FLOOR COATING AND FINISHING MATERIAL
Floor Finishes & Waxes
AS TO SLIP RESISTANCE ONLY
17SU
For Use On:
Rubber Tile
Vinyl Tile
Terrazzo
Vinyl Asbestos
Quarry Tile
Asphalt Tile
Linoleum
DESCRIPTION:
A new generation, high gloss, user-friendly floor finish specially formulated
for daily Ultra-High-Speed (UHS) burnishing. The metal-interlocked,
acrylic-copolymer floor finish provides outstanding Ultra-High-Speed (UHS)
Daily Burnishable Finish burnish response and unsurpassed 鈥渨et look鈥? gloss. It is ideally suited for
a wide range of applications in the retail market and other areas where
frequent daily Ultra-High-Speed (UHS) burnish maintenance is done.
DIRECTIONS:
PREPARATION: If stripping is necessary, use a high quality stripper and
follow directions accordingly. If floor is in good condition and stripping is not
necessary, sweep up excess dirt and dust and then clean with a good
quality cleaner to remove dirt and oils. Follow with a thorough rinsing and
allow drying completely.
FINISHING: Apply 3 or 4 liberal coats of finish using a clean mop. Allow a
minimum of 30 minutes drying time between coats. Apply additional coat to
obtain desired gloss.
BURNISHING: Dust mop or sweep thoroughly. Clean floor with a neutral floor
cleaner diluted according to directions. Burnish using the appropriate pads.
RESTORATION: Dust mop or sweep thoroughly. Dilute restorer according to
manufacturer direction and apply to floor with clean mop or auto-scrubber.
Allow to dry to a haze and buff out with any type of UHS equipment-propane,
battery, or cord electric.
RECOATING: Dust mop or sweep thoroughly. Deep scrub using a neutral
floor cleaner diluted according to directions. Apply 1 or 2 liberal coats of
finish using a clean mop.
PRODUCT SPECIFICATIONS
Coverage: Up to 2000-2500
Non-volatile Solids: 20.0 + 0.5%
sq. ft. per gal.
Color: Milky emulsion
Removability: With instant type
Odor: Mild
strippers
pH: 8.0 鈥? 9.0
Detergent Resistance: Excellent
Dry/Recoat Time: 45 minutes min.
Heel Mark Resistance: Excellent
Slip Resistance: 0.5 min. by ASTM-
VOC Content: 0.44 lbs./gal.
D2047
Storage/Stability: 1 years
Leveling: Excellent
Weight Per Gallon: 8.66 lbs./gal.
Buffability: Dry burnish/Spray
Freeze/Thaw Stability: Keep from freezing
Buff
Misco Products Corporation Reading, PA (800) 548-4568 FAX (610) 926-1194
www.miscoprod.com
UHS MATERIAL SAFETY DATA SHEET N/A= Not Applicable
Prepared by: Regulatory Affairs Dept. Effective Date: 1/03 Revision: N/A
(Prepared According to 29 CFR 1910.1200)
SECTION 1-PRODUCT IDENTIFICATION AND SUPPLIER INFORMATION
Product Name: Fusion UHS
Manufacturer鈥檚 Name: Supplier鈥檚 Name:
Misco Products Corporation Generic Name: Daily Burnishable Finish
Manufacturer鈥檚 Address: Supplier鈥檚 Address:
Chemical Family: Acrylic Wax Blend
1048 Stinson Drive Reading, PA 19605 Formula: Proprietary
Manufacturer鈥檚 Phone #: (610) 926-4106 Supplier鈥檚 Phone #:
SECTION 2-INGREDIENT INFORMATION
CHEMICAL NAME CAS NO. WT. % PEL TWA-TLV STEL-TLV
Water 7732-18-5 to 100
Acrylic Copolymer Dispersion 63744-68-3 45 to 50
Modified Propylene Copolymer 25722-45-6 0 to 5
Modified Styrene Acrylic Copolymer N/A 0 to 5
Tributoxyethyl Phosphate 78-51-3 0 to 5
Diethylene Glycol Ethyl Ether 111-90-0 0 to 5
Preservative N/A <0.1
SECTION 3-PHYSICAL DATA SECTION 4-FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/A
Boiling Point (掳F): 212 F. Specific Gravity: 1.040
Upper Explosion Limit: N/A Lower Explosion Limit: N/A
Vapor Pressure: <20mm Hg @ 68 F. Vapor Density (Air=1): =1
Extinguishing Media: N/A
% Volatile: 70+ pH: 8.0 鈥? 9.0
Special Firefighting Procedures: Non Flammable
Solubility in Water: Complete Evaporation Rate (Water=1): <1
Unusual Fire and Explosion Hazards: N/A
Physical Description: Thin milky liquid with characteristic odor.
