Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 1 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
1. Description of substance/preparation and company
Substance/preparation:
Description/trade name: Kleenmold Base 10 (resin for precoat)
Product code: 800775A
(note: see Safety Data Sheet for Kleenmold Base 10 Catalyst)
Producer/supplier:
Name: ELNA International Telephone no.: (908) 862-7344
Street/post box: 5 North Stiles Street
PLZ/town: Linden, New Jersey 07036 USA FAX no.: (908) 862-5374
Contact: Mr. Chris Fensham Emergency no.: (908) 862-7344
2. Composition/components
Chemical characterization:
Epoxy resin and graphite.
Dangerous components: None.
Other hazardous components:
Graphite (CAS No. 7782-42-5)
Additional comments: -
3. Possible dangers
Description of dangers: None
Special comments for human being and environment:
- Base 10 may cause moderate skin irritation, and causes moderate eye
irritation.
4. First-Aid
General comments: Remove contaminated clothing and shoes. Launder before
reuse.
Inhalation: If excessive amounts of vapors or mists are inhaled, remove individual
to fresh air. Consult physician immediately.
Skin contact: Wash with soap and water.
Eye contact: Flush eyes with plenty of water for at least 15 minutes. Seek medical
attention if irritation persists.
Ingestion: Do not induce vomiting, get medical attention immediately.
Comments for physician: None.
5. Measures of fire fighting
Extinguishing media: Foam, dry chemical, and carbon dioxide.
Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 2 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
Special dangers by the product/preparation itself, by products of combustion or by
resultant gases: Resultant decomposition products include fumes, smoke, carbon
monoxide, carbon dioxide, amines, aldehydes, and other decomposition
products in case of incomplete combustion.
Special equipment on fire fighting: Use self contained breathing apparatus
(pressure demand MSHA/NIOSH approved or equivalent) and full
fire fighting turn out gear in fighting fires near or involving the
product. Thoroughly decontaminate fire fighting equipment after use.
Additional comments: Use water spray to keep fire-exposed containers cool.
6. Measures on unintentional release
Personnel measures:
- Avoid contact with skin and eyes, do not breathe in
vapors/aerosols/products of decomposition.
- The vapors are heavier than air, they spread out on ground.
- Take care of skidding when the product came out, especially in mixture
with water.
Environmental measures:
- Keep product out of ground water, watercourses or sewage plants.
- Point out to the authorities, when the product came into ground water,
watercourses or canalization or has contaminated the ground.
Procedure of purification/absorption:
- Ventilate area, extinguish all sources of ignition. Prevent spread of spill.
- After release absorb with suitable material (e.g. sand, sawdust). Dispose
contaminated absorbent (see capt. 13). Clean contaminated areas
thoroughly.
Additional comments:
- Avoid contact with oxidizing substances.
- Dispose mixtures with water (see capt. 13).
7. Handling and storage
Handling:
Comments for safe handling:
- Avoid or minimize the formation of vapors/aerosols.
- On formation of vapors/aerosols/products of decomposition handle with
adequate ventilation.
- Avoid contact with eyes and skin.
Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 3 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
Comments on protection of fire and explosions:
- On mixing with oxidizing substances danger of inflammation and
explosions!
Storage:
Requirements on storage rooms and containers:
- Keep cool in solvent resistant containers, far from heat, sparks, flames,
other ignition sources. Avoid contact with oxidizing substances; keep not
used containers tightly closed.
- Shelf life is one year from date of manufacture.
Comments on storage together: Do not store with food, drinks, and animal food.
Additional comments:
- Avoid income in the ground safely.
- Empty not cleaned containers with residues of substances or vapors are
a sources of dangers.
8. Limitation of exposition and personal protection
Additional comments on arrangement of technical equipment: See capt. 7.
Components with exposure limits in relation to the working place:
CAS # Name Type of Limit Value Units
OSHA PEL1 mg/m3*
7782-42-5 Graphite 2.5
ACGIH TLV2 mg/m3*
2.0
1
= Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL), USA
2
= American Conference of Governmental Hygienists (ACGIH) Threshold Limit Value (TLV), USA
*
= milligrams per cubic meter (as dust)
Personal protection:
Respiratory requirements:
- On formation of vapors/aerosols and if limit values are possibly
exceeded in small rooms take breathing apparatus with filter type A-P2
(for additional information see capt. 16).
Hand protection: Use solvent-resistant protective gloves.
Eye protection: Use splash goggles or face shield.
Body protection: Use solvent-resistant apron or other impervious clothing.
Measures for protection and hygiene:
- Avoid contact with skin and eyes, do not breathe in
vapors/aerosols/products of decomposition.
- Remove immediately contaminated clothing and shoes.
Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 4 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
- Clean skin thoroughly after contact, before breaks and at end of work
period; product is readily removed from skin by washing thoroughly with
soap and water.
- Do not eat, drink and smoke in working place.
9. Physical and chemical properties
Appearance: Acknowledgments:
Form: Semi-fluid.
Color: Black.
Odor: Bland.
Safety data:
pH-value (delivery state): (20掳C) n/e -
pH-value (90g/l water): (20掳C) - -
Melting point/range: n/e 掳C
Boiling point/range: 35 掳C
Flash point: >132 掳C method: closed cup
Ignition temperature: n/e 掳C
Flammability: - -
Autoignition: - -
Oxidizing properties: - -
Explosion limits: - vol.%
Vapor pressure: (20掳C) 0.10 mmHg
Specific Gravity: (20掳C) 1.38
Solubility in water: (20掳C) Nil Solubility in water is limited.
Solubility in solvent: (20掳C) n/e g/l
Solubility in fad: (20掳C) n/e g/l
Viscosity: (25掳C) n/e
Content of organic solvent: n/e wt.%
Additional comments: No.
10. Stability and reactivity
Avoid the following conditions:
- Keep the product far from heat, sparks, flames and other ignition sources!
Avoid the following materials:
- Avoid contact with oxidizing substances - danger of inflammation or explosions!
Dangerous products of decomposition:
- On influence of fire or heat, formation of oxides of carbon, amines, aldehydes
and other decomposition products in case of incomplete combustion.
Additional comments:
- Stable under normal conditions; no polymerization, no reaction with water.
11. Toxicological information
Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 5 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
Toxicological tests:
Practical experience:
Observations relevant for classification:
- Acute toxicity: n/e
- Specific symptoms in animal experiment: n/e
- Irritating/corrosive effects: n/a
- Sensibilisation: n/a
- Effects after repeated or prolonged exposition: Skin contact tends to remove skin
oils possibly leading to irritation and dermatitis, or allergic reactions.
- Carcinogenic influence: n/a
- Influence of genetic changes: n/a
- Influence on reproduction: n/a
- Further comments: None.
General acknowledgments: No.
12. Ecological information
Measures of elimination (persistence and degradation):
Procedures/methods of analysis, yield of elimination: Biological
degradation is limited.
Text of valuation:
Additional comments: No.
Behavior in environment: Avoid income of the product in environment.
Mobility: -
Potential of bioaccumulation: -
Additional comments: No.
Ecotoxical influence:
Toxicity in water: -
Influence on sewage plants: Can be eliminated, solubility in water is
limited.
Inhibition of fermentation of municipal sludge: -
Additional comments: No.
Additional comments on ecology:
CSB-value: n/e mg O2/g Low, solubility in water is limited.
RSB0-value: n/e mg/O2/g Low, solubility in water is limited.
AOX-information: -
Materials in according to EG law: No.
General comments: No.
13. Comments on waste disposal
Total Lubricants USA, Inc. Telephone (908) 862-7344
Glass Products Division
5 North Stiles Street FAX (908) 862-5374
Linden, New Jersey 07036
U.S.A.
Date: 12/7/2005 Revised 11/29/04
Product Name: Kleenmold Base 10 Product code: 800775A
Page 6 of 7 V:\EU-MSDS\ELNA\KLMD_B10.doc
Product: Reuse or dispose.
Recommendation: No.
Waste key No./Name:
- 559 03 Resin residues, not cured (obligation for prove): reuse or dispose.
- 351 05 Iron metal containers, emptied: reuse after purification.
Recommended remedy for purification: Water and surface active agents.
14. Comments on transportation
Land Transport (ADR): Not regulated as a dangerous good
Air Transport (IATA/ICAO): Not regulated as a dangerous good
Sea Transport (IMDG): Not regulated as a dangerous good
15. Regulations
Labels:
Nomination of danger: none
Description of danger: -
Contains: -
R-sentence: -
S-sentence: -
Other regulations: n/a
16. Additional comments
Additional comments:
Education: -
Recommended use: For industrial use only. See technical bulletin.
Recommended restrictions: Avoid contact with skin and eyes.
Additional information: -
Sources of data: -
Abbreviations: n/a = not applicable n/e = not established
Department which elaborated this data sheet: Steve Smith, Regulatory Manager,
TOTAL Lubricants USA Inc., for the ELNA International Division.
Contact: See capt. 1.
The above information is accurate to the best of our knowledge. However, since data, safety
standards, and government regulations are subject to change, and the conditions of handling
and use, or misuse, are beyond our control, seller makes no warranty, either expressed or
implied, with respect to the completeness or continuing accuracy of the information contained
herein and disclaims all liability for reliance thereon. Users should satisfy themselves that
they have all current data relevant to their particular use.
|