PA 19341
Emergency Phone Number Chemtrec (24 hrs) 1-800-424-9300 or Contact Your Nearest TW Metals Office
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
Occupational
Exposure Limits ( mg / m3 )
Ingredient CAS # % Weight OSHA PEL ACGIH TLV
*Nickel ( Ni ) 7440 - 02 -0 7- 99 . 9 1 . 0 ( Ni ) 1 . 0 ( Ni )
Iron ( Fe ) 7439 - 89 -6 0- 78 10 ( oxide, dust & fume ) 10 ( oxide,dust & fume )
*Copper ( Cu ) 7441 - 50 -8 0- 68 0 . 1 ( fume ) 0 . 2 ( fume )
*Chromium ( Cr ) 7440 - 47 -3 0- 48 1 ( Cr ) 0 . 5 ( Cr )
Molybdenum ( Mo ) 7439 - 98 -7 0- 16 15 ( total dust ) 15 ( insoluble )
*Cobalt ( Co ) 7440 - 48 -4 0- 12 . 5 0 . 1 ( Co ) 0 . 02 ( Co )
Columbium ( Cb ) 0-5.3
Tungsten ( W ) 7440 - 33 -7 0- 4 . 5 5 ( insoluble )
Titanium ( Ti ) 7440 - 32 -6 0- 3 15 ( TiO2 ) 10 ( TiO2 )
**Aluminum ( Al ) 7429 - 90 -5 0- 2 . 9 15 ( total dust ) 5 ( welding fumes )
*Manganese ( Mn ) 7439 - 96 -5 0- 2 5 . 0 ( fume ) 0 . 2 ( Mn )
Tantalum ( Ta ) 7440 - 25 -7 0- 2
Silicon ( Si ) 7440 - 21 -3 0- 1 . 2 15 ( dust ) 10 ( inhaled dust )
**Vanadium ( V ) 7440 - 62 -2 0- 0 . 15 0 . 5 ( oxide dust ) 1 . 5 ( oxide fume ) 0 . 5 ( fume, dust )
Note: Those elements identified by an * and those elements capable of generating highly toxic fumes or dusts (identified by a **) are classified as toxic by EPA
in 40 CFR 372.65 and subject to reporting requirements of SARA Title III Section 313 and 40 CFR 372
SECTION 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: Nickel alloys in their solid state present no inhalation, ingestion or contact health hazard. However, inhaling dusts, fumes or mists
which may be generated during certain manufacturing procedures (burning, melting, welding, sawing. brazing. grinding and machining) may be hazardous to
your health. Dusts may also be irritating to the unprotected skin or eyes.
ACUTE EFFECTS: Excessive exposure to dusts / fumes may cause irritation of eyes, nose or throat.
Inhalation of dusts / fumes may result in metal fume fever (metallic taste in mouth, dryness and irritation of throat, chills and fever).
CHRONIC EFFECTS: Prolonged inhalation of fumes or dusts may cause a variety of adverse health effects to the respiratory system, including ( but not
necessarily limited to) lesions of the mucous membrane, bronchitis, pneumonia and cancers fo the nasal cavity and respiratory tract.
POTENTIAL HEALTH EFFECTS/MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
Any pre-existing chronic respiratory condition (asthma, chronic bronchitis, emphysema).
ROUTES OF ENTRY: Inhalation (dusts / fumes / mists), Contact with Skin and Eyes (dusts / mists), Ingestion (dusts).
SECTION 4 - FIRST AID MEASURES
INHALATION: Immediately remove victim to fresh air. If condition persists, consult physician.
EYE CONTACT: Immediatly flush with running water to remove particulates, consult physician.
SKIN CONTACT: If irritation develops, remove clothing and wash with soap and water. If condition persists, consult physician.
INGESTION: Consult physician.
NOTE TO PHYSICIAN: None.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Nonflammable.
SPECIAL FIRE FIGHTING INSTRUCTIONS AND EQUIPMENT: None required.
AUTOIGNITION TEMPERATURE: NA
FLAMMABLE LIMITS: Nonflammable.
EXTINGUISHING MEDIA: Use what is appropriate for surrounding fire.
HAZARDOUS COMBUSTION PRODUCTS: None.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
CLEAN UP PROCEDURES: No special procedures needed.
SPECIALIZED EQUIPMENT: None.
SECTION 7 - HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING: Minimize activities which may generate dusts, mists or fumes. Keep areas well ventilated. Use suitable
equipment to move materials.
PRECAUTIONS TO BE TAKEN IN STORAGE: None required.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
RESPIRATORY PROTECTION: Wear NIOSH approved dust / mist / fume respirator when welding or burning this metal.
EYE/FACE PROTECTION: Face shields (welding or burning), Safety glasses (cutting or grinding).
OTHER PROTECTIVE EQUIPMENT: Use apropriate protective clothing such as welding aprons and gloves when welding or burning.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Metal VAPOR PRESSURE: NA
ODOR: Odorless BOILING POINT (C) : NA
PHYSICAL STATE: Solid SOLUBILITY IN WATER : Insoluble
VAPOR PRESSURE: NA SPECIFIC GRAVITY(H20=1): 7 . 80 - 9 . 24
Material Safety Data Sheet (MSDS) Issue Date: November 1, 2000 MSDS # : 400
Revised January 29, 2004, Reformatted, No Change to Text
Page 2
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable under normal storage conditions.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None.
HAZARDOUS DECOMPOSITION PRODUCTS (when heated): Hydrogen (contact with acids).
MATERIALS TO AVOID: Strong Acids (such as Sulfuric, Hydrochloric, Nitric) / Oxidizing Agents.
SECTION 11 - TOXICOLOGY INFORMATION
LETHAL CONCENTRATION (LC50) : None established.
REPRODUCTIVE EFFECTS: NA
LETHAL DOSE (LD50) : NA
MUTAGENICITY: NA
TERATOGENICITY: NA
CARCINOGENIC BY NTP, IARC OR OSHA: No (Note: Fumes / dusts / mists from this material may be carcinogenic if inhaled over long periods of time).
SECTION 12 - ECOLOGICAL INFORMATION
No Adverse ecological effects are expected.
SECTION 13 - DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: Recycle scrap materials through scrap dealers and brokers. Dispose of used non-cyclable materials in accordance with local,
state and federal regulations.
SECTION 14 - TRANSPORT INFORMATION
No special DOT regulations pertaining to this material.
SECTION 15 - REGULATORY INFORMATION
SARA: Some components of this product are classified as toxic by the EPA in 40 CFR 372 . 65 and subject to reporting requirements of SARA Title III Section
313 and 40 CFR 372 . 45
SECTION 16 - OTHER INFORMATION
OTHER PRECAUTIONS: Take appropriate precautions when moving or shipping this material to prevent injury to personnel handling it.
DISCLAIMER:
Information included in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any
representation or warranty, expressed or implied regarding its accuracy or correctness. The conditions or methods of handling, storage, use and/or
disposal of this product are beyond the control and knowledge of the manufacturer. Therefore, the manufacturer cannot assume responsibility for
adverse events which may occur in the use and/or misuse of this product and expressly disclaims liability for loss, damage and/or expense arising
out of or in any way connected with the handling, storage, use and/or disposal of this product.
|