Page 1 of 4
First issue: May. 03, 2005
Revised: Oct. 01, 2007
Product, MSDS No. 027
MATERIAL SAFETY DATA SHEET
1. PRODUCT & COMPANY IDENTIFICATION
AMINOFOAMERTM 锛︼棘锛わ汲锛嶏棘
PRODUCT NAME:
GENERAL USE: Cosmetic ingredients
MANUFACTURER鈥橲 NAME: ASAHI KASEI CHEMICALS CORPORATION
SECTION: Cosmetic Ingredient & Detergent Marketing
Functional Additives Division
ADDRESS: 1-2, Yurakucho 1-chome
Chiyoda-ku, Tokyo 100-8440, Japan
TELEPHONE NUMBER: +81-3-3507-2515
FAX NUMBER: +81-3-3507-2375
EMERGENCY
TELEPHONE NUMBER: +81-44-271-2639
___________________________________________________________________
2. COMPOSITION, INFORMATION ON INGREDIENTS
CHEMICAL NAME: Sodium N-Lauroyl-L-aspartate Solution
CHEMICAL FORMULA: XOOC-CH2-CH-COONa
鈹?
CH3(CH2)10CO-NH X: Na or H
CONTENT: about25%(0.7锝?1.4% as N) water about75%
INCI NAME: SODIUM LAUROYL ASPARTATE, WATER(AQUA)
CAS REGISTRY NUMBER: Un-registering
EINECS: Un-registering
TSCA: Un-registering
___________________________________________________________________
3. HAZARDS IDENTIFICATION
PHYSICAL & CHEMICAL HAZARDS:
Incombustible liquid material.
POTENTIAL HEALTH EFFECTS:
Very low. May cause skin and eye irritation to
hypersensitive persons.
ENVIROMENTAL INFLUENCE:
None (Biodegradation is good).
Page 2 of 4
First issue: May. 03, 2005
Revised: Oct. 01, 2007
Product, MSDS No. 027
MATERIAL SAFETY DATA SHEET
4. FIRST-AID MEASURES
EYE CONTACT: Flush with water for at least 15 minutes. If irritation occurs
and persists, obtain medical attention.
SKIN CONTACT: Wash with plenty of water. Get medical attention if
irritation curs and persists.
INHALATION: Remove to fresh air, if breathing difficulty or discomfort
occurs and persists, obtain medical attention.
INGESTION: Drink plenty of water, if any discomfort persists, obtain
medical attention. Since alcoholic ingestion strengthens
detrimental nature, it is not made to take in.
SPECIAL PROTECTION: Special protection is unnecessary.
___________________________________________________________________
5. FIRE-FIGHTING MEASURES
POTENTIAL NATURE: No inflammability.
EXTINGUISHING MEDIA: Generally use extinguishing media such as water, carbon
dioxide, dry chemical powder, and foam.
FIREFIGHTING INSTRUCTIONS:
Sever the source of combustion to the origin of a fire.
Shoot extinguishing medium as in an ordinary type of fire.
PROTECTION OF THOSE WHO EXTINGUISH THE FIRE:
Wear protection implements, such as self-support type
respirator and protection clothes.
___________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
NOTE TO HUMAN: None especially.
NOTE TO ENVIRONMENT: Biodegradation is high.
LAND SPILL: Suck up the spilled material and flush up the rest with
water and treat with activated sludge; dilute with water to
the concentration below 4%.
___________________________________________________________________
7. HANDLING AND STORAGE
HANDLING: Wear protective equipment such as goggles and gloves.
STORAGE: Store in a cool, dry, well-ventilated indoor location. Protect from
direct sunlight, high temperature, and moisture.
After opening the package, use it out quickly to prevent microbial
deterioration.
Page 3 of 4
First issue: May. 03, 2005
Revised: Oct. 01, 2007
Product, MSDS No. 027
MATERIAL SAFETY DATA SHEET
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
ENGINEERING CONTROLS:
Provide local exhaust ventilation as appropriate.
Make available in the work area emergency shower and eye wash,
and clarify their locations.
PERSONAL PROTECTIVE EQUIPMENT:
Wear personal protective equipment (goggles, gloves, etc.) as
appropriate.
EXPOSURE GUIDELINES:
OSHA PELs TWA unestablished
ACGIH TLVs TWA unestablished
___________________________________________________________________
9. PHYSICAL & CHEMICAL PROPERTIES
APPEARANCE: The slightly yellowish transparent liquid
ODOR: Weak particular odor
1.02锝?1.09 g/cm3
DENSITY:
pH: 5.7锝?7.7(undiluted锛?25鈩?)
Solubility: Miscible with water, ethylene glycol, andpropylene glycol.
___________________________________________________________________
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Chemically stable when used under normal
condition.
SPONTANEOUS COMBUSTIBILITY: None
OXIDIZING PROPERTY: None
FLAMMABILITY: Unflammable
REACTIVITY: Spontaneous combustion nature, reactivity with
water, etc. are none.
SUBSTANCE TO BE AVOIDED: None
DANGER DETRIMENTAL SUBSTANCE WITH DECOMPOSITION:
None
___________________________________________________________________
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY: LD50 >2000mg/kg (Rat oral)
PRIMARY SKIN IRRITATION: Non-irritant (Draize鈥檚 method, Guinea pig)
PRIMARY EYE IRRITATION: Minimal (Draize鈥檚 method, Rabbit)
SKIN SENSITIZATION: Not detective (Buehler鈥檚 method, Guinea pig)
CONTINUOUS SKIN IRRITATION: Not detective (Guinea pig)
MUTAGENICITY TEST(Ames Test): Negative
HUMAN PATCH TEST: Negative
Page 4 of 4
First issue: May. 03, 2005
Revised: Oct. 01, 2007
Product, MSDS No. 027
MATERIAL SAFETY DATA SHEET
12. ECOLOGICAL INFORMATION
EMVIRONMENTAL FATE Biodegradation in aqueous solution
100 mg/l, 25卤1掳C, 28 days
Degree of biodegradation 100% (BOD)
__________________________________________________________________
13. DISPOSAL CONSIDERATIONS
Foams severely, if a great deal is abandoned at the same time.
Treatment with Activated Sludge: Dilute with water to the concentration below than
4%. In high concentration, there is a possibility
of having a damege on slidge.
___________________________________________________________________
14. TRANSPORT INFORMATION
UN Number: Not applicable.
Transportation must be in compliance with national and local laws and regulations.
___________________________________________________________________
15. REGULATORY INFORMATION
EINECS: Un-registering
TSCA: Un-registering
Please refer to national measures that may be relevant.
___________________________________________________________________
This information is furnished without warranty, express or implied, except that it is accurate
to the best knowledge of ASAHIKASEI CHEMICALS CORPORATION. It relates only
to the specific material designated herein, and does not relate to use in combination with
any other material or in any process. ASAHIKASEI CHEMICALS CORPORATION
assumes no legal responsibility for use of or reliance upon this information.
|