Material Safety Data Sheet
Enviro.blend, Inc. Type S Fluid 02/17/2005 Page 1
SECTION 1 - IDENTIFICATION OF SUBSTANCE AND COMPANY
Type S Fluid
Product Name:
Aliphatic Dibasic Esters
Chemical Name:
HMIS
Enviro.blend, Inc. Phone: 615-382-8215 Health 2
Supplier:
P.O. Box 329 Fax: 615-382-8216 Flammability 1
Springfield, TN 37172 Reactivity 0
Personal Protection B
Enviro.blend, Inc. 615-382-8215
Emergency Phone Numbers:
CHEMTREC (Transportation) 800-424-9300
SECTION 2 - INFORMATION ON INGREDIENTS
Hazardous and regulated components
Component CAS # % ACGIH ACGIH Carcinogen OSHA R.Q.
TWA STEL PEL lbs.
Dimethyl 1119-40-0 55- N/A N/A No N/A N/A
Glutarate 65
Dimethyl Adipate 627-93-0 10- N/A N/A No N/A N/A
25
Dimethyl 106-65-0 15- N/A N/A No N/A N/A
Succinate 25
Methanol 67-56-1 <0.2 200ppm 200ppm No 200ppm N/A
SECTION 3 - HAZARDS IDENTIFICATION
Effects of Overexposure:
May cause mild eye irritation. Prolonged skin contact may cause transient irritation.
Some individuals who have been overexposed by inhalation or skin contact have
experienced blurry vision. Inhalation overexposure may cause irritation in the upper
respiratory system.
SECTION 4 - FIRST AID MEASURES
Wash thoroughly with soap and water. Wash contaminated clothing before
Skin: ---------
reuse.
Immediately flush with plenty of water for at least 15 minutes; ensure water
Eyes: ---------
flushing of entire surface of eye and lid. Call a physician.
Move to fresh air. Give oxygen if breathing is difficult, give artificial
Inhalation: --
Material Safety Data Sheet
Enviro.blend, Inc. Type S Fluid 02/17/2005 Page 2
respiration if not breathing. Call a physician.
If swallowed, do not induce vomiting. Immediately give two glasses of water
Ingestion:----
or activated charcoal slurry. Never give anything by mouth to an unconscious
person. Call a physician.
To prepare activated charcoal slurry, suspend 50 grams activated charcoal in
Note:
400 ml. Water and mix thoroughly. Administer 350 ml. for an average adult.
SECTION 5 - EXPLOSION AND FIRE FIGHTING MEASURES
Flash Point Method Used Explosive Limits LEL UEL
2120 F TCC 0.9 8.0
Autoignition
6960 F
Extinguishing media:
CO2, Dry Chemical, Water Fog, Foam
Special Fire Fighting Procedures:
Wear MSHA/NIOSH approved self-contained breathing apparatus. Use water spray to
cool fire-exposed containers. Keep personnel removed and upwind of fire.
Unusual and Explosion Hazards:
Vapor forms explosive mixture with air. Hazardous gases / vapors produced in fire are
carbon monoxide.
SECTION 6 - ACCIDENTAL RELEASE / SPILL PROCEDURES
Steps to be taken in case material is released or spilled:
Use appropriate protective equipment. Review Section 5 before proceeding with clean
up. Remove all sources of heat, sparks, flame, impact, friction or electricity. Stop leak.
Dike to contain spill, cover with inert absorbent material, sweep up, and place in suitable
container. Flush area well with water. Keep spills and cleaning run-off out of municipal
sewers and open bodies of water.
SECTION 7 - HANDLING AND STORAGE
Keep container tightly closed. Store in cool, dry location. Do not mix with strong oxidants,
acids, or alkalies. Use with sufficient ventilation to keep employee exposure to airborne
concentrations below exposure limits.
Any use of this product in elevated temperature processes should be evaluated to establish and
maintain safe operating procedures.
SECTION 8 - PERSONAL PROTECTION
Material Safety Data Sheet
Enviro.blend, Inc. Type S Fluid 02/17/2005 Page 3
Respiratory Protection:
Use a NIOSH approved respirator when exposure to vapors of mists is anticipated.