SECTION 5-REACTIVITY DATA
Stability: Stable Hazardous Polymerization: None
Hazards Decomposition Products: Will not occur Incompatibility (Materials to Avoid): None
SECTION 6-STORAGE AND HANDLING INFORMATION
Keep out of reach of children. For use by trained personnel only. Keep unauthorized personnel away when applying to floor. Keep container closed during storage. For
institutional and industrial use only. Avoid contact with eyes, skin and clothing. Avoid breathing of vapors. Use in well-ventilated area.
SECTION 7-HEALTH HAZARDS AND FIRST AID SECTION 8-SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use in well-ventilated areas only.
Effects of Overexposure:
Skin: Prolonged or repeated contact may cause dermatitis. Ventilation Requirements: Provide local exhaust to keep TLV of Section 2 in-
gredients below acceptable limit.
Eyes: Eye irritant. May cause redness or swelling.
Protective Gloves: Rubber or chemical resistant.
Inhalation: Prolonged exposure may cause dizziness, headache, nausea.
Eye Protection: Safety glasses or chemical splash goggles
Ingestion: May be irritating to the mouth, throat, and gastrointestinal system.
Vomiting and diarrhea expected with large doses. Other Protective Equipment: Chemical resistant footwear e.g. rubber boots to
protect feet. Long pants to protect legs.
First Aid Procedures: SECTION 9-SPILL OR LEAK PROCEDURES
Steps to be taken in Case Material is Released or Spilled: Floors will become
Skin: Flush with water. Seek medical attention if irritation persists.
slippery. Avoid walking in product. Keep unessential personnel away. Mop up or
Eyes: Flush with large quantities of water, holding eyelids open. Seek medical
otherwise absorb and hold disposal. Avoid discharge to sewer or open waterways.
attention.
Waste Disposal Method: Any method in accordance with local, state and federal
Inhalation: Remove victim to fresh air and monitor. Seek medical attention if
laws. Best method is to recycle or reuse for intended purpose. Consult local
symptoms persist.
authorities for disposal in public sewer. Do not dispose of into storm drain,
Ingestion: Dilute with 2 glasses of water. Seek medical attention if symptoms
stream, river or to ground. Rinse container thoroughly before discarding in trash.
persist.
SECTION 10-REGULATORY INFORMATION
HMIS Hazardous Materials
SARA Title III - Section 311/312 -Hazard Categories: Shipping Information:
No - Fire Hazard FOR CONTAINERS > 1 Gallon : Liquid Floor Wax Identification System
No - Sudden Release of Pressure Hazard Health 1
No - Reactivity Hazard FOR 1 GALLON CONTAINERS : Liquid Floor Wax Flammability 0
Yes - Immediate (acute) Health Hazard Reactivity 0
No - Delayed (chronic) Health Hazard FOR CONTAINERS < 1 GALLON : Liquid Floor Wax Personal Protection A
FOR EMERGENCY MEDICAL OR TRANSPORT INFORMATION: CHEM-TEL, Inc. @ 800-255-3924 (24 hours, 7 days per week)
This product contains the following toxic chemical(s) subject to the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act
of 1986 and of 40 CFR 372.
CAS# Chemical Name Percent by Weight
None
This product contains the following chemical(s) which have been established to be either a carcinogen or suspected carcinogen.
CAS# Chemical Name Percent by Weight
None
SECTION 11-OTHER INFORMATION
This company cannot anticipate all conditions of handling and use of this product. Therefore, this company accepts no responsibility for results obtained by the
application of this information, or the safety and suitability of our products either alone or in combination with other products. It is the responsibility of the user to
provide a safe workplace, using the health and safety information contained herein as a guide. This company will accept no liability for damages or loss incurred from
the improper handling and use of this product
|