Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 1 - Chemical Product and Company Identification * * *
Part Number: 8016 Osmo Wash and Care Concentrate
Can Sizes: 1.0L, 5.0L, 10L, 25L
Chemical Name: Mixture
Product Use: Water soluble cleaning concentrate/detergent for cleaning of all oil/waxed woodwork.
Synonyms: Cleaning concentrate
Manufacturer Information
Osmo Holz und Color GmbH & Co KG Phone: +49 2581/922-100
Affh眉ppen Esch 12
48231 Warendorf Emergency # +49 251/692-188
Germany Mfg Contact: Berlin: +49 30/19240
* * * Section 2 - Hazards Identification * * *
Emergency Overview
Product is a light yellowish creamy liquid. May cause severe irritation or burns to the eyes, skin, gastrointestinal
tract, and respiratory system.
Potential Health Effects: Eyes
This product is severely irritating to the eyes. Prolonged or repeated exposure may cause eye burns.
Potential Health Effects: Skin
Avoid skin contact with concentrate. Contact with liquid may produce severe skin irritation including redness,
inflammation. Prolonged or repeated exposure may cause skin burns.
Potential Health Effects: Ingestion
Ingestion may produce severe irritation and burns of the digestive tract.
Potential Health Effects: Inhalation
High concentration of product vapors may cause severe irritation or burns of the upper respiratory tract.
* * * Section 3 - Composition / Information on Ingredients * * *
CAS # Component Percent
7732-18-5 Water 60-100
112-80-1 Oleic acid 7-13
69011-36-5 Polyoxyethylene trimethyldecyl alcohol 1-5
1310-73-2 Sodium hydroxide 0.1-1
7647-14-5 Sodium chloride 0.1-1
Component Information/Information on Non-Hazardous Components
This product is considered hazardous under 29 CFR 1910.1200 (Hazard Communication) and the Canadian
Controlled Product Regulations. Other components in this product are considered non-hazardous under the
criteria specified in 29 CFR 1910.1200 (Hazard Communication Standard) and the Canadian Controlled Product
Regulations.
____________________________________________________________
Page 1 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 4 - First Aid Measures * * *
First Aid: Eyes
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
First Aid: Skin
Immediately take off all contaminated clothing. Wash with soap and water and seek medical advice.
First Aid: Ingestion
If the material is swallowed, get immediate medical attention or advice. Do not induce vomiting.
First Aid: Inhalation
If inhaled, immediately remove the affected person to fresh air. Seek medical attention. If not breathing, have
qualified personnel give artificial respiration, preferably mouth-to-mouth. If breathing is difficult, give oxygen. Call
a physician immediately.
* * * Section 5 - Fire Fighting Measures * * *
General Fire Hazards
See Section 9 for Flammability Properties.
This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a
slight fire hazard.
Hazardous Combustion Products
Upon decomposition, this product emits carbon monoxide, carbon dioxide, and/or low molecular weight
hydrocarbons.
Extinguishing Media
Dry chemical, foam, carbon dioxide, water fog.
Fire Fighting Equipment/Instructions
Use water to cool fire-exposed containers and to protect personnel. Fire fighters should wear full-face, self
contained breathing apparatus and impervious protective clothing. Fire fighters should avoid inhaling any
combustion products.
NFPA Ratings: Health: 2 Fire: 0 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
* * * Section 6 - Accidental Release Measures * * *
Containment Procedures
Stop the flow of material, if this is without risk. Remove sources of ignition. Block any potential routes to water
systems.
Clean-Up Procedures
Wear appropriate protective equipment and clothing during clean-up. Ventilate the contaminated area. Absorb
spill with inert material. Shovel material into appropriate container for disposal.
Evacuation Procedures
Isolate area. Keep unnecessary personnel away.
Special Procedures
Wear appropriate personal protective equipment. Avoid contact with skin and eyes. Avoid inhalation of vapors or
mists.
____________________________________________________________
Page 2 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 7 - Handling and Storage * * *
Handling Procedures
Use this product with adequate ventilation. When using this material, do not eat, drink or smoke. Avoid breathing
vapors or mists of this product. Do not get this material in your eyes, on your skin, or on your clothing. Wash
thoroughly after handling.
