Fast Break Degreaser Technical Data
Description
Environmentally friendly, biodegradable quick break degreaser with superior
degreasing properties. Formulated for use with oily water separators. Enviro Fast
Break Degreaser鈥檚 formulation consists of natural organic materials that satisfy
the most stringent solvent performance and ecological toxicity criteria and is
completely phosphate free. Enviro Fast Break Degreaser is water based with a
high flash point making it safe to handle and store
Environmental Considerations
The superior quick-break ability and efficiency of Enviro Fast Break Degreaser
make it the degreaser of choice in environmentally sensitive areas. Primary
degradation for the Enviro surfactant is essentially complete in 3 days. Enviro
Fast Break Degreaser contains no phosphates and does not cause
eutrophication in the water system. Enviro Fast Break Degreaser has no known
hazardous decomposition products.
Quick break properties
Enviro Fast Break Degreaser uses solvents that are considered 鈥淣ot Water
Endangering鈥? (German Classification). These solvents along with the naturally
derived surfactants clean oil and grease off surfaces by emulsification. When the
degreaser is rinsed off, the 鈥渂reak鈥? process commences and within a few minutes
most of the oil has broken and risen to the top of the solution where it can be
removed. The water remaining can be discharged to the sewer.
Multiple Applications
Use Enviro Fast Break Degreaser for cleaning and degreasing mining equipment
and machinery, industrial equipment, earthmoving equipment, washing parts,
engine cleaning, ship鈥檚 engines and bilges, concrete floors, service station
forecourts, kitchen and washroom floors and through high pressure washers.
Product is sea water compatible for use in marine applications.
Directions
1. Spray on or brush application: Apply liberally to surfaces that are to be
cleaned. Allow to stand for 5 minutes and then rinse off with water.
2. Tank Application: Soak for at least 15 minutes. Then remove, drain and rinse
off with water. Mild steel tank construction acceptable.
3. Parts washer: Set up as per manufacturer鈥檚 instructions.
4. Concrete cleaning; Apply to concrete and allow 2/3 minutes to soak in. Scrub
with yard broom and then rinse off with water.
Recommended dilutions
Heavy soils Use undiluted
Medium soils Dilute 1:4
Light soils Dilute 1:10
Pressure washers Dilute 1:100
Safety
Rubber gloves and safety glasses recommended.
Before using read the label and the Material Safety Data sheet for Hazard
Warnings and First Aid Instructions.