Ventilation:
Local Exhaust is recommended when handling generated mists
Protective Gloves: Eye Protection:
Impervious (Butyl rubber) Safety Glasses or Splash Goggles (ANSI
Z87.1, 1968)
Other Protective Equipment:
Wear an impervious (Butyl rubber) apron and have eyewash facility close by.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
3850 to 4370 F
Boiling Point: pH:
1.092 @ 680 F. 5.3% by wt. @ 680 F
Specific Gravity: Solubility in Water:
0.2 mm Hg @ 680 F N/A
Vapor Pressure: % Solid by Weight:
N/I Liquid
Vapor Density: Material Is:
- 40 F
100
% Volatile by Volume: Freezing Point:
<0.1 N/I
Evaporation Rate: Melting Point:
(Butyl Acetate = 1.0)
Appearance and Odor:
Clear colorless liquid, sweet odor.
SECTION 10 - STABILITY AND REACTIVITY
Stable
Stability
None
Conditions to avoid:
Will not occur
Hazardous Polymerization:
None
Conditions to avoid:
Strong oxidizers, acids, and alkalies
Incompatible materials:
None under normal use conditions, oxides of carbon when
Hazardous decomposition
burned.
Products:
SECTION 11 - TOXICOLIGICAL INFORMATION
Acute Toxicity:
Oral LD50 (rat): ------ 8.19 g/kg
Dermal LD50 (rabbit): > 2.25 g/kg
-
Skin Irritation (rabbit): mild to severe
Eye Irritation (rabbit): moderate
Local effects:
Material Safety Data Sheet
Enviro.blend, Inc. Type S Fluid 02/17/2005 Page 4
Expected to be a low hazard for usual industrial handling or commercial use by trained
personnel.
SECTION 12 - ECOLOGICAL INFORMATION
Aquatic Toxicity:
Dimethyl Glutarate
96 hour LC50 (bluegill sunfish) 30.9 mg/L
Dibasic Esters
96 hour LC50 (fathead minnows) 18-24 mg/L
48 hour LC50 (Daphnia magna) 112-150 mg/L
This product does not contain any ozone depleting compounds
SECTION 13 - DISPOSAL CONSIDERATIONS
Waste Disposal Methods:
Material should be disposed of in accordance to current local and national regulations.
RCRA: It is the responsibility of the user to determine at time of disposal whether a
product or solution meets RCRA criteria for hazardous waste, as mixing, use,
contamination, or soils may render the resultant mixture hazardous.
SECTION 14 - TRANSPORTATION INFORMATION
Not Regulated
D.O.T. Shipping Name:
Not Regulated
Hazard Class:
N/A
Packing Group:
N/A
UN / NA Number:
None
D.O.T. Hazardous Substances:
None
Transport Label Required:
SECTION 15 - REGULATORY INFORMATION
Yes
US TSCA
Toxic Substances Control Act:
Yes
CANADA DSL
Domestic Substance List
Yes
EEC EINECS:
European Inventory of Existing
Chemical Substances.
Other Environmental The following components are defined as toxic chemicals subject to
Material Safety Data Sheet
Enviro.blend, Inc. Type S Fluid 02/17/2005 Page 5
reporting requirements of Section 313 of Title III and of 40 CFR 372 or
Information:
subject to other EPA regulations.
Component CAS # % TPQ RQ S 313 RCRA TSCA
Lbs) (Lbs) 12B
None
SECTION 16 - OTHER INFORMATION
When Type S Fluid is chemically reacted with alcohols, and methanol is recovered from that
reaction and purified for reuse by distillation, concentration of highly volatile impurities such as
hydrogen cyanide to toxicologically significant levels can occur in the waste stream from this
process.
NOTICE
As the conditions or methods of use are beyond our control, Enviro.blend, Inc. does not assume
any responsibility and expressly disclaims any liability for any use of this material. Information
contained herein has been obtained from the manufacturer and / or recognized technical sources.
The information is believed to be true and accurate, but all statements or suggestions are made
without warranty, express or implied, regarding accuracy of the information, the hazards
connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state, and local laws and regulations remains the
responsibility of the user.
|