Storage Procedures
Store in a cool and dry area. Do not store in open, unlabeled or mislabeled containers. Keep container closed
when not in use. Keep container upright, when not in use, to prevent leakage. Open containers carefully and
slowly. Do not reuse empty container.
* * * Section 8 - Exposure Controls / Personal Protection * * *
A: Component Exposure Limits
Sodium hydroxide (1310-73-2)
ACGIH: 2 mg/m3 Ceiling
OSHA: 2 mg/m3 Ceiling
NIOSH: 2 mg/m3 Ceiling
Engineering Controls
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists
generated from the handling of this product.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Wear chemical goggles and face shield.
Personal Protective Equipment: Skin
Use impervious gloves. Use of an impervious apron is recommended.
Personal Protective Equipment: Respiratory
If ventilation is not sufficient to effectively prevent buildup of vapors, appropriate NIOSH respiratory protection
must be provided.
Personal Protective Equipment: General
Use good industrial hygiene practices in handling this material. Eyewash fountains and emergency showers are
required.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance: Odor:
Light yellowish liquid Mild characteristic odor
Physical State: pH:
Liquid 10-11
Vapor Pressure: Vapor Density:
Not Available Not Available
Boiling Point: Melting Point:
100掳C (212掳F) Not Applicable
Solubility (H2O): Specific Gravity:
Completely water soluble 1.0g/cm
Freezing Point: Evaporation Rate:
0掳C (32掳F) Not Available
VOC: Viscosity:
Not Available Efflux Time: 20-40 sec. (20掳C
(68掳F) 4 mm ISO-Cup)
Molecular Weight: Octanol/H2O Coeff.:
Solid content: 10% Not Available
Flash Point: Flash Point Method:
Not Available Not Available
Upper Flammability Limit (UFL): Lower Flammability Limit (LFL):
Not Available Not Available
Burning Rate: Auto Ignition:
Not Available Not Available
____________________________________________________________
Page 3 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
This is a stable material.
Chemical Stability: Conditions to Avoid
Keep away from heat, ignition sources and incompatible materials.
Incompatibility
Keep away from oxidizing agents, strongly alkaline and strongly acidic materials.
Hazardous Decomposition
Upon decomposition, this product emits carbon monoxide, carbon dioxide, and/or low molecular weight
hydrocarbons.
Possibility of Hazardous Reactions
Will not occur.
* * * Section 11 - Toxicological Information * * *
Acute Dose Effects
A: General Product Information
May cause severe irritation or burns to the eyes, skin, gastrointestinal tract, and respiratory system. Prolonged or
repeated exposure may cause more severe symptoms including chemical burns.
B: Component Analysis - LD50/LC50
Water (7732-18-5)
Oral LD50 Rat: >90 mL/kg
Oleic acid (112-80-1)
Oral LD50 Rat: 74 g/kg
Sodium hydroxide (1310-73-2)
Dermal LD50 Rabbit: 1350 mg/kg
Sodium chloride (7647-14-5)
Inhalation LC50 Rat: >42 g/m3/1H
Oral LD50 Rat: 3 g/kg
Dermal LD50 Rabbit: >10 g/kg
Carcinogenicity
A: General Product Information
No carcinogenicity data available for this product.
B: Component Carcinogenicity
None of this product's components are listed by ACGIH, IARC, OSHA, NIOSH, or NTP.
____________________________________________________________
Page 4 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 12 - Ecological Information * * *
Ecotoxicity
A: General Product Information
No information available for the product.
B: Component Analysis - Ecotoxicity - Aquatic Toxicity
Oleic acid (112-80-1)
Test & Species Conditions
96 Hr LC50 Pimephales promelas 205 mg/L static
Sodium hydroxide (1310-73-2)
Test & Species Conditions
96 Hr LC50 Oncorhynchus mykiss 45.4 mg/L static
Sodium chloride (7647-14-5)
Test & Species Conditions
96 Hr LC50 Lepomis macrochirus 9675 mg/L flow-through
96 Hr LC50 Lepomis macrochirus 12946 mg/L static
96 Hr LC50 Pimephales promelas 7650 mg/L static
48 Hr EC50 Daphnia magna 1000 mg/L
* * * Section 13 - Disposal Considerations * * *
US EPA Waste Number & Descriptions
A: General Product Information
Wastes must be tested using methods described in 40 CFR Part 261 to determine if it meets applicable definitions
of hazardous wastes.
