MATERIAL SAFTY DATE SHEET
JUST-FOR-COPPER PRO, Part No. JFCP-052 and JFCP-054
This MSDS is being provided to your company for the purpose of providing current health and safety information to your
management and for your employees who work with this product. Please read the information on these sheets and then
provide this information to those people at your company whose responsibility it is to comply with FEDERAL, STATE and
COMMUNITY RIGHT TO KNOW regulations. Also, make this information available to any employee who requests it.
If Jackson Industries, Inc. considers the formula of this product to be a trade secret, the exact chemical names of the
ingredient(s) and the percentages in which they are combined will not appear in the body of this sheet. The exact
composition is available upon request to physicians, industrial hygienists and other health professionals.
IN CASE OF AN EMERGENCY CONTACT Jackson Industries, Inc. at: 479-967-5746
SECTION 1 鈥? CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: JUST-FOR-COPPER PRO, Solderless Copper Bonding
Manufacturer: Grupo Corassa, S. A.
Distributor: Jackson Industries, Inc.
Address: 400 Lake Ridge Drive, Russellville, AR 72802
Health: 0 Fire: 0 Reactivity: 0
HMIS Code:
SECTION 2 鈥? COMPOSITION/INFORMATION ON INGREDIENTS
Material/CAS Reg No. Hazardous Percentage Exposure Limit Units
No Limit Established
POLYGLYCOL No 50 鈥? 80%
DIMETHACRYLATE
BISPITENOL A FUMARATE No 10 TO 40% No Limit Established
RESIN
INSOLUBLE SACCHARIN No 2 to 8% No Limit Established
No Limit Established
CUMENE HYDROPEROXIDE No 1 to 5 %
No Limit Established
N, N-DIALKYTOLUIDINES No 0.1 to 1%
No Limit Established
ACRYLIC ACID No 0.1 to 0.9%
This document is prepared pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200)
SECTION 3 鈥? HAZARDS IDENTIFICATION
Eyes: Can cause eye irritation. Symptoms include: redness, stinging, tearing, swelling.
Skin Contact, Can cause moderate irritation on persons with ultra-sensitive skin..
Inhalation & Ingestion: No breathing risks. Ingestion could cause nausea.
Health Data: This product has a no risk of toxicity for everyday consumer and professional use.
JFC PRO MSDS 15 APRIL 20051.doc Page 1 of 4
MATERIAL SAFTY DATE SHEET
JUST-FOR-COPPER PRO, Part No. JFCP-052 and JFCP-054
SECTION 4 鈥? FIRST AID MEASURES
Eyes: If contact with eyes, flush eyes gently with water FOR AT LEAST 15 MINUTES while holding
eyelids apart. Seek immediate medical attention.
Skin Contact: After using product, wash with soap and water.
Inhalation: No risks from inhalation.
Swallowing: Swallowing small amounts is not likely to cause any effects. Swallowing large amounts may
cause nausea.
SECTION 5 鈥? FIREFIGHTING MEASURES
Flash point: Not flammable and does not support combustion.
Flammability Limits : Not flammable.
Extinguishing Media: Not applicable. Does not support combustion.
Special Fire Fighting Procedures: Not applicable.
SECTION 6 鈥? ACCIDENTAL RELEASE MEASURES
Spills or Releases: Soak up with an inert absorbent. Store in partly filled container until disposal. Incinerate following
EPA and local regulations.
SECTION 7 鈥? STORAGE AND HANDLING
Handling Procedures: No special handling or storage procedures required.
SECTION 8 鈥? EXPOSURE CONTROL/PERSONAL PROTECTION
Protective Gloves: No protective gloves required unless skin is ultra-sensitive 鈥? in this event any type glove can
be used.
Respiratory Protection: None required
Skin Protection: If skin is ultra sensitive, wear any type glove when applying.
Ventilation: Not volatile. No special ventilation required.
Eye Protection: No special eye protection required.
SECTION 9 鈥? PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Brown colored liquid.
Odor: Mild odor.
Boiling Point: Not determined.
Molecular Weight: Not determined.
JFC PRO MSDS 15 APRIL 20051.doc Page 2 of 4
MATERIAL SAFTY DATE SHEET
JUST-FOR-COPPER PRO, Part No. JFCP-052 and JFCP-054
Specific Gravity (Water=1):1.4 at 70oF
Solubility in Water: Does not disperse in water.
Vapor Pressure: Not determined.
Freezing Point: Not determined.
% Volatile by Volume: Not determined.
Evaporation Rate: Not determined.
Vapor Density (Air=1) Not determined.
pH: Not determined
SECTION 10 鈥? STABILITY AND REACTIVITY
Stability: Stable.
Temperatures below -600F.
Conditions to Avoid:
Incompatibilities: No incompatibilitires.
Hazardous Decomposition: No hazardous decomposition products.
Hazardous Polymerization: Product will not undergo hazardous polymerization.
SECTION 11 鈥? TOXICOLOGY INFORMATION
No
Carcinogenicity: No No
NTP: IA OSHA
R Regulated:
C:
SECTION 12 鈥? ECOLOGICAL INFORMATION
Food Chain
Substance CON Potential Waterfowl Toxicity BOD Aquatic Toxicity
No data available No data available No data available No data available
SECTION 13 鈥? DISPOSAL CONSIDERATIONS
Waste Disposal Procedures: No hazardous ingredients, dispose of in accordance with federal, state and local
regulations.
SECTION 14 鈥? TRANSPORTATION INFORMATION
DOT Label: Non-regulated by DOT
Ocean (IMDG): Not regulated.
Air (IATA): Not regulated.
WHMIS (Canada): Not regulated.
JFC PRO MSDS 15 APRIL 20051.doc Page 3 of 4
MATERIAL SAFTY DATE SHEET
JUST-FOR-COPPER PRO, Part No. JFCP-052 and JFCP-054
This description is provided to assist in the proper classification of this product and may not be suitable for all shipping
conditions.
SECTION 15 鈥? REGULATORY INFORMATION
Substance SARA 313 TSCA Inventory CERCLA RQ RCRA Code
SECTION 16 鈥? OTHER INFORMATION
Date entered: 15 April 2005, Miles Jackson
Date revised:
Jackson Industries, Inc. provides the information contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. Individuals receiving this information must exercise their independent judgment in
determining its appropriateness for a particular purpose. Jackson Industries, Inc. makes no representations or
warranties, either expressed or implied, of merchantability, fitness for a particular purpose with respect to the information
set forth herein or to the product to which the information refers. Accordingly, Jackson Industries, Inc. will not be
responsible for damages resulting from use of or reliance upon this information.
JFC PRO MSDS 15 APRIL 20051.doc Page 4 of 4
|