MATERIAL SAFETY DATA SHEET

     ParexLahabra, Incorporated                  ParexLahabra, Incorporated

     3830 Singer Blvd. NE Suite 2020             3225 S. Drennan Industrial Loop

     Albuquerque, NM 87109                       Colorado Springs, CO 80910

     Phone: (505) 873-1180                       Phone: (719) 392-9003









     Effective Date: September 12, 2005





     Product(s): ANTIQUING SEALER 6501, 6505





                         Hazardous Ingredients/ Identity Information



  Hazardous             CAS #             OSHA PEL            ACGIH TLV            % by Weight

                                            Mg/m3               Mg/m3

 Components

Acrylic Polymer           NA                 NE                  NE                  11-15%

Ester- Alcohol       25265-77-4             NE                     NE                 1-2%

  “Texanol�

    Water             7732-18-5             NE                     NE                75-85%

                   NE- NON ESTABLISHED               NA- NOT APPLICABLE









      May be used to comply with OSHA� Hazard Communication Standard, 29 CFR 1910.1200.

                                      s

                      Standard must be consulted for specific requirements.

                                                                            ANTIQUING SEALER 6501, 6505









                               Physical/ Chemical Characteristics



Appearance and         White thin liquid, slight ammonia odor

Odor:

Boiling Point:         Variable

Solubility in Water:   Dilutable

Specific Gravity       8.4-8.9 lb/gal

Vapor Density          Greater than 1

(Air = 1):

Vapor Pressure         Less than 1

 (mm Hg):

Melting Point:         NA







                                 Fire and Explosion Hazard Data



Extinguishing Media:           Use that which is appropriate for surrounding fire.

Flammable Limits:              Non-Flammable

Flash Point (Method Used):     Non-Combustible

Special Fire Fighting          None

Procedures:

Unusual Fire and Explosion     Material may spatter above 100 C / 212 F

Hazards:







                                           Reactivity Data



Hazardous Decomposition        May yield acrylic monomers

or Byproducts:

Hazardous Polymerization:      Will not occur

Incompatibility                NA

(Materials to avoid):

Stability:                     Stable

Conditions to Avoid:           Temperatures above 177 C / 350 F

                                                                                                 ANTIQUING SEALER 6501, 6505









                                                     Health Hazard Data



 Route of Entry:   Inhalation:     Vapor or mist can irritate nose, throat, and lungs and cause headache, nausea, drowsiness, slurred

                                   speech, dizziness and unconsciousness in areas of insufficient ventilation.

                         Skin:     Irritating to skin upon repeated or prolonged contact

                         Eyes:     Irritating to eyes

 Carcinogens:                      None listed

 Sign & Symptoms of                None listed

 Exposure:

 Medical Conditions                Sensitive skin may become irritated.

 Generally Aggravated by

 Exposure:

 Emergency and First Aid

 Procedures:

 Eye and Skin Contact:             Flush eyes with large amounts of water. Wash skin areas with soap and water.

 Inhalation:                       Move subject to fresh air.

 Ingestion:                        Dilute by drinking water. See a physician. Never give anything by mouth to an unconscious person.









                                      Procedures for Safe Handling and Use



Steps to Be Taken in          Transfer to container for disposal according to local, state and federal regulations. Keep spills and

Case Material is              cleaning runoffs out of municipal sewers and open bodies of water.

Released or Spilled:



Waste Disposal Method:        See above



Precautions to Be Taken       Keep from freezing- product may coagulate

in Handling and Storage:

Other Precautions:            NA









                                                      Control Measures



Respiratory Protection        Wear suitable respirator (MSHA/ NIOSH approved) where exposure limits are exceeded.

(Specify Type):

Ventilation:                  None required when used outdoors. Provide adequate ventilation when used in enclosed areas.

           Local Exhaust:     At point of contaminant release

              Mechanical:     None

                 Special:     None

                   Other:     Chemical splash goggles (ANSI Z87.1 or equivalent)

Protective Gloves:            Impervious



Eye Protection:               Chemical splash goggles (ANSI Z87.1 or equivalent)



Other Protective Clothing     Wear long sleeved shirt and long pants.

or Equipment:

Work/ Hygienic                Wash hands thoroughly before eating and practice good personal hygiene.

Practices:









                                                 EPA Supplier Notification

The products listed in this MSDS contain no chemicals subject to the reporting requirements of section of 313 of Title III of the

Superfund Amendments and Reauthorization Act of 1986 (SARA) and 40 CFR Part 372.

These products contain no ingredients on the list of Extremely Hazardous Substances of SARA Emergency Planning.

Tier I / Tier II Hazard Category (40 CFR 370): Immediate Health Hazard.