B: Component Waste Numbers
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
See Section 7 for Handling Procedures. See Section 8 for Personal Protective Equipment recommendations.
* * * Section 14 - Transportation Information * * *
US DOT Information
Shipping Name: Not regulated as a hazardous material.
TDG Information
Shipping Name: Not regulated as a dangerous good.
____________________________________________________________
Page 5 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
* * * Section 15 - Regulatory Information * * *
US Federal Regulations
A: General Product Information
Components of this product have been checked against the non-confidential TSCA inventory by CAS Registry
Number. Components not identified on this non-confidential inventory are either exempt from listing (i.e.
polymers, hydrates) or are listed on the confidential inventory as declared by the supplier.
B: Component Analysis
This material contains one or more of the following chemicals required to be identified under SARA Section 302
(40 CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4).
Sodium hydroxide (1310-73-2)
CERCLA: 1000 lb final RQ; 454 kg final RQ
Acute Health: Yes Chronic Health: No Fire: No Pressure: No Reactive: No
State Regulations
A: General Product Information
Other state regulations may apply. Check individual state requirements.
B: Component Analysis - State
The following components appear on one or more of the following state hazardous substances lists:
Component CAS CA MA MN NJ PA RI
Oleic acid 112-80-1 No No No No Yes Yes
Sodium hydroxide 1310-73-2 Yes Yes Yes Yes Yes Yes
Canadian WHMIS Information
A: General Product Information
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all information required by CPR.
B: Component Analysis - WHMIS IDL
The following components are identified under the Canadian Hazardous Products Act Ingredient Disclosure List:
CAS # Minimum Concentration
Component
Oleic acid 112-80-1 1%
WHMIS Classification: D2B- Skin/Eye Irritation
Additional Regulatory Information
A: General Product Information
No additional information available.
____________________________________________________________
Page 6 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
Material Safety Data Sheet
Material Name: 8016 Osmo Wash and Care
B: Component Analysis - Inventory
Component CAS # TSCA CAN EEC
Water 7732-18-5 Yes DSL EINECS
Oleic acid 112-80-1 Yes DSL EINECS
Polyoxyethylene trimethyldecyl alcohol 69011-36-5 Yes DSL No
Sodium hydroxide 1310-73-2 Yes DSL EINECS
Sodium chloride 7647-14-5 Yes DSL EINECS
2-Methyl-3-isothiazolone 2682-20-4 Yes DSL EINECS
* * * Section 16 - Other Information * * *
Other Information
Disclaimer: Supplier gives no warranty of merchantibility or of fitness for a particular purpose. Any product
purchased is sold on the assumption the purchaser will make his own tests to determine the quality and suitability
of the product. Supplier expressly disclaims any and all liability for incidental and/or consequential property
damage arising out of the use of this product. No information provided shall be deemed to be a recommendation
to use any product in conflict with any existing patent rights. Read the Material Safety Data Sheet before handling
product.
Key/Legend
ACGIH = American Conference of Governmental Industrial Hygienists; ADG = Australian Code for the Transport
of Dangerous Goods by Road and Rail; ADR/RID = European Agreement of Dangerous Goods by Road/Rail; AS
= Standards Australia; DFG = Deutsche Forschungsgemeinschaft; DOT = Department of Transportation; DSL =
Domestic Substances List; EEC = European Economic Community; EINECS = European Inventory of Existing
Commercial Chemical Substances; ELINCS = European List of Notified Chemical Substances; EU = European
Union; HMIS = Hazardous Materials Identification System; IARC = International Agency for Research on Cancer;
IMO = International Maritime Organization; IATA = International Air Transport Association; MAK = Maximum
Concentration Value in the Workplace; NDSL = Non-Domestic Substances List; NFPA = National Fire Protection
Association; NOHSC = National Occupational Health & Safety Commission; NTP = National Toxicology Program;
STEL = Short-term Exposure Limit; TDG = Transportation of Dangerous Goods; TLV = Threshold Limit Value;
TSCA = Toxic Substances Control Act; TWA = Time Weighted Average
____________________________________________________________
Page 7 of 7 Issue Date: 01/04/07 Revision: 1.0000 Print Date: 9/17/2007
|